Release 2.0.2 (#1279)

- cleanup

.github/pull_request_template.md

@@ -0,0 +1,24 @@
+<!--
+Please check the following before you make a pull request:
+
+* The branch you are making the pull request from (in your own fork) has a unique and descriptive
+  name. Do not make a pull request directly from your copy of `main`.
+* If you are submitting translation files, only submit the files that you have added translations
+  to, not the other .ts files that may have been updated in the process.
+* Make sure your contribution follows the style guide and other requirements mentioned in the
+  CONTRIBUTING.md file in the repository.
+* Fill in the Summary section below, and if relevant, mention the issue numbers related to the PR.
+-->
+
+**Summary:**
+
+**Related Issue(s):**
+
+**Reviewer's Checklist:**
+
+* [ ] The header of all files contain a reference to the repository license
+* [ ] The overall test coverage is increased or remains the same as before
+* [ ] All tests are passing
+* [ ] All flake8 checks are passing and the style guide is followed
+* [ ] Documentation (as docstrings) is complete and understandable
+* [ ] Only files that have been actively changed are committed

.github/workflows/syntax.yml

@@ -2,28 +2,32 @@ name: flake8
 
 on:
   push:
-    branches: [ main, testing, dev ]
+    branches: 
+      - main
+      - patch
   pull_request:
-    branches: [ main, testing, dev ]
+    branches:
+      - main
+      - patch
 
 jobs:
   checkSyntax:
     runs-on: ubuntu-latest
     steps:
       - name: Python Setup
-        uses: actions/setup-python@v2
+        uses: actions/setup-python@v4
         with:
           python-version: 3
           architecture: x64
       - name: Checkout Source
-        uses: actions/checkout@v2
+        uses: actions/checkout@v3
       - name: Install flake8
         run: pip install flake8
       - name: Syntax Error Check
         run: |
-          flake8 nw --count --select=E9,F63,F7,F82 --show-source --statistics
+          flake8 novelwriter --count --select=E9,F63,F7,F82 --show-source --statistics
           flake8 tests --count --select=E9,F63,F7,F82 --show-source --statistics
       - name: Coding Style Violations
         run: | 
-          flake8 nw --count --max-line-length=99 --ignore E203,E221,E226,E228,E241,E251,E261,E266,E302,E305 --show-source --statistics
-          flake8 tests --count --max-line-length=99 --ignore E203,E221,E226,E228,E241,E251,E261,E266,E302,E305 --show-source --statistics
+          flake8 novelwriter --count --max-line-length=99 --ignore E133,E221,E226,E228,E241,W503 --show-source --statistics
+          flake8 tests --count --max-line-length=99 --ignore E133,E221,E226,E228,E241,W503 --show-source --statistics

.github/workflows/test_linux.yml

@@ -0,0 +1,43 @@
+name: Linux
+
+on:
+  push:
+    branches: 
+      - main
+      - patch
+  pull_request:
+    branches:
+      - main
+      - patch
+
+jobs:
+  testLinux:
+    strategy:
+      matrix:
+        python-version: ["3.7", "3.8", "3.9", "3.10", "3.11"]
+    runs-on: ubuntu-latest
+    steps:
+      - name: Python Setup
+        uses: actions/setup-python@v4
+        with:
+          python-version: ${{ matrix.python-version }}
+          architecture: x64
+      - name: Install Packages (apt)
+        run: |
+          sudo apt update
+          sudo apt install libenchant-2-dev qttools5-dev-tools aspell-en
+      - name: Checkout Source
+        uses: actions/checkout@v3
+      - name: Install Dependencies (pip)
+        run: |
+          pip install --upgrade pip
+          pip install -r requirements.txt
+          pip install -r requirements-dev.txt
+      - name: Run Build Commands
+        run: python setup.py qtlrelease sample
+      - name: Run Tests
+        run: |
+          export QT_QPA_PLATFORM=offscreen
+          pytest -v --cov=novelwriter --timeout=60
+      - name: Upload to Codecov
+        uses: codecov/codecov-action@v3

.github/workflows/test_linux_3.6.yml

@@ -1,33 +0,0 @@
-name: Linux (3.6)
-
-on:
-  push:
-    branches: [ main, testing, dev ]
-  pull_request:
-    branches: [ main, testing, dev ]
-
-jobs:
-  testLinux36:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Python Setup
-        uses: actions/setup-python@v2
-        with:
-          python-version: 3.6
-          architecture: x64
-      - name: Install Packages
-        run: |
-          sudo apt update
-          sudo apt install libenchant-dev qt5-default
-      - name: Checkout Source
-        uses: actions/checkout@v2
-      - name: Install Dependencies
-        run: |
-          pip install --upgrade pip
-          pip install -r requirements.txt
-          pip install pytest-timeout
-          pip install pytest-qt
-      - name: Run Tests
-        run: |
-          export QT_QPA_PLATFORM=offscreen
-          pytest -v --timeout=60

.github/workflows/test_linux_3.7.yml

@@ -1,33 +0,0 @@
-name: Linux (3.7)
-
-on:
-  push:
-    branches: [ main, testing, dev ]
-  pull_request:
-    branches: [ main, testing, dev ]
-
-jobs:
-  testLinux37:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Python Setup
-        uses: actions/setup-python@v2
-        with:
-          python-version: 3.7
-          architecture: x64
-      - name: Install Packages
-        run: |
-          sudo apt update
-          sudo apt install libenchant-dev qt5-default
-      - name: Checkout Source
-        uses: actions/checkout@v2
-      - name: Install Dependencies
-        run: |
-          pip install --upgrade pip
-          pip install -r requirements.txt
-          pip install pytest-timeout
-          pip install pytest-qt
-      - name: Run Tests
-        run: |
-          export QT_QPA_PLATFORM=offscreen
-          pytest -v --timeout=60

.github/workflows/test_linux_3.8.yml

@@ -1,37 +0,0 @@
-name: Linux (3.8)
-
-on:
-  push:
-    branches: [ main, testing, dev ]
-  pull_request:
-    branches: [ main, testing, dev ]
-
-jobs:
-  testLinux38:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Python Setup
-        uses: actions/setup-python@v2
-        with:
-          python-version: 3.8
-          architecture: x64
-      - name: Install Packages
-        run: |
-          sudo apt update
-          sudo apt install libenchant-dev qt5-default
-      - name: Checkout Source
-        uses: actions/checkout@v2
-      - name: Install Dependencies
-        run: |
-          pip install --upgrade pip
-          pip install -r requirements.txt
-          pip install pytest-timeout
-          pip install pytest-cov
-          pip install pytest-qt
-          pip install codecov
-      - name: Run Tests
-        run: |
-          export QT_QPA_PLATFORM=offscreen
-          pytest -v --cov=nw --timeout=60
-      - name: Upload to Codecov
-        uses: codecov/codecov-action@v1

.github/workflows/test_linux_3.9.yml

@@ -1,37 +0,0 @@
-name: Linux (3.9)
-
-on:
-  push:
-    branches: [ main, testing, dev ]
-  pull_request:
-    branches: [ main, testing, dev ]
-
-jobs:
-  testLinux39:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Python Setup
-        uses: actions/setup-python@v2
-        with:
-          python-version: 3.9
-          architecture: x64
-      - name: Install Packages
-        run: |
-          sudo apt update
-          sudo apt install libenchant-dev qt5-default
-      - name: Checkout Source
-        uses: actions/checkout@v2
-      - name: Install Dependencies
-        run: |
-          pip install --upgrade pip
-          pip install -r requirements.txt
-          pip install pytest-timeout
-          pip install pytest-cov
-          pip install pytest-qt
-          pip install codecov
-      - name: Run Tests
-        run: |
-          export QT_QPA_PLATFORM=offscreen
-          pytest -v --cov=nw --timeout=60
-      - name: Upload to Codecov
-        uses: codecov/codecov-action@v1

.github/workflows/test_mac.yml

@@ -1,37 +1,38 @@
-name: macOS (3.9)
+name: macOS
 
 on:
   push:
-    branches: [ main, testing, dev ]
+    branches: 
+      - main
+      - patch
   pull_request:
-    branches: [ main, testing, dev ]
+    branches:
+      - main
+      - patch
 
 jobs:
-  testMac38:
+  testMac:
     runs-on: macos-latest
     steps:
       - name: Python Setup
-        uses: actions/setup-python@v2
+        uses: actions/setup-python@v4
         with:
-          python-version: 3.9
+          python-version: "3.10"
           architecture: x64
       - name: Install Packages
         run: |
           brew install enchant
       - name: Checkout Source
-        uses: actions/checkout@v2
+        uses: actions/checkout@v3
       - name: Install Dependencies
         run: |
           pip install --upgrade pip
           pip install -r requirements.txt
+          pip install -r requirements-dev.txt
           pip install pyobjc
-          pip install pytest-timeout
-          pip install pytest-cov
-          pip install pytest-qt
-          pip install codecov
       - name: Run Tests
         run: |
           export QT_QPA_PLATFORM=offscreen
-          pytest -v --cov=nw --timeout=60
+          pytest -v --cov=novelwriter --timeout=60
       - name: Upload to Codecov
-        uses: codecov/codecov-action@v1
+        uses: codecov/codecov-action@v3

.github/workflows/test_win.yml

@@ -1,32 +1,33 @@
-name: Windows (3.9)
+name: Windows
 
 on:
   push:
-    branches: [ main, testing, dev ]
+    branches: 
+      - main
+      - patch
   pull_request:
-    branches: [ main, testing, dev ]
+    branches:
+      - main
+      - patch
 
 jobs:
-  testWin38:
+  testWin:
     runs-on: windows-latest
     steps:
       - name: Python Setup
-        uses: actions/setup-python@v2
+        uses: actions/setup-python@v4
         with:
-          python-version: 3.9
+          python-version: "3.10"
           architecture: x64
       - name: Checkout Source
-        uses: actions/checkout@v2
+        uses: actions/checkout@v3
       - name: Install Dependencies
         run: |
           pip install --upgrade pip
           pip install -r requirements.txt
-          pip install pytest-timeout
-          pip install pytest-cov
-          pip install pytest-qt
-          pip install codecov
+          pip install -r requirements-dev.txt
       - name: Run Tests
         run: |
-          pytest -v --cov=nw --timeout=60
+          pytest -v --cov=novelwriter --timeout=60
       - name: Upload to Codecov
-        uses: codecov/codecov-action@v1
+        uses: codecov/codecov-action@v3

.gitignore

@@ -1,28 +1,38 @@
 # Setup/Install
 /MANIFEST
-/dist/
 /build/
 /deploy/
+/dist/
+/dist_*/
 *.spec
 *.egg-info
 setup.iss
-novelwriter.desktop
+/novelwriter.desktop
+/novelWriter.pyw
+
+# Translations
+/novelwriter/assets/i18n/*.qm
+.qmake.stash
 i18n/*.qm
 i18n/*.qph
 
 # Documentation
 /docs/build/
+/novelwriter/assets/help/
+/novelwriter/assets/manual.pdf
 *.qch
 *.qhc
+.~lock.*
 
 # Python Temp
 __pycache__
 *.pyc
 
 # Sample Project
-/nw/assets/sample.zip
+/novelwriter/assets/sample.zip
 /sample/cache
 /sample/meta
+/sample/versions
 *.bak
 *.lock
 ToC.txt
@@ -41,3 +51,4 @@ ToC.txt
 
 # Coverage
 /.coverage
+/coverage.*

.readthedocs.yml

@@ -20,6 +20,5 @@ formats:
 
 # Optionally set the version of Python and requirements required to build your docs
 python:
-  version: 3.7
   install:
     - requirements: docs/source/requirements.txt

CODE_OF_CONDUCT.md

@@ -2,75 +2,131 @@
 
 ## Our Pledge
 
-In the interest of fostering an open and welcoming environment, we as
-contributors and maintainers pledge to making participation in our project and
-our community a harassment-free experience for everyone, regardless of age, body
-size, disability, ethnicity, sex characteristics, gender identity and expression,
-level of experience, education, socio-economic status, nationality, personal
-appearance, race, religion, or sexual identity and orientation.
+We as members, contributors, and leaders pledge to make participation in our
+community a harassment-free experience for everyone, regardless of age, body
+size, visible or invisible disability, ethnicity, sex characteristics, gender
+identity and expression, level of experience, education, socio-economic status,
+nationality, personal appearance, race, caste, color, religion, or sexual
+identity and orientation.
+
+We pledge to act and interact in ways that contribute to an open, welcoming,
+diverse, inclusive, and healthy community.
 
 ## Our Standards
 
-Examples of behavior that contributes to creating a positive environment
-include:
+Examples of behavior that contributes to a positive environment for our
+community include:
 
-* Using welcoming and inclusive language
-* Being respectful of differing viewpoints and experiences
-* Gracefully accepting constructive criticism
-* Focusing on what is best for the community
-* Showing empathy towards other community members
+* Demonstrating empathy and kindness toward other people
+* Being respectful of differing opinions, viewpoints, and experiences
+* Giving and gracefully accepting constructive feedback
+* Accepting responsibility and apologizing to those affected by our mistakes,
+  and learning from the experience
+* Focusing on what is best not just for us as individuals, but for the overall
+  community
 
-Examples of unacceptable behavior by participants include:
+Examples of unacceptable behavior include:
 
-* The use of sexualized language or imagery and unwelcome sexual attention or
-  advances
-* Trolling, insulting/derogatory comments, and personal or political attacks
+* The use of sexualized language or imagery, and sexual attention or advances of
+  any kind
+* Trolling, insulting or derogatory comments, and personal or political attacks
 * Public or private harassment
-* Publishing others' private information, such as a physical or electronic
-  address, without explicit permission
+* Publishing others' private information, such as a physical or email address,
+  without their explicit permission
 * Other conduct which could reasonably be considered inappropriate in a
   professional setting
 
-## Our Responsibilities
+## Enforcement Responsibilities
 
-Project maintainers are responsible for clarifying the standards of acceptable
-behavior and are expected to take appropriate and fair corrective action in
-response to any instances of unacceptable behavior.
+Community leaders are responsible for clarifying and enforcing our standards of
+acceptable behavior and will take appropriate and fair corrective action in
+response to any behavior that they deem inappropriate, threatening, offensive,
+or harmful.
 
-Project maintainers have the right and responsibility to remove, edit, or
-reject comments, commits, code, wiki edits, issues, and other contributions
-that are not aligned to this Code of Conduct, or to ban temporarily or
-permanently any contributor for other behaviors that they deem inappropriate,
-threatening, offensive, or harmful.
+Community leaders have the right and responsibility to remove, edit, or reject
+comments, commits, code, wiki edits, issues, and other contributions that are
+not aligned to this Code of Conduct, and will communicate reasons for moderation
+decisions when appropriate.
 
 ## Scope
 
-This Code of Conduct applies both within project spaces and in public spaces
-when an individual is representing the project or its community. Examples of
-representing a project or community include using an official project e-mail
-address, posting via an official social media account, or acting as an appointed
-representative at an online or offline event. Representation of a project may be
-further defined and clarified by project maintainers.
+This Code of Conduct applies within all community spaces, and also applies when
+an individual is officially representing the community in public spaces.
+Examples of representing our community include using an official e-mail address,
+posting via an official social media account, or acting as an appointed
+representative at an online or offline event.
 
 ## Enforcement
 
 Instances of abusive, harassing, or otherwise unacceptable behavior may be
-reported by contacting the project leader at issues (at) novelwriter.io. All
-complaints will be reviewed and investigated and will result in a response that
-is deemed necessary and appropriate to the circumstances. The project team is
-obligated to maintain confidentiality with regard to the reporter of an incident.
-Further details of specific enforcement policies may be posted separately.
+reported to the community leaders responsible for enforcement at issues (at)
+novelwriter.io. All complaints will be reviewed and investigated promptly and
+fairly.
 
-Project maintainers who do not follow or enforce the Code of Conduct in good
-faith may face temporary or permanent repercussions as determined by other
-members of the project's leadership.
+All community leaders are obligated to respect the privacy and security of the
+reporter of any incident.
+
+## Enforcement Guidelines
+
+Community leaders will follow these Community Impact Guidelines in determining
+the consequences for any action they deem in violation of this Code of Conduct:
+
+### 1. Correction
+
+**Community Impact**: Use of inappropriate language or other behavior deemed
+unprofessional or unwelcome in the community.
+
+**Consequence**: A private, written warning from community leaders, providing
+clarity around the nature of the violation and an explanation of why the
+behavior was inappropriate. A public apology may be requested.
+
+### 2. Warning
+
+**Community Impact**: A violation through a single incident or series of
+actions.
+
+**Consequence**: A warning with consequences for continued behavior. No
+interaction with the people involved, including unsolicited interaction with
+those enforcing the Code of Conduct, for a specified period of time. This
+includes avoiding interactions in community spaces as well as external channels
+like social media. Violating these terms may lead to a temporary or permanent
+ban.
+
+### 3. Temporary Ban
+
+**Community Impact**: A serious violation of community standards, including
+sustained inappropriate behavior.
+
+**Consequence**: A temporary ban from any sort of interaction or public
+communication with the community for a specified period of time. No public or
+private interaction with the people involved, including unsolicited interaction
+with those enforcing the Code of Conduct, is allowed during this period.
+Violating these terms may lead to a permanent ban.
+
+### 4. Permanent Ban
+
+**Community Impact**: Demonstrating a pattern of violation of community
+standards, including sustained inappropriate behavior, harassment of an
+individual, or aggression toward or disparagement of classes of individuals.
+
+**Consequence**: A permanent ban from any sort of public interaction within the
+community.
 
 ## Attribution
 
-This Code of Conduct is adapted from the [Contributor Covenant][homepage], version 1.4,
-available at https://www.contributor-covenant.org/version/1/4/code-of-conduct.html
+This Code of Conduct is adapted from the [Contributor Covenant][homepage],
+version 2.1, available at
+[https://www.contributor-covenant.org/version/2/1/code_of_conduct.html][v2.1].
+
+Community Impact Guidelines were inspired by
+[Mozilla's code of conduct enforcement ladder][Mozilla CoC].
+
+For answers to common questions about this code of conduct, see the FAQ at
+[https://www.contributor-covenant.org/faq][FAQ]. Translations are available at
+[https://www.contributor-covenant.org/translations][translations].
 
 [homepage]: https://www.contributor-covenant.org
-
-For answers to common questions about this code of conduct, see
-https://www.contributor-covenant.org/faq
+[v2.1]: https://www.contributor-covenant.org/version/2/1/code_of_conduct.html
+[Mozilla CoC]: https://github.com/mozilla/diversity
+[FAQ]: https://www.contributor-covenant.org/faq
+[translations]: https://www.contributor-covenant.org/translations

CONTRIBUTING.md

@@ -1,39 +1,47 @@
 # Contributing Guide
 
 When contributing to this repository, please first discuss the change you wish to make via the
-issue tracker or the discussions page with the owner of this repository before making a change. If
-you just want to make a minor correction, like fix a typo or similar, feel free to just make a pull
-request directly.
+issue tracker or the discussions page with the owner of this repository. Especially if it is
+regarding new features. If you just want to make a minor correction, like fix a typo or similar,
+feel free to just make a pull request directly.
 
-## Branching Structure
+The following contributions are welcome:
 
-There are three protected branches on this repository. They are used in the following way:
+* Bugfixes for new or existing bugs. Please also report new bugs in the issue tracker even if you
+  also provide a fix. It makes it easier to keep track of what has been fixed and when.
+* Translations via the [crowdin project page](https://crowdin.com/project/novelwriter).
+* Improvements to the documentation. Particularly if the documentation is unclear. Please don't
+  make any larger changes to the documentation without discussing if with the maintainer first.
+* Adaptations, installation or packaging features targeting specific operating systems.
 
-* `main` – This is the Stable branch. It is used for releases and subsequent patches. No
-  development code should be merged into this branch starting from version 1.0.
-* `dev` – This is the Unstable (development) branch. It is where new features are merged, and where
-  pre-releases are taken from.
-* `testing` – This is the Testing branch. It is populated from the `dev` branch for pre-releases
-  that need a longer testing phase.
+Please do not:
 
-Stable releases and patches will be tagged in the `main` branch, pre-releases may be tagged from
-either `testing` or `dev` branch.
+* Make a pull request that restructures or reformats existing code. If you think some parts of the
+  code could be improved, please make an issue thread or start a discussion. The same applies to
+  any text document in the repository.
 
-### What Branch to Use for Contributions
+## Pull Requests
 
-* If your contribution is a fix for the latest stable release, branch from the `main` branch.
-* If your contribution is a fix for the latest testing release, branch from the `testing` branch.
-* If your contribution is a new feature, branch from the `dev` branch.
+This project follows the [OneFlow](https://www.endoflineblog.com/oneflow-a-git-branching-model-and-workflow)
+model. The `main` branch is the default branch. For general changes, please make a new branch in
+your own fork from the current `main` branch. Do not make pull requests from your own `main`
+branch.
 
-## Pull Request Process
+**Note:** If your contribution is a bugfix for a specific version, please make a bugfix branch from
+the tag you want the fix to be applied to, not directly from the `main` branch. This is important.
 
-1. Make sure your code passes all tests and conforms to the style guide. You can check that the
-   code conforms by running `flake8` from the root of the project folder.
-2. Please provide a complete description of the changes in the pull request, and a summary that can
-   be copied into the [CHANGELOG](CHANGELOG.md). Remember to reference any issue related by
-   providing the issue number.
-3. Do not change the version number. Version numbers are bumped in separate release pull requests
-   by the maintainer.
+Also check the following:
+
+* Make sure your code passes all tests and conforms to the style guide. You can check that the
+  code generally conforms by running the Python linting tool `flake8` from the root of the project
+  folder, although it doesn't check everything. The same check is also run on pull requests by the
+  maintainer.
+* Please provide a description of the changes in the pull request under the summary section of the
+  pull request template, and reference any related issues by providing the issue number.
+* Do not change the version number.
+* Do not submit files that were not actively changed but have otherwise been modifed. This is
+  mostly an issue with translation files. The language tool may update all files in the `i18n`
+  folder.
 
 ## Code of Conduct
 
@@ -52,92 +60,63 @@ Please see the [CODE_OF_CONDUCT](CODE_OF_CONDUCT.md) file for the full text.
 ## Code Style Guide
 
 The source code of novelWriter broadly follows the [PEP8](https://www.python.org/dev/peps/pep-0008)
-style guide, but with a few modifications and exceptions listed below.
+style guide, but with a few exceptions. Some key points are listed below.
 
-### Line Length
+**Line Length:**
 
-For this project, source lines should stay within the 79 and 99 character limits described by PEP8.
-79 characters is often too restrictive, so 99 character lines are acceptable when that is more
-practical. Readability has priority. Generally, if a code statement requires multiple lines, the
-lines should wrap at 79 characters, not 99. If wrapping can be avoided by going to 99, then that is
-generally preferrable.
+* Source code lines can extend to the upper limit of 99 characters allowed by PEP8. 79 characters
+  is the recommended line length in PEP8, but this is often too restrictive. 99 characters are
+  acceptable when that is more practical. Readability has priority. Generally, if a code statement
+  requires multiple lines, the lines should wrap at 79 characters if possible. If wrapping can be
+  avoided by going to 99, then that is generally preferrable.
+* For text files, the text should be wrapped at 99 character. The exception is markdown image tags
+  and urls which can run past that limit.
 
-For text files, the text should also be wrapped at 99 character. The exception is markdown image
-tags and urls.
+**Variable and Function Names**
 
-Please do not submit pull requests that re-wrap existing source or text unless this has been
-discussed beforehand.
+* PEP8 allows for camelCase for consistency with existing code. The Qt library uses camelCase, so
+  the Python source code does too.
+* The exception to the above is for constants. They should always be in upper snake case, like PEP8
+  states.
+
+**Spaces, Indentation and Alignment**
+
+* Only indentation by multiples of 4 spaces is allowed.
+* No trailing spaces should occur on any line in the source code, including empty lines.
+* Ideally, a function should end on the same indention level as it started. Exceptions are allowed
+  if it makes the code easier to follow.
+* Aligning operators and attributes in columns with multiple spaces is not allowed by PEP8. The
+  rule is relaxed a bit here. Alignment is allowed when populating large dictionaries or setting
+  many class attributes. It does improve readability in such cases, but should not be overused.
 
 ### Linting with `flake8`
 
-An excellent tool for checking Python code for errors and coding style is `flake8`. The
-documentation is available [here](https://flake8.pycqa.org/en/latest/).
+A good tool for checking Python code for errors and code style is `flake8`. The documentation is
+available [here](https://flake8.pycqa.org/en/latest/).
 
 The `setup.cfg` file in the root of this project has the following settings for `flake8` that
-matches the coding standard:
+matches the above code style:
 ```conf
 [flake8]
-ignore = E203,E221,E226,E228,E241,E251,E261,E266,E302,E305
+ignore = E133,E221,E226,E228,E241,W503
 max-line-length = 99
 exclude = docs/*
 ```
 
 The command line equivalent, with reporting, is:
 ```bash
-flake8 . --count --ignore E203,E221,E226,E228,E241,E251,E261,E266,E302,E305 --max-line-length=99 --show-source --statistics
+flake8 . --count --ignore E133,E221,E226,E228,E241,W503 --max-line-length=99 --show-source --statistics
 ```
 
-Passing this check is required before contributions are merged into the `main` branch. This is
-checked automatically when you make a pull request. You can run the `flake8` command locally to
-check beforehand. The full command will give you a detailed description of the code lines that do
-not conform to the standard.
+Passing this check is required before contributions are merged. This is checked automatically when
+you make a pull request. You can run the `flake8` command locally to check beforehand. The full
+command will give you a detailed description of the code lines that do not conform to the standard.
 
-## Ignored Errors
+Two of the ignored errors are due to the relaxed restriction on column alignment, these are the
+E221 and E241 error codes.
 
-Some `flake8` error codes are ignored for this project for various reasons. The source also uses
-camelCase function and variable names. This is the standard for the Qt libraries novelWriter
-integrates with. It also happens to be the author's personal preferences.
-
-The reason behind the other ignored error codes are listed below. Many of them are due to PEP8 not
-permitting column alignment as opposed to many other coding styles, like for instance for Go. I
-find them useful in regions of bulk value assignments. There's a reason why tables are more
-readable than lists. They should be used sparingly though.
-
-The ignored errors are all `pycodestyle` errors, and they are documented
-[here](https://pycodestyle.pycqa.org/en/latest/intro.html#error-codes).
-
-**E203:** whitespace before ‘:’  
-**Reason:** Column alignment.
-
-**E221:** multiple spaces before operator  
-**Reason:** Column alignment.
-
-**E226:** missing whitespace around arithmetic operator  
-**Reason:** This doesn't actually follow the PEP8 recommendation of grouping longer equations by
-operator precedence like `2*a + 3*b` instead of `a * a + 3 * b`. Generally, don't use spaces around
-`*`, `/` and `**`, but _do_ use spaces around `+` and `-`. For appending strings, the spaces can be
-dropped. Don't use the `+` operator for appending multiple strings. Use formatting instead.
-
-**E228** missing whitespace around modulo operator  
-**Reason:** See reason for E226. Formatting `%` like `/` and `*` should be possible.
-
-**E241:** multiple spaces after ‘,’  
-**Reason:** Column alignment.
-
-**E251:** unexpected spaces around keyword / parameter equals  
-**Reason:** Column alignment.
-
-**E261:** at least two spaces before inline comment  
-**Reason:** With syntax highlighting, this one doesn't make much sense.
-
-**E266:** too many leading ‘#’ for block comment  
-**Reason:** In the source multiple `#`s is sometimes used to indicate importance or heading level,
-like markdown headers.
-
-**E302:** expected 2 blank lines, found 0  
-**Reason:** Applies to classes. Instead, end classes with a comment like `# END Class ClassName` to
-make it easier to see which class just ended. The double line break is then redundant.
-
-**E305:** expected 2 blank lines after end of function or class  
-**Reason:** Instead, _always_ end a function with a `return`, preferably indented at function
-level. The end of the function is then clear.
+The code E226 is ignored becuse it doesn't actually follow the
+[PEP8 recommendation](https://www.python.org/dev/peps/pep-0008/#other-recommendations)
+of grouping longer equations by operator precedence like `2*a + 3*b` instead of `a * a + 3 * b`.
+Generally, don't use spaces around `*`, `/` and `**`, but _do_ use spaces around `+` and `-`.
+The same applies to the modulo operator `%`, hence E228 is also ignored.

CREDITS.md

@@ -0,0 +1,46 @@
+# Credits
+
+## Main Developer
+
+* Veronica Berglyd Olsen (@vkbo)
+
+## Main Contributors
+
+* Concept: Marian Lückhof (@Number042)
+* Internationalisation: Bruno Meneguello (@bkmeneguello)
+
+## Translations
+
+The default language is English (UK) with English (US) as an option.
+
+* Dutch: Martijn van der Kleijn (@mvdkleijn)
+* French: Jan Lüdke (@jyhelle)
+* German: Myian (@heymyian)
+* Latin American Spanish: Tommy Marplatt (@tmarplatt)
+* Norwegian: Veronica Berglyd Olsen (@vkbo)
+* Portuguese: Bruno Meneguello (@bkmeneguello)
+* Simplified Chinese: Qianzhi Long (@longqzh)
+
+## Libraries
+
+The following libraries are dependencies of novelWriter:
+
+* Qt5 by [Qt Company](https://www.qt.io/)
+* PyQt5 by [Riverbank Computing](https://www.riverbankcomputing.com/software/pyqt/)
+* lxml by [Martijn Faassen](https://lxml.de/)
+* Enchant by [Dom Lachowicz](https://abiword.github.io/enchant/)
+* PyEnchant by [Dimitri Merejkowsky](https://pyenchant.github.io/pyenchant/)
+
+## Assets
+
+Some of the assets bundled with novelWriter were adapted from the following sources:
+
+* Typicons icons by [Stephen Hutchings](https://github.com/stephenhutchings/typicons.font) (CC BY-SA 4.0)
+* Tomorrow syntax themes by Chris Kempson (MIT License)
+* Owl syntax themes by Sarah Drasner (MIT License)
+* Solarized themes by Ethan Schoonover, added by @nullbasis (MIT License)
+
+## Special Mentions
+
+Additional thanks to @johnblommers who was an early user and who has provided a lot of very useful
+feedback over the years.

MANIFEST.in

@@ -1,6 +1,7 @@
 include setup.py
 include LICENSE.md
+include CREDITS.md
 include CHANGELOG.md
 recursive-include setup *
-recursive-include nw/assets *
+recursive-include novelwriter/assets *
 recursive-include sample *.nwx *.nwd

README.md

@@ -1,87 +1,126 @@
 # novelWriter
 
-[![Linux (3.6)](https://github.com/vkbo/novelWriter/workflows/Linux%20(3.6)/badge.svg?branch=main)](https://github.com/vkbo/novelWriter/actions)
-[![Linux (3.7)](https://github.com/vkbo/novelWriter/workflows/Linux%20(3.7)/badge.svg?branch=main)](https://github.com/vkbo/novelWriter/actions)
-[![Linux (3.8)](https://github.com/vkbo/novelWriter/workflows/Linux%20(3.8)/badge.svg?branch=main)](https://github.com/vkbo/novelWriter/actions)
-[![Linux (3.9)](https://github.com/vkbo/novelWriter/workflows/Linux%20(3.9)/badge.svg?branch=main)](https://github.com/vkbo/novelWriter/actions)
-[![Windows (3.9)](https://github.com/vkbo/novelWriter/workflows/Windows%20(3.9)/badge.svg?branch=main)](https://github.com/vkbo/novelWriter/actions)
-[![macOS (3.9)](https://github.com/vkbo/novelWriter/workflows/macOS%20(3.9)/badge.svg?branch=main)](https://github.com/vkbo/novelWriter/actions)
+[![Linux](https://github.com/vkbo/novelWriter/actions/workflows/test_linux.yml/badge.svg?branch=main)](https://github.com/vkbo/novelWriter/actions/workflows/test_linux.yml)
+[![Windows](https://github.com/vkbo/novelWriter/actions/workflows/test_win.yml/badge.svg?branch=main)](https://github.com/vkbo/novelWriter/actions/workflows/test_win.yml)
+[![macOS](https://github.com/vkbo/novelWriter/actions/workflows/test_mac.yml/badge.svg?branch=main)](https://github.com/vkbo/novelWriter/actions/workflows/test_mac.yml)
 [![flake8](https://github.com/vkbo/novelWriter/workflows/flake8/badge.svg)](https://github.com/vkbo/novelWriter/actions)
 [![codecov](https://codecov.io/gh/vkbo/novelWriter/branch/main/graph/badge.svg)](https://codecov.io/gh/vkbo/novelWriter)
-[![docs](https://readthedocs.org/projects/novelwriter/badge/?version=latest)](https://novelwriter.readthedocs.io/en/latest/?badge=latest)
+[![docs](https://readthedocs.org/projects/novelwriter/badge/?version=latest)](https://novelwriter.readthedocs.io/en/latest/?badge=latest)  
 [![release](https://img.shields.io/github/v/release/vkbo/novelwriter)](https://github.com/vkbo/novelWriter/releases)
 [![pypi](https://img.shields.io/pypi/v/novelwriter)](https://pypi.org/project/novelWriter)
 [![python](https://img.shields.io/pypi/pyversions/novelwriter)](https://pypi.org/project/novelWriter)
+[![Crowdin](https://badges.crowdin.net/novelwriter/localized.svg)](https://crowdin.com/project/novelwriter)
 
-<img align="left" style="margin: 0 16px 4px 0;" src="https://raw.githubusercontent.com/vkbo/novelWriter/main/setup/icons/scaled/icon-novelwriter-96.png">
+<img align="left" style="margin: 0 16px 4px 0;" src="https://raw.githubusercontent.com/vkbo/novelWriter/main/setup/novelwriter.png">
 
-novelWriter is a Markdown-like text editor designed for writing novels assembled from many smaller
-text documents. It uses a minimal formatting syntax inspired by Markdown, and adds a meta data
-syntax for comments, synopsis, and cross-referencing between files. It's designed to be a simple
-text editor that allows for easy organisation of text files and notes, built on plain text files
-for robustness.
+novelWriter is a plain text editor designed for writing novels assembled from many smaller text
+documents. It uses a minimal formatting syntax inspired by Markdown, and adds a meta data syntax
+for comments, synopsis, and cross-referencing. It's designed to be a simple text editor that allows
+for easy organisation of text and notes, using human readable text files as storage for robustness.
 
-The plain text files are suitable for version control software, and also well suited for file
-synchronisation tools. The core project structure is stored in a single project XML file. Other
-meta data is primarily saved in JSON files.
+The project storage is suitable for version control software, and also well suited for file
+synchronisation tools. All text is saved as plain text files with a meta data header. The core
+project structure is stored in a single project XML file. Other meta data is primarily saved as
+JSON files.
 
 The full documentation is available at
 [novelwriter.readthedocs.io](https://novelwriter.readthedocs.io).
 
+The full credits are listed in
+[CREDITS.md](https://github.com/vkbo/novelWriter/blob/main/CREDITS.md).
+
+You can also follow novelWriter on Mastodon at [fosstodon.org/@novelwriter](https://fosstodon.org/@novelwriter).
+
 ## Implementation
 
-The application is written in Python 3 using Qt5 via PyQt5. It is developed on Linux, but it should
-in principle work fine on other operating systems as well, as long as dependencies are met. The
-unit tests are run on the latest versions of Ubuntu Linux, Windows Server and macOS.
+The application is written with Python 3 (3.7+) using Qt5 and PyQt5 (5.10+). It is developed on
+Linux, but should in principle work fine on other operating systems as well as long as dependencies
+are met. It is regularly tested on Debian and Ubuntu Linux, Windows, and macOS.
+
+## Installation
+
+### Linux Mint, Ubuntu and Debian
+
+The Releases page has a `.deb` package that should install on Mint, Ubuntu and Debian.
+
+You can also use the novelWriter [PPA](https://launchpad.net/~vkbo/+archive/ubuntu/novelwriter).
+For more details, check the [Getting Started](https://novelwriter.readthedocs.io/en/latest/int_started.html)
+section in the documentation.
+
+### Windows 10+
+
+The Release page has a `setup.exe` file for Windows 10, that should also work on other Windows
+versions. The installer includes Python 3.10 and the library dependencies.
+
+### Other Install Options
+
+You can also download and install one of the minimal zip files from the
+[Releases](https://github.com/vkbo/novelWriter/releases) page or the
+[novelwriter.io](https://novelwriter.io/) website.
+The [Getting Started](https://novelwriter.readthedocs.io/en/latest/int_started.html) section of the
+documentation has detailed install instructions for these packages, and for installation via the
+Python Package Index.
 
 ## Project Contributions
 
-Contributions to this project are welcome. However, please read the
-[Contributing Guide](https://github.com/vkbo/novelWriter/blob/main/CONTRIBUTING.md) before
-submitting larger additions or changes to this project.
+Please don't make feature pull requests without first having discussed them with the maintainer.
+You can make a feature request in the issue tracker, or if the idea isn't fully formed, start a
+discussion on the discussion page. Please also don't make pull requests to reformat or rewrite
+existing code unless there is a very good reason for doing so.
 
-# Key Features
+Fixes and patches are welcome. Contributions related to packaging and installing novelWriter will
+also be appreciated, but please make an issue or a discussion topic first. Before contributing any
+code, please also read the full
+[Contributing Guide](https://github.com/vkbo/novelWriter/blob/main/CONTRIBUTING.md).
 
-Some features of novelWriter are listed below. Consult the
-[documentation](https://novelwriter.readthedocs.io) for more information.
+### Translations
 
-### Markdown Flavour
+New translations are always welcome. This project uses Crowdin to maintain translations, and you
+can contribute translations at the [Crowdin project page](https://crowdin.com/project/novelwriter).
+If you have any questions, feel free to post them to the
+[Translations of novelWriter](https://github.com/vkbo/novelWriter/issues/93) issue thread.
 
-novelWriter is _not_ a full-feature Markdown editor. It is a plain text editor that uses
-Markdown-like syntax to allow for a minimal set of formatting that is useful for the specific task
-of writing novels. The formatting is currently limited to:
+For more details, and how to use Qt Linguist for translations, see the
+[i18n instructions](https://github.com/vkbo/novelWriter/blob/main/i18n/README.md).
 
-* Headings levels 1 to 4 using the `#` syntax only.
-* Emphasised and strongly emphasised text. These are rendered as italicised and bold text.
-* Strikethrough text.
-* Hard line breaks using two or more spaces at the end of a line.
+## Key Features
 
-That is it. Features not supported in the editor are also not exported when using the export tool.
+Some key features of novelWriter are listed below. The
+[documentation](https://novelwriter.readthedocs.io) has a lot more information.
 
-In addition, novelWriter adds the following, which is otherwise not supported by Markdown:
+### Formatting Codes
 
-* A line starting with `%` is treated as a comment and not rendered on exports unless requested.
-  Comments do not count towards the word count.
-* If the first word of the comment is `synopsis:`, the comment is indexed and treated as the
-  synopsis for the section of text under the same header. These synopsis comments can be used to
-  build an outline and exported to external documents.
-* A set of meta data keyword/values starting with the character `@`. This is used for tagging
-  and inter-linking documents, and can also be included when generate a project outline.
-* A variety of thin and non-breaking spaces are supported. Some of them depend on the system
-  running at least Qt 5.9. Earlier versions of Qt will unfortunately strip them out when saving.
-* Tabs can be used in the text, and should be properly aligned in both editor and viewer. This can
-  be used to make simple tables and lists. Full Markdown tables and lists are not supported. Note
-  that for HTML exports, most browsers will treat a tab as a space, so it may not show up like
-  expected. Open Document exports should produce the expected result.
+Although novelWriter is a plain text editor, it uses a Markdown-like syntax to allow for a minimal
+set of formatting that is useful for the specific task of writing novels.
+
+| Code       | Usage    | Description |
+|------------|----------|-------------|
+| `#`        | Prefix   | Headings level 1 to 4. |
+| `_`        | Wrapped  | Emphasised (italicised) text. |
+| `**`       | Wrapped  | Strongly emphasised (bold) text. |
+| `~~`       | Wrapped  | Strikethrough text. |
+| `%`        | Prefix   | A comment; does not count towards the word count.<sup>1</sup> |
+| `@`        | Prefix   | The following text is parsed as a keyword/value command for meta data. |
+| `>`        | Prefix   | The paragraph is indented one tab width from the left. |
+| `<`        | Suffix   | The paragraph is indented one tab width from the right. |
+| `>>`       | Prefix   | The paragraph is right-aligned. |
+| `<<`       | Suffix   | The paragraph is left-aligned. |
+| `>>`, `<<` | Wrapped  | The paragraph is centred. |
+
+<sup>1</sup> If the first word of the comment is `synopsis:`, the comment is indexed and treated as
+the synopsis for the section of text where it occurs. These synopsis comments can be used to build
+an outline and exported to external documents.
+
+### Export Formats
 
 The core export formats of novelWriter are Open Document and HTML5. Open Document is an open
 standard for office type documents that is supported by most office applications. See
 [Open Document > Application Support](https://en.wikipedia.org/wiki/OpenDocument#Application_support)
 for more details.
 
-You can also export the entire project as a single novelWriter Markdown-flavour document. These can
-later be imported again into novelWriter. In addition, printing and export to PDF is offered
-through the Qt library, although with limitations to formatting.
+You can also export the entire project as a single novelWriter-markup document. These can later be
+imported again into novelWriter. In addition, printing and export to PDF is offered through the Qt
+library, although with limitations to formatting.
 
 ### Colour Themes
 
@@ -92,146 +131,61 @@ syntax highlighting themes. Optional GUI themes are also available, including da
 
 The structure of the project is shown on the left hand side of the main window. Project files are
 organised into root folders, indicating what class of file they are. The most important root folder
-is the `Novel` folder, which contains all of the files that make up the finished novel. Each root
+is the `Novel` folder, which contains all of the files that make up the novel itself. Each root
 folder can have subfolders. Subfolders have no impact on the final project structure, they are
 there for you to organise your files in whatever way you want.
 
-The editor supports four levels of headings, which determines what level the following text belongs
+The editor supports four levels of headings, which determine what level the following text belongs
 to. Headings of level one signify a book or partition title. Headings of level two signify the
 start of a new chapter. Headings of level three signify the start of a new scene. Headings of level
-four can be used internally in each scene to separate sections.
+four can be used internally in each scene to create separate sections.
 
-Each novel file can be assigned a layout format, which shows up as a flag next to the item in the
-project tree. These are mostly to help the user track what they contain, but they also have some
-impact on the format of the exported document. See the
-[documentation](https://novelwriter.readthedocs.io) for further details.
+See the [documentation](https://novelwriter.readthedocs.io) for further details.
 
 ### Project Notes
 
-Supporting note files can be added for the story plot, characters, locations, story timeline, etc.
-These have their separate root folders. These are optional files.
+Supporting notes can be added for the story plot, characters, locations, story timeline, etc. These
+have their separate root folders and are optional to use.
 
 ### Visualisation of Story Elements
 
-The different notes can be assigned tags, which other files can refer back to using the `@` meta
-keywords. This information can be used to display an outline of the story, showing where each scene
-connects to the plot, and which characters, etc. occur in them. In addition, the tags themselves
-are clickable in the document view pane, and control-clickable in the editor. They make it possible
-to quickly navigate between the documents while editing.
+The different notes can be assigned tags, which other files can refer back to using `@`-prefixed
+meta keywords. This information can be used to display an outline of the story, showing where each
+scene connects to the plot, and which characters, etc. occur in them. In addition, the tags
+themselves are clickable in the document view pane, and control-clickable in the editor. They make
+it possible to quickly navigate between the documents while writing.
 
-# Installing and Running
-
-For install instructions, please check the
-[Getting Started](https://novelwriter.readthedocs.io/en/latest/int_started.html) section in
-the [documentation](https://novelwriter.readthedocs.io/).
-
-## TLDR Instructions
+## Installing or Running from Source
 
 If you want to run novelWriter directly from the source code, you must run the `novelWriter.py`
-file from command line. For installations on Linux, macOS or Windows, see below.
+file from command line.
 
-**Note:** You may need to replace `python` with `python3` and `pip` with `pip3` in the instructions
-below on some systems. You may also want to add the `--user` flag for `pip` to install in your user
-space only.
-
-### Install from PyPi
-
-novelWriter is available on [pypi.org](https://pypi.org/project/novelWriter/), and can be installed
-with:
-```bash
-pip install novelwriter
-```
-Dependencies should be installed automatically, but can also be installed directly with:
-```bash
-pip install pyqt5 lxml pyenchant
-```
-When installing via pip, novelWriter can be launched from command line with:
-```bash
-novelWriter
-```
-
-Make sure the install location for pip is in your PATH variable. This is not always the case by
-default.
-
-### Setup on Linux
-
-If you're installing from source, the following commands will set up novelWriter on Linux:
+Dependencies can generally be installed from PyPi with:
 ```bash
 pip install -r requirements.txt
-python setup.py install
-python setup.py xdg-install
 ```
 
-This should make novelWriter available as a regular application on your system, with a launceher
-icon, and file association with novelWriter project files.
+On Linux, the dependencies are generally available in the standard package repository.
 
-**Note:** If you don't want to install the dependencies from pip and instead use your distro's own
-packages, you must manually install `python3-pyqt5`, `python3-lxml` and `python3-enchant`
-(Debian/Ubuntu), or the corresponding packages for your distro.
-
-### Setup on macOS
-
-If you're installing from source, the following commands will set up novelWriter on macOS:
-```bash
-brew install enchant
-pip3 install --user -r requirements.txt
-pip3 install --user pyobjc
-python3 setup.py install
-```
-
-At present, novelWriter isn't further integrated into the OS, so you must launch it from command
-line with:
-```bash
-novelWriter
-```
-
-If you want to help improve the setup process on macOS, it would be much appreciated.
-
-### Setup on Windows
-
-For Windows, first ensure that you have Python installed. If not, get it from
-[python.org/downloads](https://www.python.org/downloads/). Remember to select "Add Python to PATH"
-during the installation, otherwise novelWriter will not start.
-
-Then, download the `novelWriter-x.y.z-minimal-win.zip` file, where `x.y.z` is the version number,
-from the [releases](https://github.com/vkbo/novelWriter/releases) page. You can extract it to
-wherever you want to keep novelWriter on your PC, and run the `setup_windows.bat` file in it
-(double-clicking it should work). This will install the necessary dependencies from
-[pypi.org](https://pypi.org/) and create desktop and start menu icons.
+For more details on running or installing from source, see
+[Other Setup Methods](https://novelwriter.readthedocs.io/en/latest/setup_other.html).
 
 ## Debugging
 
-If you need to debug novelWriter, you must run it from command line. It takes a few parameters,
+If you need to debug novelWriter, you must run it from the command line. It takes a few parameters,
 which can be listed with the switch `--help`. The `--info`, `--debug` or `--verbose` flags are
 particularly useful for increasing logging output for debugging.
 
-# Licenses
+## Licence
 
-This is Open Source software, and novelWriter is licensed under GPLv3. See the
+This is Open Source software, and novelWriter is licenced under GPLv3. See the
 [GNU General Public License website](https://www.gnu.org/licenses/gpl-3.0.en.html) for more
 details, or consult the [LICENSE](https://github.com/vkbo/novelWriter/blob/main/LICENSE.md) file.
 
-Bundled assets have the following licenses:
+Bundled assets and their licences are listed in
+[CREDITS](https://github.com/vkbo/novelWriter/blob/main/CREDITS.md).
 
-* The Typicons-based icon themes by Stephen Hutchings are licensed under
-  [CC BY-SA 4.0](http://creativecommons.org/licenses/by-sa/4.0/). The icons have been altered in
-  size and colour for use with novelWriter, and some additional icons added. The original icon set
-  is available at
-  [stephenhutchings/typicons.font](https://github.com/stephenhutchings/typicons.font).
-* The Cantarell font by Dave Crossland is licensed under
-  [OPEN FONT LICENSE Version 1.1](http://scripts.sil.org/OFL).
-  It is available at [Google Fonts](https://fonts.google.com/specimen/Cantarell).
-* The Tomorrow syntax themes use colour schemes taken from Chris Kempson's collection of code
-  editor themes, licensed with the
-  [MIT License](https://github.com/chriskempson/tomorrow-theme/blob/master/LICENSE.md),
-  and the main repo is available at
-  [chriskempson/tomorrow-theme](https://github.com/chriskempson/tomorrow-theme).
-* Likewise, the Owl syntax themes use colours from Sarah Drasner's code editor themes, licensed
-  with the [MIT License](https://github.com/sdras/night-owl-vscode-theme/blob/master/LICENSE), and
-  the main repo is available at
-  [sdras/night-owl-vscode-theme](https://github.com/sdras/night-owl-vscode-theme).
-
-# Screenshot
+## Screenshots
 
 **novelWriter with default system theme:**
 ![Screenshot 1](https://raw.githubusercontent.com/vkbo/novelWriter/main/docs/source/images/screenshot_default.png)

docs/source/_static/css/custom.css

@@ -1,27 +0,0 @@
-/*
- * Custom CSS Rules for Sphinx RTD Theme
- */
-
-.kbd {
-    background-color: #eeeeee;
-    border: 1px solid #b4b4b4;
-    border-radius: 3px;
-    color: #333333;
-    display: inline-block;
-    font-size: 0.85em;
-    font-weight: 400;
-    line-height: 1;
-    padding: 2px 4px;
-    margin-left: 1px;
-    margin-right: 1px;
-    white-space: nowrap;
-}
-
-.tight-table td {
-    white-space: normal !important;
-    vertical-align: text-top;
-}
-
-pre span.go {
-    color: #333333 !important;
-}

docs/source/conf.py

@@ -1,117 +1,88 @@
-# -*- coding: utf-8 -*-
 #
 # Configuration file for the Sphinx documentation builder.
 #
 # This file does only contain a selection of the most common options. For a
 # full list see the documentation:
 # http://www.sphinx-doc.org/en/master/config
-
-# -- Path setup --------------------------------------------------------------
-
-# If extensions (or modules to document with autodoc) are in another directory,
-# add these directories to sys.path here. If the directory is relative to the
-# documentation root, use os.path.abspath to make it absolute, like shown here.
 #
-# import sys
-# sys.path.insert(0, os.path.abspath("."))
+
+# -- Imports -----------------------------------------------------------------
+
 import os
 import time
-import sphinx_rtd_theme # noqa: F401
+import datetime
 
-# -- Project information -----------------------------------------------------
+# -- Project Information -----------------------------------------------------
 
 project = "novelWriter"
-copyright = "2018–2021, Veronica Berglyd Olsen"
+copyright = f"{datetime.date.today().year}, Veronica Berglyd Olsen"
 author = "Veronica Berglyd Olsen"
 
-# The short X.Y version
-version = "1.2"
-# The full version, including alpha/beta/rc tags
-release = "1.2"
+initFile = os.path.join(
+    os.path.dirname(__file__), os.pardir, os.pardir,
+    "novelwriter", "__init__.py"
+)
+with open(initFile) as inFile:
+    for aLine in inFile:
+        if aLine.startswith("__version__"):
+            release = aLine.split('"')[1].strip()
+            break
+    else:
+        release = "unknown"
 
+version = release.split("-")[0]
 
-# -- General configuration ---------------------------------------------------
+# -- General Configuration ---------------------------------------------------
 
 os.environ["TZ"] = "Europe/Oslo"
 time.tzset()
 
-# needs_sphinx = "1.0"
-extensions = [
-    "sphinx_rtd_theme",
-]
+needs_sphinx = "4.0"
 templates_path = ["_templates"]
 source_suffix = ".rst"
 master_doc = "index"
 today_fmt = "%A, %d %B %Y at %H:%M"
-language = None
+language = "en"
 exclude_patterns = []
-pygments_style = None
+pygments_style = "sphinx"
+pygments_dark_style = "monokai"
 
+# -- Options for HTML Output -------------------------------------------------
 
-# -- Options for HTML output -------------------------------------------------
-
-html_theme = "sphinx_rtd_theme"
-html_logo = "images/novelwriter.png"
-html_theme_options = {
-    # Toc options
-    "collapse_navigation": True,
-    "sticky_navigation": True,
-    "navigation_depth": 3,
-    "includehidden": True,
-    "titles_only": False,
-    "logo_only": True,
-}
-
+html_theme = "furo"
 html_static_path = ["_static"]
-html_css_files = [
-    "css/custom.css",
-]
+html_theme_options = {
+    "light_logo": "novelwriter-light.png",
+    "dark_logo": "novelwriter-dark.png",
+}
+html_title = f"<div style='text-align: center'>Documentation Version {release}</div>"
 
-# Custom sidebar templates, must be a dictionary that maps document names
-# to template names.
-# The default sidebars (for documents that don"t match any pattern) are
-# defined by theme itself.  Builtin themes are using these templates by
-# default: ``["localtoc.html", "relations.html", "sourcelink.html",
-# "searchbox.html"]``.
-# html_sidebars = {}
-
-
-# -- Options for HTMLHelp output ---------------------------------------------
+# -- Options for HTMLHelp Output ---------------------------------------------
 
 # Output file base name for HTML help builder.
 htmlhelp_basename = "novelWriterDoc"
 
-
-# -- Options for LaTeX output ------------------------------------------------
+# -- Options for LaTeX Output ------------------------------------------------
 
 latex_elements = {
-    # The paper size ("letterpaper" or "a4paper").
-    #
-    # "papersize": "letterpaper",
-
-    # The font size ("10pt", "11pt" or "12pt").
-    #
-    # "pointsize": "10pt",
-
-    # Additional stuff for the LaTeX preamble.
-    #
-    # "preamble": "",
-
-    # Latex figure (float) alignment
-    #
-    # "figure_align": "htbp",
+    "papersize": "a4paper",
+    "pointsize": "11pt",
+    "preamble": (
+        "\\usepackage[utf8]{inputenc}\n"
+        "\\DeclareUnicodeCharacter{2212}{\\textendash}\n"
+    ),
+    "figure_align": "htbp",
 }
 
 # Grouping the document tree into LaTeX files. List of tuples
 # (source start file, target name, title,
 #  author, documentclass [howto, manual, or own class]).
 latex_documents = [(
-    master_doc, "novelWriter.tex", "novelWriter Documentation",
+    master_doc, "manual.tex", "novelWriter Documentation",
     author, "manual"
 )]
 
-
-# -- Options for manual page output ------------------------------------------
+# -- Options for Man Page Output ---------------------------------------------
 
 # One entry per manual page. List of tuples
 # (source start file, name, description, authors, manual section).
@@ -119,8 +90,7 @@ man_pages = [(
     master_doc, "novelwriter", "novelWriter Documentation", [author], 1
 )]
 
-
-# -- Options for Texinfo output ----------------------------------------------
+# -- Options for Texinfo Output ----------------------------------------------
 
 # Grouping the document tree into Texinfo files. List of tuples
 # (source start file, target name, title, author,
@@ -130,8 +100,7 @@ texinfo_documents = [(
     "novelWriter", "Markdown-like editor for novels.", "Miscellaneous"
 )]
 
-
-# -- Options for Epub output -------------------------------------------------
+# -- Options for EPub Output -------------------------------------------------
 
 # Bibliographic Dublin Core info.
 epub_title = project

docs/source/index.rst

@@ -1,93 +1,90 @@
-#####################
-novelWriter |release|
-#####################
+#############################
+Documentation for novelWriter
+#############################
 
-.. image:: https://github.com/vkbo/novelWriter/workflows/python%203.8/badge.svg?branch=main
-   :target: https://github.com/vkbo/novelWriter/actions
-   :alt: Python Tests
+.. image:: images/novelwriter_logo.png
+   :align: right
+   :width: 48
 
-.. image:: https://codecov.io/gh/vkbo/novelWriter/branch/main/graph/badge.svg
-   :target: https://codecov.io/gh/vkbo/novelWriter
-   :alt: Code Coverage
+| **For Release:** |release|
+| **Last Updated:** |today|
+|
 
-.. image:: https://readthedocs.org/projects/novelwriter/badge/?version=latest
-   :target: https://novelwriter.readthedocs.io/en/latest/?badge=latest
-   :alt: Documentation
+novelWriter is an open source plain text editor designed for writing novels assembled from many
+smaller text documents. It uses a minimal formatting syntax inspired by Markdown, and adds a meta
+data syntax for comments, synopsis, and cross-referencing. It is designed to be a simple text
+editor that allows for easy organisation of text and notes, using human readable text files as
+storage for robustness.
 
-.. image:: https://img.shields.io/github/v/release/vkbo/novelwriter
-   :target: https://github.com/vkbo/novelWriter/releases
-   :alt: GitHub Release
+.. figure:: images/screenshot_multi.png
+   :align: center
+   :width: 500
 
-.. image:: https://img.shields.io/pypi/v/novelwriter
-   :target: https://pypi.org/project/novelWriter/
-   :alt: PyPI
-
-.. image:: https://img.shields.io/pypi/pyversions/novelwriter
-   :target: https://pypi.org/project/novelWriter/
-   :alt: Python Version
-
-**Last Updated:** |today|
-
-novelWriter is a markdown-like text editor designed for writing novels and larger projects of many
-smaller plain text documents. It uses its own flavour of markdown that supports a meta data syntax
-for comments, synopsis and cross-referencing between documents. The idea is to have a simple text
-editor which allows for easy organisation of text documents and notes, built on a plain text file
-project repository for robustness.
-
-The plain text storage is suitable for version control software, and also well suited for file
-synchronisation tools. The core project structure is stored in a single project XML file. Other
-meta data is primarily saved as JSON files.
+The project storage is suitable for version control software, and also well suited for file
+synchronisation tools. All text is saved as plain text files with a meta data header. The core
+project structure is stored in a single project XML file. Other meta data is primarily saved as
+JSON files. See the :ref:`a_breakdown_storage` section for more details.
 
 Any operating system that can run Python 3 and has the Qt 5 libraries should be able to run
 novelWriter. It runs fine on Linux, Windows and macOS, and users have tested it on other platforms
-too. novelWriter can be run directly from the Python source, or installed from the pip tool or via
-the provided setup script. See :ref:`a_started`, or one or the setup instructions for your
-operating system for further details.
+as well. novelWriter can also be run directly from the Python source, or installed from packages or
+the pip tool. See :ref:`a_started` for more details.
+
+.. note::
+   Version 1.5 introduced a few changes that will require you to make some minor modifications to
+   some of the headings in your project. It should be fairly quick and straightforward. Please see
+   the :ref:`a_prjfmt_1_3` section for more details.
 
 **Useful Links**
 
 * Website: https://novelwriter.io
 * Documentation: https://novelwriter.readthedocs.io
+* Internationalisation: https://crowdin.com/project/novelwriter
 * Source Code: https://github.com/vkbo/novelWriter
 * Source Releases: https://github.com/vkbo/novelWriter/releases
 * Issue Tracker: https://github.com/vkbo/novelWriter/issues
 * Feature Discussions: https://github.com/vkbo/novelWriter/discussions
 * PyPi Project: https://pypi.org/project/novelWriter
-
+* Social Media: https://fosstodon.org/@novelwriter
 
 .. toctree::
-   :maxdepth: 2
+   :maxdepth: 1
    :caption: Introduction
+   :hidden:
 
    int_introduction
+   int_overview
    int_started
-   setup_linux
-   setup_mac
-   setup_windows
-
+   int_source
+   int_customise
 
 .. toctree::
-   :maxdepth: 2
-   :caption: Usage
+   :maxdepth: 1
+   :caption: Using novelWriter
+   :hidden:
 
+   usage_breakdown
    usage_interface
-   usage_projects
-   usage_structure
-   usage_notes
-   usage_export
+   usage_format
+   usage_shortcuts
    usage_typography
-
+   usage_projectformat
 
 .. toctree::
-   :maxdepth: 2
+   :maxdepth: 1
+   :caption: Organising Your Project
+   :hidden:
+
+   project_overview
+   project_structure
+   project_notes
+   project_export
+
+.. toctree::
+   :maxdepth: 1
    :caption: Under the Hood
+   :hidden:
 
-   tech_technical
-
-
-Indices and Tables
-==================
-
-* :ref:`genindex`
-* :ref:`modindex`
-* :ref:`search`
+   tech_locations
+   tech_storage
+   tech_tests

docs/source/int_customise.rst

@@ -0,0 +1,157 @@
+.. _a_custom:
+
+**************
+Customisations
+**************
+
+.. _Enchant: https://abiword.github.io/enchant
+.. _Free Desktop: https://cgit.freedesktop.org/libreoffice/dictionaries/tree/
+
+There are a few ways you can customise novelWriter youself. Currently, you can add new GUI themes,
+your own syntax themes, and install additional dictionaries.
+
+
+.. _a_custom_dict:
+
+Spell Check Dictionaries
+========================
+
+novelWriter uses Enchant_ as the spell checking tool. Depending on you operating system, it may or
+may not load installed spell check dictionaries.
+
+Linux
+   On Linux, you generally only have to install hunspell or aspell dictionaries on your system like
+   you do for other applications. See your distro's documentation for how to do this. These
+   dictionaries should then show up as available spell check languages in novelWriter.
+
+Windows
+   For Windows, English is included with the installation. For other languages you have to download
+   and add dictionaries yourself. You can find the various dictionaries on the `Free Desktop`_
+   website. You should find a folder for your language, if it is available at all, and download the
+   files ending with ``.aff`` and ``.dic``. These files must then be copied to the following
+   location:
+
+   ``C:\Users\<USER>\AppData\Local\enchant\hunspell``
+
+   This assumes your user profile is stored at ``C:\Users\<USER>``. The last one or two folders may
+   not exist, so you may need to create them.
+
+
+.. _a_custom_theme:
+
+Syntax and GUI Themes
+=====================
+
+Adding your own GUI and syntax themes is relatively easy. The themes are defined by simple plain
+text config files with meta data and colour settings.
+
+In order to make your own versions, first copy one of the existing files to your local computer and
+modify it as you like.
+
+* The existing syntax themes are stored in
+  `novelwriter/assets/syntax <https://github.com/vkbo/novelWriter/tree/main/novelwriter/assets/syntax>`_.
+* The existing GUI themes are stored in
+  `novelwriter/assets/themes <https://github.com/vkbo/novelWriter/tree/main/novelwriter/assets/themes>`_.
+
+Remember to also change the name of your theme by modifying the ``name`` setting at the top of the
+file, otherwise you may not be able to distinguish them in :guilabel:`Preferences`.
+
+For novelWriter to be able to locate the custom theme files, you must copy them to the
+:ref:`a_locations_data` location in your home or user area. There should be a folder there named
+``syntax`` for syntax themes and just ``themes`` for GUI themes. These folders are created the
+first time you start novelWriter.
+
+Once the files are copied there, they should show up in :guilabel:`Preferences` with the label you
+set as ``name`` inside the file.
+
+.. note::
+   In novelWriter 2.0 the ``icontheme`` value was added to GUI themes. Make sure you set this value
+   in existing custom themes. Otherwise it defaults to ``typicons_light``, which may not match your
+   theme colour scheme.
+
+
+Gustom GUI Theme
+----------------
+
+A GUI theme conf file consists of the follwing settings:
+
+.. code-block:: cfg
+
+   [Main]
+   name        = My Custom Theme
+   description = A description of my custom theme
+   author      = Jane Doe
+   credit      = John Doe
+   url         = https://example.com
+   license     = CC BY-SA 4.0
+   licenseurl  = https://creativecommons.org/licenses/by-sa/4.0/
+   icontheme   = typicons_light
+
+   [Palette]
+   window          = 100, 100, 100
+   windowtext      = 100, 100, 100
+   base            = 100, 100, 100
+   alternatebase   = 100, 100, 100
+   text            = 100, 100, 100
+   tooltipbase     = 100, 100, 100
+   tooltiptext     = 100, 100, 100
+   button          = 100, 100, 100
+   buttontext      = 100, 100, 100
+   brighttext      = 100, 100, 100
+   highlight       = 100, 100, 100
+   highlightedtext = 100, 100, 100
+   link            = 100, 100, 100
+   linkvisited     = 100, 100, 100
+
+   [GUI]
+   statusnone      = 100, 100, 100
+   statussaved     = 100, 100, 100
+   statusunsaved   = 100, 100, 100
+
+In the Main section you must at least define the ``name`` and ``icontheme`` settings. The
+``icontheme`` settings should correspond to one of the internal icon themes. Either
+``typicons_light`` or ``typicons_dark``.
+
+The Palette values correspond the the Qt enum values for QPalette::ColorRole, see the
+`Qt documentation <https://doc.qt.io/qt-5.15/qpalette.html#ColorRole-enum>`_ for more details. The
+colour values are RGB numbers on the format ``r, g, b`` where each is an integer from  to 255.
+Omitted values are not loaded and will use default values.
+
+
+Custom Syntax Theme
+-------------------
+
+A syntax theme conf file consists of the follwing settings:
+
+.. code-block:: cfg
+
+   [Main]
+   name       = My Syntax Theme
+   author     = Jane Doe
+   credit     = John Doe
+   url        = https://example.com
+   license    = CC BY-SA 4.0
+   licenseurl = https://creativecommons.org/licenses/by-sa/4.0/
+
+   [Syntax]
+   background     = 255, 255, 255
+   text           =   0,   0,   0
+   link           =   0,   0,   0
+   headertext     =   0,   0,   0
+   headertag      =   0,   0,   0
+   emphasis       =   0,   0,   0
+   straightquotes =   0,   0,   0
+   doublequotes   =   0,   0,   0
+   singlequotes   =   0,   0,   0
+   hidden         =   0,   0,   0
+   keyword        =   0,   0,   0
+   value          =   0,   0,   0
+   spellcheckline =   0,   0,   0
+   errorline      =   0,   0,   0
+   replacetag     =   0,   0,   0
+   modifier       =   0,   0,   0
+
+
+In the Main section, you must define at least the ``name`` setting. The Syntax colour values are
+RGB numbers on the format ``r, g, b`` where each is an integer from  to 255. Omitted values are set
+to black, except ``background`` which defaults to white,

docs/source/int_introduction.rst

@@ -1,118 +1,66 @@
 .. _a_intro:
 
 ************
-Introduction
+Key Features
 ************
 
-novelWriter is a simple, multi-document plain text editor using a modified markdown syntax to apply
-simple formatting to the text. It is designed for writing novels, and allows for the component
-documents to be ordered freely to create the desired structure of the novel. More details about how
-projects are structured is covered in :ref:`a_struct`.
+.. _Snowflake : https://www.advancedfictionwriting.com/articles/snowflake-method/
 
-In addition, the project can contain notes on the various plot elements, characters, locations,
-etc, that make up the story. These notes are organised in a set of category-specific top-level
-folders referred to as "root" folders, and each entry can be tagged and cross-referenced from
-within the novel documents and notes. These tags make it possible to inter-link documents, and
-generate an overview of the entire novel project and how the various documents and plot elements
-are interconnected. The tag and reference syntax is covered in :ref:`a_proj` and :ref:`a_notes`.
+At the core, novelWriter is a multi-document plain text editor. It uses a markup syntax inspired by
+Markdown to apply simple formatting to the text. It is designed for writing fiction, so the
+formatting features are limited to those relevant for this purpose. It is not suitable for
+technical writing.
 
-These additional features are not standard in markdown, but are available through special meta
-keywords described in :ref:`a_struct_tags`. Syntax highlighting is provided to make it easier to
-verify that the markdown tags are used correctly.
+Your novel project is organised as a collection of separate plain text documents instead of a
+single, large document. The idea here is to make it easier to reorganise your project structure
+without having to cut and paste text.
 
-An overview of the supported markdown syntax is covered in :ref:`a_ui`.
+You can at any point split documents by their header, or merge multiple documents into single
+documents. This makes it easier to use variations of the popular Snowflake_ method for writing.
 
+Below are some key features of novelWriter.
 
-.. _a_intro_design:
+**Focus on writing**
+   The aim of the user interface is to let the user focus on writing instead of spending time
+   formatting text. Formatting is therefore limited to a small set of formatting tags for simple
+   things like text emphasis and paragraph alignment. When you really want to focus on just
+   writing, you can switch the editor into :guilabel:`Focus Mode` where only the text editor window
+   itself is vissible.
 
-Design Philosophy
-=================
+**Keep an eye on your notes**
+   The main window can optionally show a document viewer to the right of the editor. This view
+   panel is intended for displaying another scene document, you character notes, plot notes, or any
+   other document you may need to reference while writing.
 
-The user interface of novelWriter is intended to be as minimalistic as practically possible, while
-at the same time provide a complete set of features needed for writing a novel.
+**Organise your documents how you like**
+   You can split your novel project up into as many individual documents as you want to. When you
+   build the project, they are all glued together in the top-to-bottom order in which they appear
+   in the project tree. You can use as few text documents as you like, but splitting the project up
+   into chapters and scenes means you can easily reorder them using the drag and drop feature. You
+   can start out with a few documents and then later split the document into multiple documents
+   based on its headers.
 
-.. note::
-   novelWriter is not intended to be a full office type word processor. It doesn't support images,
-   links, tables, and other complex structures and objects often needed for such documents.
-   Formatting is limited to headers, and bold, italicised and strikethrough text.
+**Keep track of your plot elements**
+   All notes in your project can be assigned a *tag* you can *reference* from any other document or
+   note. In fact, you can add a new tag under each heading of a note if you need to be able to
+   reference a specific section. Note tags are organised into categories with specific reference
+   keywords.
 
-.. tip::
-   If you do need to align information in rows and columns in your notes, you can achieve this with
-   tabs and hard line breaks. The tab stop width can be specified in :guilabel:`Preferences` and
-   hard line breaks can be inserted by adding to spaces at the end of the line.
+**Get an overview of your plot elements**
+   In the :guilabel:`Outline View` on the main window you can see an outline of all the chapters,
+   scenes, and sections of your project. If they have any references in them, these are listed in
+   additional columns. You can also add a synopsis to each document, which can be listed here as
+   well. You have the option to add or remove columns of information from this outline. A subset of
+   the outline information is also available in the :guilabel:`Novel View` as a replacement for the
+   main project tree.
 
-The main window does not have a toolbar like many other applications do. This reduces clutter, and
-since the documents are formatted with markdown tags, is more or less redundant. However, all
-formatting features supported are available through convenient keyboard shortcuts. They are also
-available in the main menu so you don't have to look up the syntax every time until you've
-memorised it. A full list of shortcuts can be found in the :ref:`a_ui_shortcuts` section.
-
-In addition, novelWriter has a :guilabel:`Focus Mode` where all the user interface elements other
-than the document editor itself are hidden away.
-
-The colour scheme of the user interface defaults to that of the host operating system. In addition,
-other light and dark themes are provided, and can be enabled in :guilabel:`Preferences` from the
-:guilabel:`Tools` menu. A number of syntax highlighting themes are also available in
-:guilabel:`Preferences`. A set of icon themes in colour and greyscale are also offered. The icons
-are based on the Typicons_ icon set designed by Stephen Hutchings.
-
-The main window is split in two, or optionally three, panels. The left-most panel contains the
-project tree and all the documents in your project. The second panel is the document editor, and
-the optional third panel is a document viewer which can view any document in your project
-independently of the document editor. It is not intended as a preview window, although you can use
-it for this, but for viewing your notes next to your editor while you're writing.
-
-A second tab is also available on the main window. This is the :guilabel:`Outline` tab where the
-entire novel structure can be displayed, with all the tags and references listed. Depending on how
-you structure your novel documents, this outline can be quite different from your project tree.
-Your project tree lists individual documents, your Outline tree lists the structure of the novel
-itself in terms of partitions, chapters and scenes as it appears in the text of the documents.
-
-.. _Typicons: https://github.com/stephenhutchings/typicons.font
-
-
-.. _a_intro_project:
-
-Project Layout
-==============
-
-You are free to organise your project documents as you wish into subfolders, and split the text
-between documents in whatever way suits you. All that matters to novelWriter is the linear order
-the documents appear at in the project tree (top to bottom). The chapters, scenes and sections of
-the novel are determined by the headings within those documents.
-
-The four heading levels (**H1** to **H4**) are treated as follows:
-
-* **H1** is used for the book title, and for partitions.
-* **H2** is used for chapter tiles.
-* **H3** is used for scene titles – optionally replaced by separators.
-* **H4** is for section titles within scenes, if such granularity is needed.
-
-This header level structure is only taken into account for novel documents. For the project notes,
-the header levels have no structural meaning, and the user is free to do whatever they want. See
-:ref:`a_struct` and :ref:`a_notes` for more details.
-
-
-.. _a_intro_export:
-
-Project Export
-==============
-
-The project can at any time be exported to a range of different formats through the
-:guilabel:`Build Novel Project` tool. Natively, novelWriter supports export to Open Document,
-HTML5, and various flavours of Markdown.
-
-The HTML5 export format is suitable for conversion by a number of other tools like Pandoc, or for
-importing into word processors if the Open Document format isn't suitable. In addition, printing
-and printing to PDF is also possible. 
-
-It is also possible to export the content of the project to a JSON file. This is useful if you want
-to write your own processing script in for instance Python as the entire novel can be read into a
-Python dictionary with a couple of lines of code.
-
-A number of filter options can be applied to the produced document, allowing you to export a draft
-manuscript, a reference document of notes, an outline based on chapter and scene titles with a
-synopsis each, and so on. See :ref:`a_export` for more details on export features and formats.
+**Building your manuscript**
+   Whether you want to compile a manuscript, or export all your notes, or generate an outline of
+   your chapters and scenes with a synopsis, you can use the :guilabel:`Build Novel Project` tool.
+   The tool lets you select what information you want to include in the generated document, and how
+   it is formatted. You can send the result to a printer, a PDF, or to an Open Document file that
+   can be opened by most office type word processors. You can also generate the result as HTML, or
+   Markdown, both suitable for further conversion to other formats.
 
 
 .. _a_intro_screenshots:
@@ -120,7 +68,7 @@ synopsis each, and so on. See :ref:`a_export` for more details on export feature
 Screenshots
 ===========
 
-**novelWriter with default system theme:**
+**novelWriter with default theme:**
 
 .. image:: images/screenshot_default.png
    :width: 800

docs/source/int_overview.rst

@@ -0,0 +1,92 @@
+.. _a_overview:
+
+********
+Overview
+********
+
+.. only:: html
+
+   .. image:: images/python_powered.png
+      :align: right
+      :width: 220
+
+novelWriter is built on `Python 3 <https://www.python.org/>`_, a cross platform programming
+language that doesn't require a compiler to build and run. That means that the code can run on your
+computer right out of the box, or from a zip file.
+
+While it is developed for Linux primarily, it runs just fine on Windows as well. It also works fine
+on macOS, but the author is not a mac user, so support for mac is dependant on user feedback and
+contributions.
+
+In order to run novelWriter, you also need a few additional packages. The user interface is built
+with `Qt 5 <https://www.qt.io/>`_, a cross platform library for building graphical user interface
+applications. It also uses a third party XML package. If you want spell checking, you also need the
+spell check package Enchant developed for AbiWord
+
+For install instructions, see :ref:`a_started`.
+
+For information on how to add spell check dictionaries, see :ref:`a_custom_dict`.
+
+
+Using novelWriter
+=================
+
+In order to use novelWriter effectively, you need to know the basics of how it works. The following
+sections will explain the main principles. It starts with the basics, and gets more detailed as you
+read on.
+
+:ref:`a_breakdown` – Essential Information
+   This section explains the basics of how the application works and what it can and cannot do.
+
+:ref:`a_ui` – Recommended Reading
+   This section will give you a more detailed explanation of what the various elements on the user
+   interface do and how you can use them more effectively.
+
+:ref:`a_fmt` – Essential Information
+   This section covers how you should format your text. The editor is plain text, so text
+   formatting requires some basic markup. The structure of your novel is also inferred by how you
+   use headings. Tags and references are implemented by simple codes.
+
+:ref:`a_kb` – Optional / Lookup
+   This section lists all the keyboard shortcuts in novelWriter and what they do. Most of the
+   shortcuts are also listed next to the menu items inside the app, or in tool tips, so this
+   section is mostly for reference.
+
+:ref:`a_typ` – Optional
+   This section gives you an overview of the special typographical symbols available in
+   novelWriter. The auto-replace feature can handle the insertion of standard quote symbols for
+   your language, and other special characters. If you use any symbols aside from these. their
+   intended use is explained here.
+
+:ref:`a_prjfmt` – Optional
+   This section is more technical and has an overview of changes made to the way your project data
+   is stored. The format has changed a bit from time to time, and sometimes the changes require
+   that you make small modifications to your project. Everything you need to know is listed in this
+   section.
+
+
+Organising Your Projects
+========================
+
+In addition to manage a collection of plain text files, novelWriter can interpret and map the
+structure of your novel and show you additional information about its flow and content. In order
+to take advantage of these features, you must structure your text in a specific way and add some
+meta data for it to extract.
+
+:ref:`a_proj` – Essential Information
+   This section explains how you organise the content of your project, and how to set up automated
+   backups of your work.
+
+:ref:`a_struct` – Essential Information
+   This section covers the way your novel's structure is encoded into the text documents. It
+   explains how the different levels of headings are used, and how you can include information
+   about characters, plot elements, and other meta data in your text.
+
+:ref:`a_notes` - Recommended Reading
+   This section briefly describes what novelWriter does with the note files you add to your
+   project. Generally, the application doesn't do much with them at all aside from looking through
+   them for tags you've set so that it knows which file to open when you click on a reference.
+
+:ref:`a_export` - Recommended Reading
+   This section explains in more detail how the build tool works. In particular how you can
+   control the way chapter titles are formatted, and how scene and section breaks are handled.

docs/source/int_source.rst

@@ -0,0 +1,155 @@
+.. _a_source:
+
+*******************
+Running from Source
+*******************
+
+.. _main website: https://novelwriter.io
+.. _GitHub: https://github.com/vkbo/novelWriter/releases
+.. _PyPi: https://pypi.org/project/novelWriter/
+.. _Sphinx Docs: https://www.sphinx-doc.org/
+
+This section describes various ways of running novelWriter directly from the source code, and how
+to build the various components like the translation files and documentation.
+
+.. note::
+   The text below assumes the command ``python`` corresponds to a Python 3 executable. Python 2 is
+   now deprecated, but many systems still have both Python 2 and 3. For such systems, the command
+   ``python3`` may be needed instead. Likewise, ``pip`` may need to be replaced with ``pip3``.
+
+
+.. _a_source_depend:
+
+Dependencies
+============
+
+novelWriter has been designed to rely on as few dependencies as possible. Aside from the packages
+needed to communicate with the Qt GUI libraries, only one package is required for handling the XML
+format of the main project file. Everything else is handled with standard Python libraries.
+
+The following Python packages are needed to run novelWriter:
+
+* ``PyQt5`` – needed for connecting with the Qt5 libraries.
+* ``lxml`` – needed for full XML support.
+* ``PyEnchant`` – needed for spell checking (optional).
+
+PyQt/Qt should be at least 5.10, but ideally 5.13 or higher for all features to work. For instance,
+searching using regular expressions with full Unicode support requires 5.13. There is no known
+minimum version requirement for package ``lxml``, but the code was originally written with 4.2,
+which is therefore set as the minimum. It may work on lower versions. You have to test it.
+
+If you want spell checking, you must install the ``PyEnchant`` package. The spell check library
+must be at least 3.0 to work with Windows. On Linux, 2.0 also works fine.
+
+If you install from PyPi, these dependencies should be installed automatically. If you install from
+source, dependencies can still be installed from PyPi with:
+
+.. code-block:: bash
+
+   pip install -r requirements.txt
+
+
+.. _a_source_install:
+
+Install from Source
+===================
+
+You can download the latest version of novelWriter from the source repository on GitHub_ and run
+the setup manually. It is equivalent to what the ``pip install`` command does, and it installs
+novelWriter to the default location for Python packages.
+
+This step requires that you have ``setuptools`` installed on your system. If you don't have it
+installed, it can usually be installed from your distro's repository. For Debian and Ubuntu this is
+achieved with:
+
+.. code-block:: bash
+
+   sudo apt install python3-setuptools
+
+The package is also available from PyPi:
+
+.. code-block:: bash
+
+   pip install --user setuptools
+
+With ``setuptools`` in place, novelWriter can be installed to the user space with:
+
+.. code-block:: bash
+
+   python setup.py install --user
+
+.. tip::
+
+   The main setup script has a number of options that may be useful to you. You can list them by
+   running ``python setup.py help``.
+
+
+.. _a_source_i18n:
+
+Building the Translation Files
+==============================
+
+If you installed novelWriter from a package, the translation files should be pre-built and
+included. If you're running novelWriter from the source code, you will need to generate the files
+yourself. The files you need will be written to the ``novelwriter/assets/i18n`` folder, and will
+have the ``.qm`` file extension.
+
+You can build the ``.qm`` files with:
+
+.. code-block:: bash
+
+   python setup.py qtlrelease
+
+This requires that the Qt Linguist tool is installed on your system. On Ubuntu and Debian, the
+needed package is called ``qttools5-dev-tools``.
+
+.. note::
+   If you want to improve novelWriter with translation files for another language, or update an
+   existing translation, instructions for how to contribute can be found in the ``README.md`` file
+   in the ``i18n`` folder of the source code.
+
+
+.. _a_source_sample:
+
+Building the Example Project
+============================
+
+In order to be able to create new projects from example files, you need a ``sample.zip`` file in
+the ``assets`` folder of the source. This file can be built from setup script by running:
+
+.. code-block:: bash
+
+   python setup.py sample
+
+
+.. _a_source_docs:
+
+Building the Documentation
+==========================
+
+A local copy of this documentation can be generated as HTML. This requires the following Python
+packages from PyPi:
+
+.. code-block:: bash
+
+   pip install furo sphinx
+
+The documentation can then be built from the root folder in the source code by running:
+
+.. code-block:: bash
+
+   make -C docs html
+
+If successful, the documentation should be available in the ``docs/build/html`` folder and you can
+open the ``index.html`` file in your browser.
+
+You can also build a PDF manual from the documentation using the setup script:
+
+.. code-block:: bash
+
+   python setup.py manual
+
+This will build the documentation as a PDF using LaTeX. The file will then be copied into the
+assets folder and made available in the :guilabel:`Help` menu in novelWriter. The Sphinx build
+system has a few extra dependencies when building the PDF. Please check the `Sphinx Docs`_ for more
+details.

docs/source/int_started.rst

@@ -4,141 +4,247 @@
 Getting Started
 ***************
 
+.. _brew docs: https://docs.brew.sh/Homebrew-and-Python
+.. _Enchant: https://abiword.github.io/enchant/
+.. _GitHub: https://github.com/vkbo/novelWriter
+.. _macOS: https://github.com/vkbo/novelWriter/issues/867
 .. _main website: https://novelwriter.io
-.. _GitHub: https://github.com/vkbo/novelWriter/releases
+.. _PPA: https://launchpad.net/~vkbo/+archive/ubuntu/novelwriter
+.. _Pre-Release PPA: https://launchpad.net/~vkbo/+archive/ubuntu/novelwriter-pre
 .. _PyPi: https://pypi.org/project/novelWriter/
+.. _python.org: https://www.python.org/downloads/windows
+.. _Releases: https://github.com/vkbo/novelWriter/releases
+.. _RPM: https://github.com/vkbo/novelWriter/issues/907
+.. _AppImage: https://appimage.org/
 
-This section contains brief guides to how you can get novelWriter running on your computer. These
-are the methods currently supported by the developer. Packages may also be available in other
-package managers, but those are not managed by the developer. No installers are provided at this
-time, but it is fairly straightforward to set up novelWriter with the provided install scripts.
+If you are using Windows or a Debian-based Linux distribtuion, you can install novelWriter from
+package installers. If you are on macOS, you have the option to run novelWriter from a standalone
+folder. See :ref:`a_started_minimal`. This option is also available for Windows and Linux. The
+third option is to install novelWriter from the Python Package Index. See :ref:`a_started_pip`.
 
-As novelWriter matures, more options for how to install it and get it running will be added. For
-non-Windows users the install process is at the present time best suited for people used to working
-with the command line. But even if you're not, the install process is fairly straightforward.
+Spell checking in novelWriter is provided by a third party library called Enchant_. Generally, it
+should pull dictionaries from your operating system automatically. However, on Windows they must be
+installed manually. See :ref:`a_custom_dict` for more details.
 
-The next pages have specific install instructions for the various operating systems novelWriter can
-run on. The instructions below are supplementary information, instructions for alterbative methods,
-and additional build options.
+.. admonition:: Help Wanted
+   :class: seealso
+
+   If you would like to help making more installers, the project is currently looking for people
+   who can help make releases for Red Hat-based Linux distros (RPM) and for macOS. See the issues
+   posted for RPM_ and macOS_ on GitHub_.
+
+
+.. _a_started_windows:
+
+Install on Windows
+==================
+
+You can install novelWriter with both Python and library dependencies embedded using the Windows
+Installer (setup.exe) file from the `main website`_, or from the Releases_ page on GitHub.
+Installing it should be straightforward.
+
+If you have any issues, try uninstalling the previous version and making a fresh install. If you
+already had a version installed via a different method, you should uninstall that first.
+
+
+.. _a_started_linux:
+
+Install on Linux
+================
+
+A Debian package can be downloaded from the `main website`_, or from the Releases_ page on GitHub.
+This package should work on both Debian, Ubuntu and Linux Mint, at least.
+
+If you prefer, you can also add the novelWriter repository on Launchpad to your package manager.
+
+
+Ubuntu
+------
+
+You can add the Ubuntu PPA_ and install novelWriter with the following commands.
+
+.. code-block:: bash
+
+   sudo add-apt-repository ppa:vkbo/novelwriter
+   sudo apt update
+   sudo apt install novelwriter
+
+If you want pre-releases, add the ``ppa:vkbo/novelwriter-pre`` repository instead.
+
+
+Debian and Mint
+---------------
+
+Since this is a pure Python package, the Launchpad PPA can in principle also be used on Debian or
+Mint. However, the above command will fail to add the signing key.
+
+Instead, run the following commands to add the repository and key:
+
+.. code-block:: bash
+
+   sudo gpg --no-default-keyring --keyring /usr/share/keyrings/novelwriter-ppa-keyring.gpg --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys F19F1FCE50043114
+   echo "deb [signed-by=/usr/share/keyrings/novelwriter-ppa-keyring.gpg] http://ppa.launchpad.net/vkbo/novelwriter/ubuntu focal main" | sudo tee /etc/apt/sources.list.d/novelwriter.list
+
+Then run the update and install commands as for Ubuntu:
+
+.. code-block:: bash
+
+   sudo apt update
+   sudo apt install novelwriter
 
 .. note::
-   The text below assumes the command ``python`` corresponds to a Python 3 executable. Python 2 is
-   now deprecated, but many systems still have both Python 2 and 3. For such systems, the command
-   ``python3`` may be needed instead. On Linux, the scripts can also be made executable and run
-   without the ``python`` command. Likewise, ``pip`` may need to be replaced with ``pip3``.
+
+   Please use the Ubuntu 20.04 (focal) packages for Debian. The newer Ubuntu packages use a
+   different compression algorithm that Debian doesn't currently support.
 
 
-.. _a_started_depend:
+AppImage Releases
+-----------------
 
-Dependencies
-============
-
-novelWriter has been designed to rely on as few dependencies as possible. Aside from the packages
-needed to communicate with the Qt GUI libraries, only one package is required for handling the XML
-format of the main project file. Everything else is handled with standard Python libraries.
-
-The following Python packages are needed to run novelWriter:
-
-* ``pyqt5`` – needed for connecting with the Qt5 libraries.
-* ``lxml`` – needed for full XML support.
-* ``pyenchant`` – needed for efficient spell checking (optional).
-
-PyQt/Qt should be at least 5.3, but ideally 5.10 or higher for nearly all features to work. For
-instance, searching using regular expressions with full Unicode support requires 5.13. There is no
-known minimum version requirement for package ``lxml``, but the code was originally written with
-4.2, which is therefore set as the minimum. It may work on lower versions. You have to test it.
-
-Optionally, a package can be installed to interface with the Enchant spell checking libaries, but
-this isn't strictly required. If no external spell checking library is available, novelWriter falls
-back to using the internal ``difflib`` of Python to check spelling. This is a slower and less
-sophisticated spell checker than the full spell checking libaries. The spell check library must be
-at least 3.0 to work with Windows. On Linux, 2.0 also works fine.
-
-If you install from PyPi, these dependencies should be installed automatically. If you install from
-source, dependencies can still be installed from PyPi with:
-
-.. code-block:: console
-
-   pip install -r requirements.txt
+For other Linux distros than the ones mentioned above, the primary option is AppImage_. These are
+completely standalone images for the app that include the necessary environment to run novelWriter.
+They can of course be run on any Linux distro, if you prefer this to native packages.
 
 
-.. _a_started_install:
+.. _a_started_minimal:
 
-Installing via PyPi
-===================
+Minimal Package Install
+=======================
 
-The application is written in Python 3 using Qt5 via PyQt5. It is developed on Linux, but it should
-in principle work fine on other operating systems as long as dependencies are met.
+On the `main website`_ and on the Releases_ page on GitHub you will also find "Minimal Package"
+install files for Windows, Linux and macOS. These are zip files of just the files you need to run
+novelWriter on that specific platform.
 
-You can download the latest version of novelWriter from the source repository on GitHub_.
-novelWriter is also hosted on PyPi_, and can be installed on all operating systems that support Qt5
-and Python 3. It is regularly tested on Linux, Windows and macOS. The latest version of novelWriter
-is |release|.
+These zip files don't include any dependencies, so you must install them separately.
+
+
+.. _a_started_minimal_windows:
+
+Minimal Package on Windows
+--------------------------
+
+First, make sure you have Python installed on your system. If you don't, you can download it from
+`python.org`_. Python 3.7 or higher is required, but it is recommended that you install the latest
+version.
+
+Make sure you select the "Add Python to PATH" option during installation, otherwise the ``python``
+command will not work in the command line window.
+
+.. figure:: images/python_win_install.png
+   :align: center
+   :width: 500
+
+When Python is installed, extract the novelWriter zip file and move the extracted folder to a
+suitable location. You should probably not keep it on your desktop or in your downloads folder
+where it may be accidentally deleted. Instead, move and rename it to for instance
+``C:\novelWriter``.
+
+After you've got the folder where you want it, open it and double-click the file named
+``windows_install.bat``. This will open a command line window and run the setup script to install
+dependencies, and add desktop and start menu icons.
+
+Running ``windows_uninstall.bat`` will reverse the process if you wish to uninstall. After that,
+you can just delete the novelWriter folder.
+
+
+.. _a_started_minimal_linux:
+
+Minimal Package on Linux
+------------------------
+
+On Linux you need to install the following packages on Debian-based distros, including Ubuntu and
+Linux Mint:
+
+.. code-block:: bash
+
+   sudo apt install python3-pyqt5 python3-lxml python3-enchant
+
+On Fedora, you need the following packages:
+
+.. code-block:: bash
+
+   sudo dnf install python3-qt5 python3-lxml python3-enchant
+
+A standard desktop launcher can be installed via the main setup script. It will create the needed
+desktop file and add it to the Applications menu. The necessary icons will also be installed, and a
+file association with ``.nwx`` project files added.
+
+To set this up, run the following from inside the extracted novelWriter folder:
+
+.. code-block:: bash
+
+   python3 setup.py xdg-install
+
+This installs icons for the current user. Run with ``sudo`` to install system-wide.
+
+To uninstall the icons, run:
+
+.. code-block:: bash
+
+   python3 setup.py xdg-uninstall
+
+
+.. _a_started_minimal_mac:
+
+Minimal Package on macOS
+------------------------
+
+These instructions assume you're using brew, and have Python and pip set up. If not, see the
+`brew docs`_ for help. The main requirements for novelWriter are installed via the requirements
+file. You also need to install the ``pyobjc`` package, so you should run:
+
+.. code-block:: bash
+
+   pip3 install --user -r requirements.txt
+   pip3 install --user pyobjc
+
+For spell checking you may also need to install the enchant package. It comes with a lot of default
+dictionaries.
+
+.. code-block:: bash
+
+   brew install enchant
+
+With the dependencies in place, you can launch the ``novelWriter.py`` script directly to run
+novelWriter.
+
+.. note::
+   Right now there isn't a better integration with macOS available. Contributions from someone more
+   familiar with macOS would be very much appreciated. See the macOS_ issue on GitHub.
+
+
+.. _a_started_pip:
+
+Install from PyPi
+=================
+
+novelWriter is also available on the Python Package Index, or PyPi_. This install method works on
+all supported operating systems.
 
 To install from PyPi you must first have the ``python`` and ``pip`` commands available on your
-system. If you don't, see specific instructions for your operating system in this documentation.
+system. If you don't, see specific instructions for your operating system in this documentation on
+how to get the Python environment set up.
+
 To install novelWriter from PyPi, use the following command:
 
-.. code-block:: console
+.. code-block:: bash
 
    pip install novelwriter
 
 To upgrade an existing installation, use:
 
-.. code-block:: console
+.. code-block:: bash
 
    pip install --upgrade novelwriter
 
 When installing via pip, novelWriter can be launched from command line with:
 
-.. code-block:: console
+.. code-block:: bash
 
-   novelWriter
+   novelwriter
 
 Make sure the install location for pip is in your PATH variable. This is not always the case by
 default.
 
-
-.. _a_started_docs:
-
-Building the Documentation
-==========================
-
-If you installed novelWriter from a package, the documentation should be bre-built and included. If
-you're running novelWriter from the source code, a local copy of this documentation can be
-generated. It requires the following Python packages on Debian and Ubuntu.
-
-* ``python3-sphinx``
-* ``python3-sphinxcontrib.qthelp``
-
-Or from PyPi:
-
-.. code-block:: console
-
-   pip install sphinx sphinxcontrib-qthelp
-
-The documentation can then be built from the ``docs`` folder in the source code by running:
-
-.. code-block:: console
-
-   make html
-
-If successful, the documentation should be available in the ``docs/build/html`` folder and you can
-open the ``index.html`` file in your browser.
-
-The documentation can also be built for the Qt Assistant. To build the help packages from the
-documentation source, run the following from the root source folder:
-
-.. code-block:: console
-
-   python setup.py qthelp
-
-The setup script will copy the generated files into the ``nw/assets/help`` folder, and novelWriter
-will detect the presence of the files and redirect the menu help entry to open help locally instead
-of sending the user to the website. Pressing the :kbd:`F1` key will in any case try to open help
-locally first, then send you to the website as a fallback.
-
 .. note::
-   In order for the local version of help to work, the Qt Assistant must be installed on the local
-   computer. If it isn't available, or novelWriter cannot find it, the help feature will fall back
-   to redirecting you to the documentation website.
+   On systems with both Python 2 and 3, you may have to replace the ``pip`` command with ``pip3``.

docs/source/project_export.rst

@@ -1,11 +1,17 @@
 .. _a_export:
 
-******************
-Exporting Projects
-******************
+***********************
+Building the Manuscript
+***********************
 
-The novelWriter project can be exported in various formats using the build tool available from
-:guilabel:`Build Novel Project` in the :guilabel:`Tools` menu, or by pressing :kbd:`F5`.
+You can at any time build a manuscript, an outline of your notes, or any other type of document
+from the text in your project. All of this is handled by the :guilabel:`Build Novel Project` tool.
+You can activate it from the sidebar, the :guilabel:`Tools` menu, or by pressing :kbd:`F5`.
+
+.. note::
+   This tool is scheduled to receive a full update in novelWriter 2.1, adding many new features
+   requested by users. See the `2.1 Milestone <https://github.com/vkbo/novelWriter/milestone/43>`_
+   for an overview.
 
 
 .. _a_export_headers:
@@ -13,7 +19,7 @@ The novelWriter project can be exported in various formats using the build tool
 Header Formatting
 =================
 
-The titles for the five types of titles (the chapter headings come in a numbered and unnumbered
+The titles for the five types of headings (the chapter headings come in a numbered and unnumbered
 version) of story structure can be formatted collectively in the build tool. This is done through
 a series of keyword–replace steps. They are all on the format ``%keyword%``.
 
@@ -23,19 +29,19 @@ a series of keyword–replace steps. They are all on the format ``%keyword%``.
 
 ``%ch%``
    This will be replaced by a chapter number. The number is incremented by one each time the build
-   tool sees a new heading of level two in a document with layout :guilabel:`Chapter`. If the
-   document has layout :guilabel:`Unnumbered`, the counter is *not* incremented. The latter is
-   useful for for instance Prologue and Epilogue chapters. Adding an asterisk (``*``) in front of
-   the title text of a level two heading will also disable the chapter counter for that heading.
+   tool sees a new heading of level two in a document, unless the heading formatting code has the
+   added ``!``. In the latter case, the counter is *not* incremented. This is useful for for
+   instance Prologue and Epilogue chapters.
 
 ``%chw%``
-   Behaves like ``%ch%``, but the number is represented as a number word.
+   Behaves like ``%ch%``, but the number is represented as a number word. You can select between a
+   number of different languages.
 
 ``%chi%``
-   Begaves like ``%ch%``, but the number is represented as a lower case Roman number.
+   Begaves like ``%ch%``, but represented as a lower case Roman number from 1 to 4999.
 
 ``%chI%``
-   Behaves like ``%ch%``, but the number is represented as an upper case Roman number.
+   Behaves like ``%ch%``, but represented as an upper case Roman number from 1 to 4999.
 
 ``%sc%``
    This is the number counter equivalent for scenes. These are incremented each time a heading of
@@ -50,9 +56,7 @@ a series of keyword–replace steps. They are all on the format ``%keyword%``.
    This inserts a line break within the title.
 
 .. note::
-   Header formatting only applies to novel documents. Headings in notes will be left as-is on
-   export. However, heading levels 1 through 4 are converted to the correct heading level in the
-   respective output formats.
+   Header formatting only applies to novel documents. Headings in notes will be left as-is.
 
 **Example**
 
@@ -68,7 +72,7 @@ Scene Separators
 
 If you don't want any titles for your scenes (or for your sections if you have them), you can leave
 the formatting boxes empty. If so, an empty paragraph will be inserted between the scenes or
-sections instead.
+sections instead, resulting in a gap in the text.
 
 Alternatively, if you want a separator between them, like the common ``* * *``, you can enter the
 desired separator text in the formatting box. In fact, if the format is a piece of static text, it
@@ -80,14 +84,9 @@ will always be treated as a separator.
 File Selection
 ==============
 
-Which documents and notes are selected for export can be controlled from the options on the left
-side of the dialog window. The switch for :guilabel:`Include novel files` will select any document
-that isn't classified as a note. The switch for :guilabel:`Include note files` will select any
-document that *is* a note. This allows for exporting just the novel, just your notes, or both, as
-you see fit.
-
-In addition, you can select to export the synopsis comments, regular comments, keywords, and even
-exclude the body text itself.
+Which documents and notes are selected for the build can be controlled from the options on the left
+side of the dialog window. In addition, you can select to include the synopsis comments, regular
+comments, keywords, and even exclude the body text itself if you just want an outline.
 
 .. tip::
    If you for instance want to export a document with an outline of the novel, you can enable
@@ -95,11 +94,9 @@ exclude the body text itself.
    followed by the tags and references and the synopsis.
 
 If you need to exclude specific documents from your exports, like draft documents or documents you
-want to take out of your manuscript, but don't want to delete, you can un-check the
-:guilabel:`Include when building project` option for each document in the project tree. An included
-document has a checkmark after the status icon in the :guilabel:`Flags` column. The
-:guilabel:`Build Novel Project` tool has a switch to ignore this flag if you need to collectively
-override these settings.
+want to take out of your manuscript, but don't want to delete, you can set the documents as
+"inactive" in the project tree. :guilabel:`Build Novel Project` tool has a switch to collectively
+exclude inactive documents.
 
 
 .. _a_export_print:
@@ -108,8 +105,12 @@ Printing
 ========
 
 The print button allows you to print the content in the preview window. You can either print to one
-of your system's printers, or print directly to file. You can also print to file from the regular
-print dialog. The direct to file option is just a shortcut.
+of your system's printers, or print directly to a file as PDF. You can also print to file from the
+regular print dialog. The direct to file option is just a shortcut.
+
+.. note::
+   The paper format should in all cases default to whatever your system default is. Of you want to
+   change it, you have to select it from the :guilabel:`Print Preview`` dialog.
 
 
 .. _a_export_formats:
@@ -117,16 +118,17 @@ print dialog. The direct to file option is just a shortcut.
 Export Formats
 ==============
 
-Currently, six formats are supported for exporting.
+Currently, six formats are supported.
 
 Open Document Format
    The Build tool can produce either an ``.odt`` file, or an ``.fodt`` file. The latter is just a
-   flat version of the document format as a single XML file.
+   flat version of the document format as a single XML file. Most rich text editors support the
+   former, and a few the latter.
 
 novelWriter HTML
-   The HTML export format writes a single ``.htm`` file with minimal style formatting. The exported
-   HTML document is suitable for further processing by document conversion tools like Pandoc, for
-   importing in word processors, or for printing from browser.
+   The HTML format writes a single ``.htm`` file with minimal style formatting. The HTML document
+   is suitable for further processing by document conversion tools like Pandoc, for importing in
+   word processors, or for printing from browser.
 
 novelWriter Markdown
    This is simply a concatenation of the project documents selected by the filters. The documents
@@ -135,23 +137,23 @@ novelWriter Markdown
    import back into novelWriter.
 
 Standard/GitHub Markdown
-   The Markdown export format comes in both Standard and GitHub flavour. The *only* difference in
-   terms of novelWriter functionality is the support of strikethrough text, which is not supported
-   by the Standard flavour, but *is* supported by the GitHub flavour.
+   The Markdown format comes in both Standard and GitHub flavour. The *only* difference in terms of
+   novelWriter functionality is the support for strikethrough text, which is not supported by the
+   Standard flavour, but *is* supported by the GitHub flavour.
 
 
 .. _a_export_options:
 
-Additional Export Options
-=========================
+Additional Formats
+==================
 
 In addition to the above document formats, the novelWriter HTML and Markdown formats can also be
 wrapped in a JSON file. These files will have a meta data entry and a body entry. For HTML, also
-the accompanying css styles are exported.
+the accompanying css styles are included.
 
-The text body is saved in a two-level list. The outer list contains one entry per exported
-document, in the order they appear in the project tree. Each document is then split up into a list
-as well, with one entry per paragraph it contains.
+The text body is saved in a two-level list. The outer list contains one entry per document, in the
+order they appear in the project tree. Each document is then split up into a list as well, with one
+entry per paragraph it contains.
 
 These files are mainly intended for scripted post-processing for those who want that option. A JSON
 file can be imported directly into a Python dict object or a PHP array, to mentions a few options.

docs/source/project_notes.rst

@@ -13,9 +13,9 @@ The relation between all these additional elements is extracted from the documen
 project indexer, based on the tags and references you set within them.
 
 Using notes is not required, but making at least minimal notes for each plot element, and adding a
-tag to them, makes it possible to use the :guilabel:`Outline` feature to see how each element
-intersects with each section of the novel itself, and adds clickable cross-references between
-documents in the editor and viewer.
+tag to them, makes it possible to use the Outline View to see how each element intersects with each
+section of the novel itself, and adds clickable cross-references between documents in the editor
+and viewer.
 
 
 .. _a_notes_tags:
@@ -24,10 +24,10 @@ Tags in Notes
 =============
 
 Each new heading in a note can have a tag associated with it. The format of a tag is
-``@tag: tagname``, where tagname is a unique identifier. Tags can then be referenced in the novel
-documents, or cross-referenced in other notes, and will show up in the outline view and in the
-back-reference panel when a document is being viewed. See :ref:`a_struct_tags` for how to reference
-notes.
+``@tag: tagname``, where tagname is a unique identifier of your choosing. Tags can then be
+referenced in the novel documents, or cross-referenced in other notes, and will show up in the
+Outline View and in the back-reference panel when a document is opened in the viewer. See
+:ref:`a_struct_tags` for how to reference notes.
 
 The syntax highlighter will alert the user that the keyword is correctly used and that the tag is
 allowed, that is, the tag is unique. Duplicate tags should be detected as long as the index is up
@@ -36,15 +36,37 @@ colour that valid tags do.
 
 The tag is the only part of these notes that the application uses. The rest of the document content
 is there for the writer to use in whatever way they wish. Of course, the content of the documents
-can be exported if you want to compile a single document of all your notes, or include them in an
-outline.
+can be added to the manuscript, or an outline document. If you want to compile a single document of
+all your notes, you can do this from the :guilabel:`Build Novel Project` tool.
 
-A note can also reference other notes in the same way novel documents do. When the note is opened
-in the view panel, the references become clickable links, making it easier to follow connections in
-the plot. Notes don't show up in the outline view though, so referencing between notes is only
-meaningful if you want to be able to click-navigate between them.
+One note can also reference another note in the same way novel documents do. When the note is
+opened in the view panel, the references become clickable links, making it easier to follow
+connections in the plot. Notes don't show up in the Outline View though, so referencing between
+notes is only meaningful if you want to be able to click-navigate between them, or of course if you
+just want to highlight that two notes are related.
 
 .. tip::
    If you cross-reference between notes and export your project as an HTML document using the
    :guilabel:`Build Novel Project` tool, the cross-references become clickable links in the
    exported HTML document.
+
+Example of a project note with two headers, with separate tags, and with references to other notes:
+
+.. code-block:: none
+   :linenos:
+
+   # Main Characters
+
+   ## Jane Doe
+
+   @tag: Jane
+   @location: Earth
+
+   Something about Jane ...
+
+   ## John Doh
+
+   @tag: John
+   @location: Mars
+
+   Something about John ...

docs/source/project_overview.rst

@@ -4,11 +4,12 @@
 Novel Projects
 **************
 
-A new project can be created from the :guilabel:`Project` menu by selecting
-:guilabel:`New Project`. This will open the :guilabel:`New Project Wizard` that will assist you in
-creating a barebone project suited to your needs. A novelWriter project requires a dedicated folder
-for storing its files on the local file system. See :ref:`a_tech` for further details on how files
-are organised.
+New projects can be created from the :guilabel:`Project` menu by selecting :guilabel:`New Project`.
+This will open the :guilabel:`New Project Wizard` that will assist you in creating a barebone
+project suited to your needs.
+
+A novelWriter project requires a dedicated folder for storing its files on the local file system.
+See :ref:`a_storage` for further details on how files are organised.
 
 A list of recently opened projects is maintained, and displayed in the :guilabel:`Open Project`
 dialog. A project can be removed from this list by selecting it and pressing the :kbd:`Del` key or
@@ -25,33 +26,42 @@ including word counts, and a table of contents with word and page counts, is ava
 Project Roots
 =============
 
-Projects are structured into a set of top level folders called *root folders*. They are visible in
+Projects are structured into a set of top level folders called "Root Folders". They are visible in
 the project tree at the left side of the main window.
 
-The core novel documents go into a root folder of type :guilabel:`Novel`. Other supporting
-documents go into the other root folders. These other root folder types are intended for your notes
-on the various elements of your story. Using them is of course entirely optional.
+The novel documents go into a root folder of type :guilabel:`Novel`. Project notes go into the
+other root folders. These other root folder types are intended for your notes on the various
+elements of your story. Using them is of course entirely optional.
 
 A new project may not have all of the root folders present, but you can add the ones you want from
-:guilabel:`Create Root Folder` in the :guilabel:`Project` menu.
+the project tree tool bar.
 
-The root folders are intended for the following use, but aside from the :guilabel:`Novel` folder,
-no restrictions are enforced by the application. You can use them however you want.
+Each root folder has one or more reference keyword associated with it that is used to reference
+them from other documents and notes. The intended usage of each type of root folder is listed
+below. However, aside from the :guilabel:`Novel` folder, no restrictions are applied by the
+application on what you put in them. You can use them however you want.
+
+.. tip::
+   You can make multiple root folders of each kind if you wish to split up your notes.
+
+.. note::
+   It is not the notes themselves that are referenced by the listed reference keywords, but tags
+   set within the notes. See the examples below and in :ref:`a_struct_tags`.
 
 :guilabel:`Novel`
-   This is the root folder of all text that goes into the final novel. This class of documents have
-   other rules and features than other documents in the project. See :ref:`a_struct` for more
+   This is the root folder of all text that goes into the final novel or novels. This class of
+   documents have other rules and features than the project notes. See :ref:`a_struct` for more
    details.
 
 :guilabel:`Plot`
    This is the root folder where main plots can be outlined. It is optional, but adding at least
-   dummy notes can be useful in order to tag plot elements for the Outline view. Tags in this
+   brief notes can be useful in order to tag plot elements for the Outline View. Tags in this
    folder can be references using the ``@plot`` keyword.
 
 :guilabel:`Characters`
-   Character notes go in this root folder. These are especially important if one wants to use the
-   Outline view to see which character appears where, and which part of the story is told from a
-   specific character's point-of-view or focusing on a particular character's storyline. Tags in
+   Character notes go in this root folder. These are especially important if you want to use the
+   Outline View to see which character appears where, and which part of the story is told from a
+   specific character's point-of-view, or focusing on a particular character's storyline. Tags in
    this folder can be referenced using the ``@pov`` keyword for point-of-view characters,
    ``@focus`` for a focus character, or the ``@char`` keyword for any other characters.
 
@@ -80,10 +90,31 @@ no restrictions are enforced by the application. You can use them however you wa
 The root folders correspond to the categories of tags that can be used to reference them. For more
 information about the tags listed, see :ref:`a_struct_tags`.
 
-.. tip::
-   You can rename root folders to whatever you want. The first character in the :guilabel:`Flags`
-   column in the project tree will still indicate what type they are, and so will the icon if you
-   are using one of the optional icon sets.
+.. note::
+   You can rename root folders to whatever you want. However, this doesn't change the reference
+   keyword.
+
+Example of a character note:
+
+.. code-block:: none
+   :linenos:
+
+   # Jane Doe
+
+   @tag: Jane
+
+   Some information about the character Jane Doe.
+
+Example of a novel scene referencing the above character:
+
+.. code-block:: none
+   :linenos:
+
+   ### Chapter 1, Scene 1
+
+   @pov: Jane
+
+   When Jane woke up that morning ...
 
 
 .. _a_proj_roots_del:
@@ -96,21 +127,18 @@ trash folder can then be deleted permanently, either individually, or by emptyin
 the menu. Documents in the trash folder are removed from the project index and cannot be
 referenced.
 
-Folders and root folders can only be deleted when they are empty. Recursive deletion is not
-supported. A document or a folder can be deleted from the :guilabel:`Project` menu, or by pressing
-:kbd:`Ctrl`:kbd:`Shift`:kbd:`Del`.
+A document or a folder can be deleted from the :guilabel:`Project` menu, or by pressing
+:kbd:`Ctrl`:kbd:`Shift`:kbd:`Del`. Root folders can only be deleted when they are empty.
 
 
 .. _a_proj_roots_out:
 
-Archived Documents (Outtakes)
------------------------------
+Archived Documents
+------------------
 
 If you don't want to delete a document, or put it in the :guilabel:`Trash` folder where it may be
-deleted, but still want it out of your main project tree, you can create an :guilabel:`Outtakes`
-root folder from the :guilabel:`Project` menu. You are not allowed to move entire folders to this
-root folder, only documents. If you need folders in it to organise your documents, you can of
-course create new ones there.
+deleted, but still want it out of your main project tree, you can create an :guilabel:`Archive`
+root folder.
 
 You can drag any document to this folder and preserve its settings. The document will always be
 excluded from the :guilabel:`Build Novel Project` builds. It is also removed from the project
@@ -127,7 +155,7 @@ file synchronisation tool that runs out of sync, there may be files in the proje
 aren't tracked in the core project file. These files, when discovered, are recovered and added back
 into the project if possible.
 
-The discovered files are scanned for meta information that gives clues as to where the document may
+The discovered files are scanned for meta information that give clues as to where the document may
 previously have been located in the project. The project loading routines will try to put them back
 as close as possible to this location, if it still exists. Generally, it will be appended to the
 end of the folder where it previously was located. If that folder doesn't exist, it will try to add
@@ -161,7 +189,7 @@ this warning, and continue opening the project at your own risk.
    the project are in fact open, you are likely to cause inconsistencies and create diverging
    project files, potentially resulting in loss of data and orphaned files. You are not likely to
    lose any actual text unless both instances have the same document open in the editor, and
-   novelWriter will try to resolve inconsistencies the next time you open the project.
+   novelWriter will try to resolve project inconsistencies the next time you open the project.
 
 
 .. _a_proj_roots_dirs:
@@ -178,9 +206,10 @@ and to be able to collapse and hide them in the project tree when you're not wor
 documents.
 
 .. tip::
-   You can use folders to sort your scene documents into chapters. You will still need to add a
-   chapter document as the first item of your chapter folder, and the scene documents as the
-   following items. Another way to use folders is to make a folder for each act.
+   You can add child documents to other documents. This is particularly useful when you create
+   chapters and scenes. If you add separate scene documents, you should also add separate chapter
+   documents, even if they only contain a chapter heading. You can then add scene documents as
+   child items to the chapters.
 
 
 .. _a_proj_files:
@@ -188,20 +217,15 @@ documents.
 Project Documents
 =================
 
-New documents can be created from the :guilabel:`Document` menu, or by pressing :kbd:`Ctrl`:kbd:`N`
-while in the project tree. This will create a new, empty document, and open the :guilabel:`Item
-Settings` dialog where the document label and various other settings can be changed. This dialog
-can also be opened again later from either the :guilabel:`Project` menu, selecting :guilabel:`Edit
-Project Item`, or by pressing :kbd:`Ctrl`:kbd:`E` or :kbd:`F2` with the item selected.
+New documents can be created from the tool bar in the Project Tree, or by pressing
+:kbd:`Ctrl`:kbd:`N`. This will open the create new item menu and let you choose between a number of
+pre-defined documents and folders. You will be prompted for a label for the new item. You can
+always rename an item by selecting :guilabel:`Rename Item` from the :guilabel:`Project` menu, or by
+pressing :kbd:`F2`.
 
-The layout of the document is also defined here. For Novel documents, the full list of layout
-options are available. For non-Novel documents, only :guilabel:`Note` is available. See
-:ref:`a_struct_layout` for more details.
-
-You can also select whether the document is by default included when building the project. This
-setting can be overridden in the :guilabel:`Build Novel Project` tool if you wish to include them
-anyway. This is covered in the :ref:`a_export_files` section. You can also toggle the included
-state of a document from the right-click context menu.
+Other settings for project items are available from the context menu that you can activate by
+right-clicking on an item in the Project Tree. The :guilabel:`Transform` submenu includes options
+for converting, splitting, or merging items.
 
 
 .. _a_proj_files_counts:
@@ -210,11 +234,11 @@ Word Counts
 -----------
 
 A character, word and paragraph count is maintained for each document, as well as for each section
-of a document following a header. The word count, and change of words in the current session, is
+of a document following a header. The word count and change of words in the current session is
 displayed in the footer of any document open in the editor, and all stats are shown in the details
 panel below the project tree for any document selected in the project or novel tree.
 
-The word counts are not updated in real time, but run in the background every five seconds for as
+The word counts are not updated in real time, but run in the background every few seconds for as
 long as the document is being actively edited.
 
 A total project word count is displayed in the status bar. The total count depends on the sum of
@@ -235,17 +259,16 @@ The :guilabel:`Project Settings` can be accessed from the :guilabel:`Project` me
 Settings Tab
 ------------
 
-The :guilabel:`Settings` tab holds the project title and author settings.
+The :guilabel:`Settings` tab holds the project name, title, and author settings.
 
-The :guilabel:`Working Title` can be set to a different title than the :guilabel:`Book Title`. The
-difference between them is simply that the :guilabel:`Working Title` is used for the GUI (main
-window title) and for generating the backup files. The intention is that the :guilabel:`Working
-Title` should remain unchanged throughout the project, otherwise the name of exported files and
-backup files may change too.
+The :guilabel:`Project Name` can be set to a different value than the :guilabel:`Novel Title`. The
+difference between them is simply that the :guilabel:`Project Name` is used for the GUI (main
+window title) and for generating the backup files. The intention is that the
+:guilabel:`Project Name` should remain unchanged throughout the project's lifetime, otherwise the
+name of exported files and backup files may change too.
 
-The :guilabel:`Book Title` and :guilabel:`Book Authors` settings are currently not used for
-anything, so setting then is just for the benefit of the author. Future features may be using them,
-and they are exported on some export formats in the :guilabel:`Build Novel Project` tool.
+The :guilabel:`Novel Title` and :guilabel:`Authors` settings are used when building the manuscript,
+for some formats.
 
 If your project is in a different language than your main spell checking is set to, you can
 override the default spell checking language here. You can also override the automatic backup
@@ -255,14 +278,14 @@ setting.
 Status and Importance Tabs
 --------------------------
 
-Each document or folder of type :guilabel:`Novel` can be given a status level, signified by a
-coloured icon, and each document or folder of the remaining types can be given an importance level.
-These are colour coded icons and labels that can be applied to each document or folder.
+Each document or folder of type :guilabel:`Novel` can be given a *Status*_* label accompanied by a
+coloured icon, and each document or folder of the remaining types can be given an *Importance*
+label.
 
 These are purely there for the user's convenience, and you are not required to use them for any
 other features to work. No other part of novelWriter accesses this information. The intention is to
 use these to indicate at what stage of completion each novel document is, or how important the
-content of a note is to the plot. You don't have to use them this way, that's just what they were
+content of a note is to the story. You don't have to use them this way, that's just what they were
 intended for, but you can make them whatever you want.
 
 See also :ref:`a_ui_tree_status`.
@@ -277,10 +300,10 @@ Auto-Replace Tab
 
 A set of automatically replaced keywords can be added in this tab. The keywords in the left column
 will be replaced by the text in the right column when documents are opened in the viewer. They will
-also be applied to exports.
+also be applied to manuscript builds.
 
 The auto-replace feature will replace text in angle brackets that are in this list. The syntax
-highlighter will add an alternate colour to text marching the syntax, but it doesn't check if the
+highlighter will add an alternate colour to text matching the syntax, but it doesn't check if the
 text is in this list.
 
 .. note::
@@ -298,16 +321,17 @@ An automatic backup system is built into novelWriter. In order to use it, a back
 the backup files are to be stored must be provided in :guilabel:`Preferences`.
 
 Backups can be run automatically when a project is closed, which also implies it is run when the
-application itself is closed. Backups are date stamped zip files of the entire project folder, and
-are stored in a subfolder of the backup path. The subfolder will have the same name as the project
-:guilabel:`Working Title` set in :ref:`a_proj_settings`.
+application itself is closed. Backups are date stamped zip files of the project files in the
+project folder (files not strictly a part of the project are ignored). The zip archives are stored
+in a subfolder of the backup path. The subfolder will have the same name as the
+:guilabel:`Project Name` as defined in :ref:`a_proj_settings`.
 
 The backup feature, when configured, can also be run manually from the :guilabel:`Tools` menu.
-It is also possible to disable automated backup for a given project in :guilabel:`Project
-Settings`.
+It is also possible to disable automated backups for a given project in
+:guilabel:`Project Settings`.
 
 .. note::
-   For the backup to be able to run, the :guilabel:`Working Title` must be set in
+   For the backup to be able to run, the :guilabel:`Project Name` must be set in
    :guilabel:`Project Settings`. This value is used to generate the folder name for the zip files.
    Without it, the backup will not run at all, but it will produce a warning message.
 
@@ -318,18 +342,20 @@ Writing Statistics
 ==================
 
 When you work on a project, a log file records when you opened it, when you closed it, and the
-total word counts of your novel documents and notes at the end of the session. You can view this
+total word counts of your novel documents and notes at the end of the session, provided that the
+session lasted either more than 5 minutes, or that the total word count changed. You can view this
 file in the ``meta`` folder in the directory where you saved your project. The file is named
 ``sessionStats.log``.
 
 A tool to view the content of this file is available in the :guilabel:`Tools` menu under
-:guilabel:`Writing Statistics`. You can also launch it by pressing :kbd:`F6`.
+:guilabel:`Writing Statistics`. You can also launch it by pressing :kbd:`F6`, or find it on the
+Sidebar.
 
-The tool will show a list of all your sessions, and a set of filters to apply to it. You can also
-export the filtered data to a JSON file or to a CSV file that can be opened by a spreadsheet
+The tool will show a list of all your sessions, and a set of filters to apply to the data. You can
+also export the filtered data to a JSON file or to a CSV file that can be opened by a spreadsheet
 application like for instance Libre Office Calc.
 
 As of version 1.2, the log file also stores how much of the session time was spent idle. The
-definition of idle here is that the novelWriter main window loses focus, and the user hasn't made
+definition of idle here is that the novelWriter main window loses focus, or the user hasn't made
 any changes to the currently open document in five minutes. The number of minutes can be altered in
 :guilabel:`Preferences`.

docs/source/project_structure.rst

@@ -0,0 +1,208 @@
+.. _a_struct:
+
+***************
+Novel Structure
+***************
+
+This section covers the structure of a novel project.
+
+It concerns documents under the :guilabel:`Novel` type root folder only. There are some
+restrictions and features that only apply to these types of documents.
+
+
+.. _a_struct_heads:
+
+Importance of Headings
+======================
+
+Subfolders under root folders have no impact on the structure of the novel itself. The structure is
+instead dictated by the heading level of the headers within the documents.
+
+Four levels of headings are supported, signified by the number of hashes (``#``) preceding the
+title. See also the :ref:`a_fmt` section for more details about the markdown syntax.
+
+.. note::
+   The header levels are not only important when generating the manuscript, they are also used by
+   the indexer when building the outline tree in the Outline as well as the Novel Tree. Each
+   heading also starts a new region where new references and tags can be defined.
+
+The syntax for the four basic header types, and the two special header types, is listed in section
+:ref:`a_fmt_head`. The meaning of the four levels for the structure of your novel is as follows:
+
+**Header Level 1: Partition**
+   This header level signifies that the text refers to a top level partition. This is useful when
+   you want to split the manuscript up into books, parts, or acts. These headings are not required.
+   The novel title itself should use the special header level explained in :ref:`a_fmt_head`.
+
+**Header Level 2: Chapter**
+   This header level signifies a chapter level partition. Each time you want to start a new
+   chapter, you must add such a heading. If you choose to split your manuscript up into one
+   document per scene, you need a single chapter document with just the heading. You can of course
+   also add a synopsis and reference keywords to the chapter document. If you want to open the
+   chapter with a quote or other introductory text that isn't part of a scene, this is also where
+   you'd put that text.
+
+**Header Level 3: Scene**
+   This header level signifies a scene level partition. You must provide a title text, but the
+   title text can be replaced with a scene separator or just skipped entirely when you build your
+   manuscript.
+
+**Header Level 4: Section**
+   This header level signifies a sub-scene level partition, usually called a "section" in the
+   documentation and the user interface. These can be useful if you want to change tag references
+   mid-scene, like if you change the point-of-view character. You are free to use sections as you
+   wish, and you can filter them out of the final manuscript just like with scene titles.
+
+Page breaks are automatically added before level 1 and 2 headers when you build your project to a
+format that supports page breaks, or when you print the document directly from the build tool. If
+you want page breaks in other places, you have to specify them manually. See :ref:`a_fmt_break`.
+
+.. tip::
+   There are multiple options of how to process novel titles when building the manuscript. For
+   instance, chapter numbers can be applied automatically, and so can scene numbers if you want
+   them in a draft manuscript. See the :ref:`a_export` page for more details.
+
+
+.. _a_struct_heads_title:
+
+Novel Title and Front Matter
+----------------------------
+
+It is recommended that you add a document at the very top of each Novel root folder with the novel
+title as the first line. You should modify the level 1 header format code with an ``!`` in order to
+render it as a document title that is excluded from any automatic Table of Content in a manuscript
+build document, like so:
+
+``#! My Novel``
+
+The title is by default centred on the page. You can add more text to the page as you wish, like
+for instance the author's name and details.
+
+If you want an additional page of text after the title page, starting on a fresh page, you can add
+``[NEW PAGE]`` on a line by itself, and continue the text after it. This will insert a page break
+before the text. See also :ref:`a_fmt_break`.
+
+
+.. _a_struct_heads_unnum:
+
+Unnumbered Chapter Headings
+---------------------------
+
+If you use the automatic numbering feature for your chapters, but you want to keep some special
+chapters separate from this, you cam add a ``!`` to the level 2 header formatting code to tell the
+build tool to skip these chapters.
+
+``##! Unnumbered Chapter Title``
+
+There is a separate formatting feature for such chapters in the :guilabel:`Build Novel Project`
+tool as well. See the :ref:`a_export` page for more details. When building a document of a format
+that supports page breaks, also unnumbered chapters will have a page break added just like for
+normal chapters.
+
+.. Note::
+   Previously, you could also disable the automatic numbering of a chapter by adding an ``*`` as
+   the first character of the chapter title itself. This feature has been dropped in favour of the
+   current format in order to keep level 1 and 2 headers consistent. Please update your chapter
+   headings if you've used this syntax.
+
+
+.. _a_struct_tags:
+
+Note References
+===============
+
+Each text partition, indicated by a heading of any level, can contain references to tags set in the
+project notes of the project. The references are gathered by the indexer and used to generate the
+Outline View. This section covers how to make references to tags. See :ref:`a_notes_tags` for how
+to define tags the references can point to.
+
+References and tags are also clickable in the document editor and viewer, making it easy to
+navigate between reference notes while writing. Clicked links are always opened in the view panel.
+
+References are set as a keyword and a list of corresponding tags. The valid keywords are listed
+below. The format of a reference line is ``@keyword: value1, [value2] ... [valueN]``. All keywords
+allow multiple values.
+
+``@pov``
+   The point-of-view character for the current section. The target must be a note tag in a
+   :guilabel:`Character` type root folder.
+
+``@focus``
+   The character that has the focus for the current section. This can be used in cases where the
+   focus is not a point-of-view character. The target must be a note tag in a :guilabel:`Character`
+   type root folder.
+
+``@char``
+   Other characters in the current section. The target must be a note tag in a
+   :guilabel:`Character` type root folder. This should not include the point-of-view or focus
+   character if those references are used.
+
+``@plot``
+   The plot or subplot advanced in the current section. The target must be a note tag in a
+   :guilabel:`Plot` type root folder.
+
+``@time``
+   The timelines touched by the current section. The target must be a note tag in a
+   :guilabel:`Timeline` type root folder.
+
+``@location``
+   The location the current section takes place in. The target must be a note tag in a
+   :guilabel:`Locations` type root folder.
+
+``@object``
+   Objects present in the current section. The target must be a note tag in a :guilabel:`Object`
+   type root folder.
+
+``@entity``
+   Entities present in the current section. The target must be a note tag in a
+   :guilabel:`Entities` type root folder.
+
+``@custom``
+   Custom references in the current section. The target must be a note tag in a :guilabel:`Custom`
+   type root folder. The custom folder are for any other category of notes you may want to use.
+
+The syntax highlighter will alert the user that the tags and references are used correctly, and
+that the tags referenced exist.
+
+The highlighter may be mistaken if the index of defined tags is out of date. If so, press :kbd:`F9`
+to regenerate it, or select :guilabel:`Rebuild Index` from the :guilabel:`Tools` menu. In general,
+the index for a document is regenerated when it is saved, so this shouldn't normally be necessary.
+
+Example of a novel document with references to characters and plots:
+
+.. code-block:: none
+   :linenos:
+
+   ## Chapter 1
+
+   @pov: Jane
+
+   ### Scene 1
+
+   @char: John, Sam
+   @plot: Main
+
+   Once upon a time ...
+
+
+.. _a_struct_layout:
+
+Document Layout
+===============
+
+All documents in the project can have a layout format set. Previously, there were multiple layouts
+available to change how the documents where formatted on export. These have now been reduced to
+just two layouts: :guilabel:`Novel Document` and :guilabel:`Project Note`.
+
+Novel documents can only live in a :guilabel:`Novel` type root folder. You can also move them to
+:guilabel:`Archive` and :guilabel:`Trash` of course. Project notes can be added anywhere in the
+project.
+
+The project tree can distinguish between the different layouts and header levels of the documents
+using coloured icons, and optionally add emphasis on the label (See the :guilabel:`Preferences`.)
+For novel documents, the heading level of the first heading is recorded, and indicated by the icon.
+
+.. tip::
+   You can always start writing with a coarse setup with one or a few documents, and then later use
+   the split tool to split the documents into separate chapter and scene documents. You can split a
+   document on any of the four header levels.

docs/source/requirements.txt

@@ -1 +1,4 @@
-sphinx_rtd_theme
+furo
+sphinx>=4.0
+pygments>=2.7
+docutils==0.17.1

docs/source/setup_linux.rst

@@ -1,75 +0,0 @@
-.. _a_setup_linux:
-
-**************
-Setup on Linux
-**************
-
-.. _GitHub: https://github.com/vkbo/novelWriter/releases
-.. _main website: https://novelwriter.io
-
-This is a brief guide to how you can get novelWriter running on a Linux computer. There are
-currently no install package of novelWriter for Linux, so it is recommended that you download
-either the full source or minimal package and extract it to a practical location on your system and
-run the ``setup.py`` script.
-
-
-Running from Source
-===================
-
-To run novelWriter from source, download the latest source package from the release page on
-GitHub_ or the `main website`_, or if you have git running on your computer, you can also clone the
-repository.
-
-
-Step 1: Installing Dependencies
--------------------------------
-
-The dependencies of novelWriter are generally available from Linux distro repositories. For Debian
-and Ubuntu, they can be installed with:
-
-.. code-block:: console
-
-   sudo apt install python3-pyqt5 python3-lxml python3-enchant
-
-If you prefer to install dependencies via PyPi, or the repository dependencies are out of date, you
-can install them with:
-
-.. code-block:: console
-
-   pip3 install --user -r requirements.txt
-
-
-Step 2: Install Package (Optional)
-----------------------------------
-
-You can install novelWriter to the correct location for Python packages with:
-
-.. code-block:: console
-
-   ./setup.py install
-
-This is equivalent to what the ``pip`` installer does. It puts novelWriter in the location on your
-system where Python packages are usually kept. This is not really the best suited location for a
-GUI application like novelWriter, so you may instead copy the entire source to a suiteable location
-yourself.
-
-This should install novelWriter to either ``~/.local/bin/novelWriter`` if installed for local user
-only, or to ``/usr/local/bin/novelWriter`` if installed for all users (with the ``sudo`` command).
-
-
-Step 3: Create Launcher Icons
------------------------------
-
-Regardless of where you extract or install the source files, you can easily set up a standard icon
-and launcher. To set up this desktop launcher, the needed icons, and the project file association,
-run:
-
-.. code-block:: console
-
-   ./setup.py xdg-install
-
-By default, these commands install novelWriter and its icons for the current user only. To install
-for all users, run the script with the ``sudo`` command.
-
-.. tip::
-   All options of the setup script can be listed with: ``./setup.py help``.

docs/source/setup_mac.rst

@@ -1,67 +0,0 @@
-.. _a_setup_mac:
-
-**************
-Setup on macOS
-**************
-
-.. _GitHub: https://github.com/vkbo/novelWriter/releases
-.. _main website: https://novelwriter.io
-.. _brew docs: https://docs.brew.sh/Homebrew-and-Python
-
-This is a brief guide to how you can get novelWriter running on macOS. There are currently no
-install package of novelWriter for macOS, so it is recommended that you download either the full
-source or minimal package and extract it to a practical location on your system and
-run it.
-
-
-Running from Source
-===================
-
-To run novelWriter from source, download the latest source package from the release page on
-GitHub_ or the `main website`_, or if you have git running on your computer, you can also clone the
-repository.
-
-
-Step 1: Installing Dependencies
--------------------------------
-
-These instructions assume you're using brew, and have Python and pip set up. If not, see the
-`brew docs`_ for help. Main requirements are installed via the requirements file. You also need to
-install the ``pyobjc`` package, so you should run:
-
-.. code-block:: console
-
-   pip3 install --user -r requirements.txt
-   pip3 install --user pyobjc
-
-For spell checking you may also need to install the enchant package. It comes with a lot of default
-dictionaries.
-
-.. code-block:: console
-
-   brew install enchant
-
-With the dependencies in place, you can launch the ``novelWriter.py`` script directly to run
-novelWriter.
-
-
-Step 2: Install Package (Optional)
-----------------------------------
-
-You can install novelWriter to the correct location for Python packages with:
-
-.. code-block:: console
-
-   ./setup.py install
-
-This is equivalent to what the ``pip`` installer does. It puts novelWriter in the location on your
-system where Python packages are usually kept. This is not really the best suited location for a
-GUI application like novelWriter, so you may instead copy the entire source to a suiteable location
-yourself.
-
-After this, you should be able to launch novelWriter by running ``novelWriter`` in a command line
-window.
-
-.. note::
-   Right now there isn't a better integration with macOS available. Contributions from someone more
-   familiar with macOS would be very much appreciated.

docs/source/setup_windows.rst

@@ -1,110 +0,0 @@
-.. _a_setup_win:
-
-****************
-Setup on Windows
-****************
-
-This is a brief guide to how you can get novelWriter running on a Windows computer.
-
-Unlike other operating systems, Windows does not come prepared with an environment to run Python
-applications, so you must first install Python. After that, running novelWriter is straightforward.
-
-.. tip::
-   If you have any problems, you can always open a question on the project's discussions_ page.
-   This requires a GitHub account.
-
-.. _discussions: https://github.com/vkbo/novelWriter/discussions
-
-
-.. _a_setup_win_installer:
-
-Using the Installer
-===================
-
-The installer for Windows is no longer provided. See the `installer issue`_ for more info on why.
-You can still create the installer yourself if you want to. It can be generated with the provided
-``setup.py`` script. use the script's ``help`` command to get further instructions.
-
-Please use the "Running from Source" option below instead. It has been improved and a script has
-been added that does nearly the same thing.
-
-.. _installer issue: https://github.com/vkbo/novelWriter/issues/640
-
-
-.. _a_setup_win_source:
-
-Running from Source
-===================
-
-To run novelWriter from source, download the latest source zip file from the release page on
-GitHub_, or from the `main website`_. You can download the "Minimal Windows" zip file. It is a
-minimal version of the source that contains only the files needed for running on Windows. You can
-also download the full source if you wish.
-
-In order to make novelWriter run on your system, you must first have Python installed (Step 1).
-Thereafter, a script will do the rest of the job (Step 2). Alternatively, you can run this step
-manually from the command prompt if you wish to.
-
-.. tip::
-   If your system already has all the dependencies installed, you can run novelWriter directly from
-   the extracted folder by double-clicking the ``novelWriter.pyw`` file. However, running the
-   script also adds start icons.
-
-.. _GitHub: https://github.com/vkbo/novelWriter/releases
-.. _main website: https://novelwriter.io
-
-
-Step 1: Installing Python
--------------------------
-
-If you already have Python installed, you can skip this step. If you don't have it installed, you
-can download it from the python.org_ website. novelWriter should work with Python 3.6 or higher,
-but it is recommended that you install the latest version of Python.
-
-Make sure you select the "Add Python to PATH" option during installation, otherwise the ``python``
-command will not work in the command line window.
-
-.. image:: images/python_win_install.png
-   :width: 600
-
-.. _python.org: https://www.python.org/downloads/windows
-
-
-Step 2: Dependencies and Icons
-------------------------------
-
-**Alternative A: By Script**
-
-Open the folder where you extracted the novelWriter source, and double-click the file named
-``setup_windows.bat``. This should open a command line window and run the setup script to install
-dependencies, and add desktop and start menu icons.
-
-The script will also check that it can find Python on your system and alert you if it cannot run
-it. If you are sure you have installed it, but the script cannot find it, you probably didn't
-install it with the "Add Python to PATH" option mentioned in Step 1.
-
-.. note::
-   If you upgrade Python to a newer version and the path to ``pythonw.exe`` has therefore changed,
-   you may need to run this script again. You can also run it to upgrade dependencies to the latest
-   version.
-
-**Alternative B: Manual Installation**
-
-The above alternative can also be run manually.
-
-Open the windows command prompt. It can be launched by pressing the :kbd:`Win` key and typing "cmd".
-The "Command Prompt" app should then be in the list of applications.
-
-With the command prompt open, navigate to the folder where you extracted the novelWriter source,
-and run the following commands:
-
-.. code-block:: console
-
-   python setup.py pip
-   python setup.py win-install
-
-The first command will install the dependencies on your system from the `Python Package Index`_,
-and the second command will create a desktop icon and a start menu icon. That should be all that
-you need.
-
-.. _Python Package Index: https://pypi.org/

docs/source/tech_locations.rst

@@ -0,0 +1,56 @@
+.. _a_locations:
+
+**************
+File Locations
+**************
+
+.. _QStandardPaths: https://doc.qt.io/qt-5/qstandardpaths.html
+
+novelWriter will create a few files on your system outside of the application folder itself. These
+file locations are described in this document.
+
+
+.. _a_locations_conf:
+
+Configuration
+=============
+
+The general configuration of novelWriter, including everything that is in :guilabel:`Preferences`,
+is saved in one central configuration file. The location of this file depends on your operating
+system. The system paths are provided by the Qt QStandardPaths_ class and its ConfigLocation value.
+
+The standard paths are:
+
+* Linux: ``~/.config/novelwriter/novelwriter.conf``
+* macOS: ``~/Library/Preferences/novelwriter/novelwriter.conf``
+* Windows: ``C:\Users\<USER>\AppData\Local\novelwriter\novelwriter.conf``
+   
+Here, ``~`` corresponds to the user's home directory on Linux and macOS, and ``<USER>`` is the
+user's username on Windows.
+
+.. note::
+   These are the standard operating system defined locations. If your system has been set up in a
+   different way, these locations may also be different.
+
+
+.. _a_locations_data:
+
+Application Data
+================
+
+novelWriter also stores a bit of data that is generated by the user's actions. This includes the
+list of recent projects form the :guilabel:`Open Project` dialog. Custom themes should also be
+saved here. The system paths are provided by the Qt QStandardPaths_ class and its AppDataLocation.
+
+The standard paths are:
+
+* Linux: ``~/.local/share/novelwriter/``
+* macOS: ``~/Library/Application Support/novelwriter/``
+* Windows: ``C:\Users\<USER>\AppData\Roaming\novelwriter\``
+   
+Here, ``~`` corresponds to the user's home directory on Linux and macOS, and ``<USER>`` is the
+user's username on Windows.
+
+.. note::
+   These are the standard operating system defined locations. If your system has been set up in a
+   different way, these locations may also be different.

docs/source/tech_storage.rst

@@ -1,26 +1,26 @@
-.. _a_tech:
+.. _a_storage:
 
-*********************
-Technical Information
-*********************
+******************
+How Data is Stored
+******************
 
 This section contains details of how novelWriter stores and handles the project data.
 
 
-How Project Data is Stored
-==========================
+Project Structure
+=================
 
 All novelWriter files are written with utf-8 encoding. Since Python automatically converts Unix
 line endings to Windows line endings on Windows systems, novelWriter does not make any adaptations
 to the formatting on Windows systems. This is handled entirely by the Python standard library.
-Python also handles this fairly well when working on the same files on both Windows and Unix-based
-operating systems.
+Python also handles this when working on the same files on both Windows and Unix-based operating
+systems.
 
 
 Main Project File
 -----------------
 
-The project itself requires a dedicated folder for storing its files where novelWriter will create
+The project itself requires a dedicated folder for storing its files, where novelWriter will create
 its own "file system" where the folder and file hierarchy is described in a project XML file. This
 is the main project file in the project's root folder with the name ``nwProject.nwx``. This file
 also contains all the meta data required for the project, and a number of related project settings.
@@ -31,22 +31,21 @@ your own backup solution.
 
 .. tip::
    The novelWriter project folder is structured so that it can easily be added to a version control
-   system like git. If so, you may want to add a `.gitignore` file to exclude files with the
+   system like git. If you do so, you may want to add a `.gitignore` file to exclude files with the
    extensions `.json` as JSON files are used to cache the index and various run-time settings and
-   are generally large files that change often. You'd also want to exclude the ``cache`` folder.
+   are generally large files that change often.
 
-The project XML file is indent-formatted, suitable for diff tools and version control since most of
-the file will stay static, although a timesetamp is set in the meta section on line 2 each time the
-file is saved, and various meta data entries are incremented on each save.
+The project XML file is indent-formatted, and is suitable for diff tools and version control since
+most of the file will stay static, although a timesetamp is set in the meta section on line 2, and
+various meta data entries incremented, on each save.
 
 
 Project Documents
------------------
+=================
 
 All the project documents are saved in a folder in the main project folder named ``content``. Each
-document has a file handle taken from the first 13 characters of a SHA256 hash of the system time
-when the document was first created. The documents are saved with a filename assembled from this
-hash and the file extension ``.nwd``.
+document has a file handle based on a 52 bit random number, represented as a hexadecimal string.
+The documents are saved with a filename assembled from this handle and the file extension ``.nwd``.
 
 If you wish to find the file system location of a document in the project, you can either look it
 up in the project XML file, select :guilabel:`Show File Details` from the :guilabel:`Document` menu
@@ -56,13 +55,19 @@ where they are saved.
 
 The reason for this cryptic file naming is to avoid issues with file naming conventions and
 restrictions on different operating systems, and also to have a file name that does not depend on
-what the user names the document within the project, or changes it to.
+what the user names the document within the project, or changes it to. This is particularly useful
+when using a versioning system.
 
 Each document file contains a plain text version of the text from the editor. The file can in
 principle be edited in any text editor, and is suitable for diffing and version control if so
-desired. Just make sure the file remains in utf-8 encoding, otherwise unicode chatracters may
+desired. Just make sure the file remains in utf-8 encoding, otherwise unicode characters may
 become mangled when the file is opened in novelWriter again.
 
+Editing these files is generally not recommended outside of special circumstances, whatever they
+may be. The reason for this is that the index will not be automatically updated when doing so,
+which means novelWriter doesn't know you've altered the file. If you do edit a file in this manner,
+you should rebuild the index when you next open the project in novelWriter.
+
 The first lines of the file may contain some meta data starting with the characters ``%%~``. These
 lines are mainly there to restore some information if it is lost from the project file, and the
 information may be helpful if you do open the file in an external editor as it contains the
@@ -75,7 +80,7 @@ The File Saving Process
 -----------------------
 
 When saving the project file, or any of the documents, the data is first saved to a temporary file.
-If successful, the old data file is removed, and the temporary file becomes the new file. This
+If successful, the old data file is then removed, and the temporary file becomes the new file. This
 ensures that the previously saved data is only replaced when the new data has been successfully
 saved to the storage medium.
 
@@ -93,8 +98,8 @@ folder contains semi-important files. That is, they can be lost with only minor
 project.
 
 If you use version control software on your project, you can exclude this folder, although you may
-want to track the session log file. The JSON files within this folder can safely be ignored as they
-will be automatically regenerated if lost.
+want to track the session log file and the custom words list. The JSON files within this folder can
+safely be ignored as they will be automatically regenerated if lost.
 
 
 The Project Index
@@ -110,7 +115,7 @@ project, and the word counts within each header section.
 
 The integrity of the index is checked when the file is loaded. It is possible to corrupt the index
 if the file is manually edited and manipulated, so the check is important to avoid sudden crashes
-of novelWriter. if the file contains errors, novelWriter will automatically build it anew. If the
+of novelWriter. If the file contains errors, novelWriter will automatically build it anew. If the
 check somehow fails and novelWriter keeps crashing, you can delete the file manually and rebuild
 the index. If this too fails, you have likely encountered a bug.
 
@@ -126,6 +131,14 @@ The file is not critical, but if it is lost, all such GUI options will revert ba
 settings.
 
 
+Custom Word List
+----------------
+
+A file named ``meta/wordlist.txt`` contains all the custom words you've added to the project for
+spell checking purposes. The content of the file can be edited from the :guilabel:`Tools` menu. If
+you lose this file, all your custom spell check words will be lost too.
+
+
 Session Stats
 -------------
 
@@ -142,4 +155,5 @@ The project ``cache`` folder contains non-critical files. If these files are los
 impact on the functionality of novelWriter or the history of the project. It contains temporary
 files, like the preview document in the :guilabel:`Build Novel Project` tool.
 
-It should be excluded from version control tools if such are used.
+It should be excluded from version control tools if such are used. The folder will be removed
+entirely in novelWriter 2.1.

docs/source/tech_tests.rst

@@ -0,0 +1,85 @@
+.. _a_pytest:
+
+*************
+Running Tests
+*************
+
+The novelWriter source code is well covered by tests. The test framework used for the development
+is ``pytest`` with the use of an extension for Qt.
+
+
+Dependencies
+============
+
+The dependencies for running the tests can be installed with:
+
+.. code-block:: bash
+
+   pip install -r requirements-dev.txt
+
+This will install a couple of extra packages for coverage and test management. The minimum
+requirement is ``pytest`` and ``pytest-qt``.
+
+
+Simple Test Run
+===============
+
+To run the tests, you simply need to execute the following from the root of the source folder:
+
+.. code-block:: bash
+
+   pytest
+
+Since several of the tests involve opening up the novelWriter GUI, you may want to disable the GUI
+for the duration of the test run. Moving your mouse while the tests are running may otherwise
+interfere with the execution of some tests.
+
+You can disable the renderring of the GUI by setting the flag ``export QT_QPA_PLATFORM=offscreen``,
+or alternatively run the tests with the ``xvfb`` package, like so:
+
+.. code-block:: bash
+
+   xvfb-run pytest
+
+
+Advanced Options
+================
+
+Adding the flag ``-v`` to the ``pytest`` command will increase verbosity of the test execution.
+
+You can also add coverage report generation. For instance to HTML:
+
+.. code-block:: bash
+
+   xvfb-run pytest -v --cov=novelwriter --cov-report=html
+
+Other useful report formats are ``xml``, and ``term`` for terminal output.
+
+You can also run tests per subpackage of novelWriter with the ``-m`` command. The available
+subpackage groups are ``base``, ``core``, and ``gui``. Consider for instance:
+
+.. code-block:: bash
+
+   xvfb-run pytest -v --cov=novelwriter --cov-report=html -m core
+
+This will only run the tests of the "core" package, that is, all the classes that deal with the
+project data of a novelWriter project. The "gui" tests, likewise, will run the tests for the GUI
+components, and the "base" tests cover the bits in-between.
+
+You can also filter the tests with the ``-k`` switch. The following will do the same as
+``-m core``:
+
+.. code-block:: bash
+
+   xvfb-run pytest -v --cov=novelwriter --cov-report=html -k testCore
+
+All tests are named in such a way that you can filter them by adding more bits of the test names.
+They all start with the word "test". Then comes the group: "Core", "Base", "Dlg", "Tool", or "Gui".
+Finally comes the name of the class or module, which generally corresponds to a single source code
+file. For instance, running the following will run all tests for the document editor:
+
+.. code-block:: bash
+
+   xvfb-run pytest -v --cov=novelwriter --cov-report=html -k testGuiEditor
+
+To run a single test, simply add the full test name to the ``-k`` switch.

docs/source/usage_breakdown.rst

@@ -0,0 +1,209 @@
+.. _a_breakdown:
+
+************
+How it Works
+************
+
+.. _Fusion: https://doc.qt.io/qt-6/gallery.html
+.. _Pandoc: https://pandoc.org/
+.. _Typicons: https://github.com/stephenhutchings/typicons.font
+.. _Open Document: https://en.wikipedia.org/wiki/OpenDocument
+
+The main features of novelWriter are listed in the :ref:`a_intro` section. Here, we go into some
+more details on how they are implemented. This is intended as an overview. Later on in this
+documentation, these features will be covered in even more detail.
+
+
+.. _a_breakdown_design:
+
+GUI Layout and Design
+=====================
+
+The user interface of novelWriter is intended to be as minimalistic as practically possible, while
+at the same time provide a complete set of features needed for writing a novel.
+
+The main window does not have an editor toolbar like many other applications do. This reduces
+clutter, and since the documents are formatted with style tags, is more or less redundant. However,
+most formatting features supported are available through convenient keyboard shortcuts. They are
+also available in the main menu so you don't have to look up formatting codes every time you need
+them. For reference, a list of all shortcuts can be found in the :ref:`a_kb` section.
+
+.. note::
+   novelWriter is not intended to be a full office type word processor. It doesn't support images,
+   links, tables, and other complex structures and objects often needed for such documents.
+   Formatting is limited to headers, emphasis, text alignment, and a few other simple features.
+
+On the left edge of the main window, you will find a sidebar. This bar has buttons for the standard
+views you can switch between, a quick link to the :guilabel:`Build Novel Project` tool, and a set
+of project-related tools as well as quick access to settings at the bottom.
+
+
+Project Tree View
+-----------------
+
+When in :guilabel:`Project Tree View` mode, the main work area of the main window is split in two,
+or optionally three, panels. The left-most panel contains the project tree and all the documents in
+your project. The second panel is the document editor. An optional third panel on the right is a
+document viewer which can view any document in your project independently of what is open in the
+document editor. This panel is not intended as a preview window, although you can use it for this
+if you wish as it will apply the formatting tags you have specified. The main purpose of the viewer
+is for viewing your notes next to your editor while you're writing.
+
+The editor also has a :guilabel:`Focus Mode` you can toggle either from the menu, from the icon in
+the editor header, or by pressing :kbd:`F8`. When :guilabel:`Focus Mode` is enabled, all the user
+interface elements other than the document editor itself are hidden away.
+
+
+Novel Tree View
+---------------
+
+When in :guilabel:`Novel Tree View` mode, the project tree is replaces by an overview of your novel
+structure. Instead of showing individual documents, the tree now shows all headings of your novel
+text. This includes multiple headings within the same document.
+
+Each heading is indented according to the heading level. You can open and edit your novel documents
+from this view as well. All headings contained in the currently open document should be highlighted
+in the view to indicate which ones belong together.
+
+If you have multiple Novel root folders, the header of the novel view becomes a droopdown box. You
+can then switch between them by clicking the "Outline of ..." text. You can also click the novel
+icon button next to it.
+
+Generally, the novel view should update when you make changes to the novel structure, including
+edits of the current document in the editor. The information is only updated when the automatic
+save of the document is initiated though. You can adjust the aut-save interval in
+:guilabel:`Preferences`. You can also regenerate the whole novel view by pressing the refresh
+button at the top.
+
+It is possible to show an optional third column in the novel view, The settings are available from
+the menu button ath the top.
+
+If you click the arrow icon to the right of each item, a tooltip will pop up showing you all the
+meta data collected for that heading entry.
+
+
+Novel Outline View
+------------------
+
+When in :guilabel:`Novel Outline View` mode, the tree, editor and viewer will be replaced by a
+large table that shows the entire novel structure with all the tags and references listed. Pretty
+much all collected meta data is available here in different columns.
+
+You can select which novel root folder to display from the dropdown box, and you can select which
+columns to show or hide from the menu button. You can also rearrange the columns by drag and drop.
+The app will remember you column order and size between sessions, and for each individual project.
+
+
+Colour Themes
+-------------
+
+The default colour theme of the user interface is the default theme from the Qt library. By
+default, novelWriter is loaded with the Fusion_ style setting. (You can override this with the
+``--style=`` setting when starting novelWriter.)
+
+There is a standard dark theme provided as well, which is similar to the default Qt theme. Some
+other light and dark colour themes are also provided. You can select which one you prefer from in
+:guilabel:`Preferences` .
+
+A number of syntax highlighting themes are also available in :guilabel:`Preferences`. These are
+separate settings because there are a lot more options for syntax highlighting.
+
+.. note::
+   If you switch to dark mode on the GUI, you should also switch syntax highlighting theme to
+   match, otherwise icons may be hard to see in the editor and viewer.
+
+
+.. _a_breakdown_project:
+
+Project Layout
+==============
+
+This is a brief introduction to how you structure your writing projects. All of this will be
+covered in more detail later.
+
+The main point of novelWriter is that you are free to organise your project documents as you wish
+into subfolders or subdocuments, and split the text between these documents in whatever way suits
+you. All that matters to novelWriter is the linear order the documents appear at in the project
+tree (top to bottom). The chapters, scenes and sections of the novel are determined by the headings
+within those documents.
+
+The four heading levels (**H1** to **H4**) are treated as follows:
+
+* **H1** is used for the book title, and for partitions.
+* **H2** is used for chapter tiles.
+* **H3** is used for scene titles – optionally replaced by separators.
+* **H4** is for section titles within scenes, if such granularity is needed.
+
+The project tree will select an icon for the document based on the first heading in it.
+
+This header level structure is only taken into account for novel documents. For the project notes,
+the header levels have no structural meaning, and the user is free to do whatever they want. See
+:ref:`a_struct` and :ref:`a_notes` for more details.
+
+.. note::
+   You can add documents as child items of other documents if you wish. This is often more useful
+   than adding folders, since you anyway may want to have the chapter heading in a separate
+   document from your individual scene documents.
+
+
+.. _a_breakdown_export:
+
+Building the Manuscript
+=======================
+
+The project can at any time be assembled into a range of different formats through the
+:guilabel:`Build Novel Project` tool. Natively, novelWriter supports `Open Document`_, HTML5, and
+various flavours of Markdown.
+
+The HTML5 format is suitable for conversion by a number of other tools like Pandoc_, or for
+importing into word processors if the Open Document format isn't suitable. In addition, printing
+and printing to PDF is also possible. 
+
+You can also export the content of the project to a JSON file. This is useful if you want to write
+your own processing script in for instance Python, as the entire novel can be read into a Python
+dictionary with a couple of lines of code. The JSON file can be populated either with HTML
+formatted text, or with the raw text as typed into the novel documents. See :ref:`a_export_options`
+for more details.
+
+A number of filter options can be applied to the :guilabel:`Build Novel Project` tool, allowing you
+to make a draft manuscript, a reference document of notes, an outline based on chapter and scene
+titles with a synopsis each, and so on. See :ref:`a_export` for more details on build features and
+formats.
+
+
+.. _a_breakdown_storage:
+
+Project Storage
+===============
+
+The files of a novelWriter project are stored in a dedicated project folder. The project structure
+is kept in a file at the root of this folder called ``nwProject.nwx``. All the document files and
+associated meta data is stored in the other folders below the project folder. For more technical
+details about what all the files mean and how they're organised, see the :ref:`a_storage` section.
+
+This way of storing data was chosen for several reasons. Firstly, all the text you add to your
+project is saved directly to your project folder in separate files. Only the project structure and
+the text you are currently editing is stored in memory at any given time. Secondly, having multiple
+small files means it is very easy to sync them between computers with standard file synchronisation
+tools. Thirdly, if you use version control software to track the changes to your project, the file
+formats used for the files are well suited. Also the JSON documents have line breaks and indents,
+which makes it easier to track them with version control software.
+
+.. note::
+
+   Since novelWriter has to keep track of a bunch of files and folders when a project is open, it
+   may not run well on some virtual file systems. A file or folder must be accessible with exactly
+   the path it was saved or created with. An example where this is not the case is the way Google
+   Drive is mapped on Linux Gnome desktops using gvfs/gio.
+
+.. caution::
+
+   You should not add additional files to the project folder yourself. Nor should you manually edit
+   files within it as a general rule. If you really must manually edit the text files, e.g. with
+   some automated task you want to perform, you need to rebuild the index when you open the project
+   again.
+
+   Editing text files in the ``content`` folder is less risky as they are just plain text. Editing
+   the main project XML file, however, may make the project file unreadable and you may crash
+   novelWriter and lose project structure information and project settings.
+

docs/source/usage_format.rst

@@ -0,0 +1,248 @@
+.. _a_fmt:
+
+********************
+Formatting Your Text
+********************
+
+The novelWriter text editor is a plain text editor that uses formatting codes for setting meta data
+values and allowing for some text formatting. The syntax is based on Markdown, but novelWriter is
+*not* a Markdown editor. It supports basic formatting like emphasis (italic), strong importance
+(bold) and strikethrough text, as well as four levels of headings.
+
+In addition to formatting codes, novelWriter allows for comments, a synopsis tag, and a set of
+keyword and value sets used for tags and references. There are also some codes that apply two whole
+paragraphs. See :ref:`a_fmt_text` below for more details.
+
+
+.. _a_fmt_hlight:
+
+Syntax Highlighting
+===================
+
+The editor has a syntax highlighter feature that is meant to help you know when you've used the
+formtatting tags or other features correctly. It will change the colour and font size of your
+headings, change the text colour of emphasised text, and it can also show you where you have
+dialogue in your text.
+
+When you use the commands to set tags and references, these also change colour. Correct commands
+have a dedicated colour, and the references themselves will get a colour if they are valid. Invalid
+references will get a squiggly error line underneath. The same applies to duplicate tags.
+
+There are a number of syntax highlighter colour themes available, both for light and dark GUIs. You
+can select them for :guilabel:`Preferences`.
+
+
+.. _a_fmt_head:
+
+Headings
+========
+
+Four levels of headings are allowed. For project notes, they are free to be used as you see fit.
+That is, novelWriter doesn't assign the different headings any particular meaning. However, for
+novel documents they indicate the structural level of the novel and must be used correctly to
+produce the intended result. See :ref:`a_struct_heads` for more details.
+
+``# Title Text``
+   Heading level one. For novel documents, the header level indicates the start of a new partition.
+
+``## Title Text``
+   Heading level two. For novel documents, the header level indicates the start of a new chapter.
+   Chapter numbers can be inserted automatically when building the manuscript.
+
+``### Title Text``
+   Heading level three. For novel documents, the header level indicates the start of a new scene.
+   Scene numbers or scene separators can be inserted automatically when building the manuscript,
+   so you can use the title field as a working title for your scenes if you wish.
+
+``#### Title Text``
+   Heading level four. For novel documents, the header level indicates the start of a new section.
+   Section titles can be replaced by separators or removed completely when building the manuscript.
+
+For headers level one and two, adding a ``!`` modifies the behaviour of the heading:
+
+``#! Title Text``
+   This tells the build tool that the level one heading is intended to be used for the novel's
+   main title, like for instance on the front page. When building the manuscript, this will use a
+   different styling and will exclude the title from for instance a Table of Contents in Libre
+   Office.
+
+``##! Title Text``
+   This tells the build tool to not assign a chapter number to this chapter title if automatic
+   chapter numbers are being used. Such titles are useful for a prologue for instance. See
+   :ref:`a_struct_heads_unnum` for more details.
+
+.. note::
+   The space after the ``#`` or ``!`` character is mandatory. The syntax highlighter will change
+   colour and font size when the heading is correctly formatted.
+
+
+.. _a_fmt_text:
+
+Text Paragraphs
+===============
+
+A text paragraph is indicated by a blank line. That is, you need two line breaks to separate two
+fragments of text into two paragraphs. Single line breaks are treated as line breaks within a
+paragraph.
+
+In addition, the editor supports a few additional types of whitespaces:
+
+* A non-breaking space can be inserted with :kbd:`Ctrl`:kbd:`K`, :kbd:`Space`.
+* Thin spaces are also supported, and can be inserted with :kbd:`Ctrl`:kbd:`K`, 
+  :kbd:`Shift`:kbd:`Space`.
+* Non-breaking thin space can be inserted  with :kbd:`Ctrl`:kbd:`K`, :kbd:`Ctrl`:kbd:`Space`.
+
+These are all insert features, and the :guilabel:`Insert` menu has more. They are also listed
+in :ref:`a_kb_ins`.
+
+Non-breaking spaces are highlighted by the syntax highlighter with an alternate coloured
+background, depending on the selected theme.
+
+.. tip::
+   Non-breaking spaces are for instance the correct type of space to separate a number from its
+   unit. Generally, non-breaking spaces are used to prevent line wrapping algorithms from adding
+   line breaks where they shouldn't.
+
+
+.. _a_fmt_emph:
+
+Text Emphasis
+=============
+
+A minimal set of text emphasis styles are supported.
+
+``_text_``
+   The text is rendered as emphasised text (italicised).
+
+``**text**``
+   The text is rendered as strongly important text (bold).
+
+``~~text~~``
+   Strikethrough text.
+
+In markdown guides it is often recommended to differentiate between strong importance and emphasis
+by using ``**`` for strong and ``_`` for emphasis, although Markdown generally also supports ``__``
+for strong and ``*`` for emphasis. However, since the differentiation makes the highlighting and
+conversion significantly simpler and faster, in novelWriter this is a rule, not just a
+recommendation.
+
+In addition, the following rules apply:
+
+1. The emphasis and strikethrough formatting tags do not allow spaces between the words and the tag
+   itself. That is, ``**text**`` is valid, ``**text **`` is not.
+2. More generally, the delimiters must be on the outer edge of words. That is, ``some **text in
+   bold** here`` is valid, ``some** text in bold** here`` is not.
+3. If using both ``**`` and ``_`` to wrap the same text, the underscore must be the inner wrapper.
+   This is due to the underscore also being a valid word character, so if they are on the outside,
+   they violate rule 2.
+4. Text emphasis does not span past line breaks. If you need to add emphasis to multiple lines or
+   paragraphs, you must apply it to each of them in turn.
+
+
+.. _a_fmt_comm:
+
+Comments and Synopsis
+=====================
+
+In addition to these standard Markdown features, novelWriter also allows for comments in documents.
+The text of a comment is ignored by the word counter. The text can also be filtered out when
+building the manuscript or viewing the document.
+
+If the first word of a comment is ``Synopsis:`` (with the colon included), the comment is treated
+specially and will show up in the :ref:`a_ui_outline` in a dedicated column. The word ``synopsis``
+is not case sensitive. If it is correctly formatted, the syntax highlighter will indicate this by
+altering the colour of the word.
+
+``% text...``
+   This is a comment. The text is not renderred by default (this can be overridden), seen in the
+   document viewer, or counted towards word counts.
+
+``% Synopsis: text...``
+   This is a synopsis comment. It is generally treated in the same way as a regular comment, except
+   that it is also captured by the indexing algorithm and displayed in the :ref:`a_ui_outline`. It
+   can also be filtered separately when building the project to for instance generate an outline
+   document of the whole project.
+
+.. note::
+   Only one comment can be flagged as a synopsis comment for each heading. If multiple comments are
+   flagged as synopsis comments, the last one will be used and the rest ignored.
+
+
+.. _a_fmt_tags:
+
+Tags and References
+===================
+
+The document editor supports a set of keywords used for setting tags, and making references between
+documents. The tag can be set once per section defined by a heading. Setting it multiple times
+under the same heading will just override the previous setting. References can be set anywhere
+within a section, and are collected according to their category.
+
+``@keyword: value``
+   A keyword argument followed by a value, or a comma separated list of values.
+
+The available tag and reference keywords are listed in the :ref:`a_struct_tags` section. They can
+also be inserted at the cursor position in the editor via the :guilabel:`Insert` menu.
+
+
+.. _a_fmt_align:
+
+Paragraph Alignment and Indentation
+===================================
+
+All documents have the text by default aligned to the left or justified, depending on your
+Preferences.
+
+You can override the default text alignment on individual paragraphs by specifying alignment tags.
+These tags are double angle brackets. Either ``>>`` or ``<<``. You put them either before or after
+the paragraph, and they will "push" the text towards the edge the brackets point towards. This
+should be fairly intuitive.
+
+Indentation uses a similar syntax. But here you use a single ``>`` or ``<`` to push the text away
+from the edge.
+
+Examples:
+
+.. csv-table:: Text Alignment and Indentation
+   :header: "Syntax", "Description"
+   :widths: 40, 60
+   :class: "tight-table"
+
+   "``>> Right aligned text``",        "The text paragraph is right-aligned."
+   "``Left aligned text <<``",         "The text paragraph is left-aligned."
+   "``>> Centred text <<``",           "The text paragraph is centred."
+   "``> Left indented text``",         "The text has an increased left margin."
+   "``Right indented text <``",        "The text has an increased right margin."
+   "``> Left/right indented text <``", "The text has an both margins increased."
+
+.. note::
+   The text editor will not show the alignment and indentation live. But the viewer will show them
+   when you open the document there. It will of course also be reflected in the document generated
+   from the build tool as long as the format supports paragraph alignment.
+
+
+.. _a_fmt_break:
+
+Vertical Space and Page Breaks
+==============================
+
+Adding more than one line break between paragraphs will *not* increase the space between those
+paragraphs when building the project. To add additional space between paragraphs, add the text
+``[VSPACE]`` on a line of its own, and the build tool will insert a blank paragraph in its place.
+
+If you need multiple blank paragraphs just add a colon and a number to the above code. For
+instance, writing ``[VSPACE:3]`` will insert three blank paragraphs.
+
+Normally, the build tool will insert a page break before all headers of level one and for all
+headers of level two for novel documents, i.e. chapters, but not for project notes.
+
+If you need to add a page break somewhere else, put the text ``[NEW PAGE]`` on a line by itself
+before the text you wish to start on a new page.
+
+Page breaks are automatically added to partition, chapter and unnumbered chapter headers of novel
+documents. If you want such breaks for scenes and sections, you must add them manually.
+
+.. note::
+   The page break code is applied to the text that follows it. It adds a "page break before" mark
+   to the text when exporting to HTML or Open Document. This means that a ``[NEW PAGE]`` which has
+   no text following it, it will not result in a page break.

docs/source/usage_interface.rst

@@ -1,11 +1,13 @@
 .. _a_ui:
 
-**************
-User Interface
-**************
+******************
+The User Interface
+******************
 
-The user interface is kept as simple as possible to avoid distractions when writing. This page
-lists all the main GUI elements, and explains what they do.
+.. _Compose Key: https://en.wikipedia.org/wiki/Compose_key
+
+This sections covers in more detail what all the information on the user interface is for, and how
+you can organise your project, and how you use the editor, viewer and outline panel.
 
 
 .. _a_ui_tree:
@@ -14,35 +16,50 @@ The Project Tree
 ================
 
 The main window contains a project tree in the left-most panel. It shows the entire structure of
-the project. It has four columns:
+the project, and has four columns:
 
-:guilabel:`Label`
-   The first column shows the item icon and its label. The labels can be edited from the
-   :guilabel:`Project` menu, or by pressing :kbd:`F2` or :kbd:`Ctrl`:kbd:`E`. The label is not the
-   same as the title you set inside the document, but it will appear in the header above the
-   document text itself.
+**Column 1**
+   The first column shows the icon and label of each folder, document, or note in your project. The
+   label is not the same as the title you set inside the document. However, the document's label
+   will appear in the header above the document text itself so you know where in the project an
+   open document belongs. The icon is selected based on the type of item, and for novel documents,
+   the level of the first header in the document text.
 
-:guilabel:`Words`
+**Column 2**
    The second column shows the word count of the document, or the sum of words of the child items
-   if it is a folder. If the counts seem incorrect, they can be updated by rebuilding the project
-   index from the :guilabel:`Tools` menu, or by pressing :kbd:`F9`.
+   for folders and documents with subdocuments. If the counts seem incorrect, they can be updated
+   by rebuilding the project index from the :guilabel:`Tools` menu, or by pressing :kbd:`F9`.
 
-:guilabel:`Inc`
-   The third column indicates whether the document is included in the final project build or not.
-   You may want to filter out documents that you no longer want to keep in the final manuscript,
-   but want to keep in the project for reference.
+**Column 3**
+   The third column indicates whether the document is considered active or inactive in the project.
+   You can use this flag to indicate that a document is still in the project, but should not be
+   considered an active part of it. When you run the :guilabel:`Build Novel Project` tool, you can
+   filter based on this flag. You can change this value from the context menu.
 
-:guilabel:`Flags`
-   The fourth column shows various meta data flags for the item. The first is an icon indicating
-   the importance or status of the document. These are colour coded status levels that you control
-   and define yourself. They can be changed in :guilabel:`Project Settings` from the
-   :guilabel:`Project` menu. The first character after the icon indicates the class of the item,
-   that is ``N`` for **Novel**, ``C`` for **Character**, etc (see :ref:`a_struct_tags`). The
-   characters after the dot indicate the document layout type (see :ref:`a_proj_roots`).
+**Column 4**
+   The fourth column shows the user-defined status or importance labels you've assigned to each
+   project item. See :ref:`a_ui_tree_status` for more details. You can change these labels from the
+   context menu.
 
 Right-clicking an item in the project tree will open a context menu under the cursor, displaying
 a selection of actions that can be performed on the selected item.
 
+At the top of the tree, you will find a set of buttons.
+
+* The first button is a quick links button that will show you a dropdown menu of all the root 
+  folders in your project. Selecting one will move to that position in the tree. You can also
+  activate this menu by pressing :kbd:`Ctrl`:kbd:`L`.
+* The next two buttons can be used to move items up and down in the project tree. This is the only 
+  way to move root folders.
+* The next button opens a dropdown menu for adding new items to the tree. This includes root 
+  folders. You can also activate this dropdown menu by pressing :kbd:`Ctrl`:kbd:`N`.
+* The last button is a menu of further actions on the entire project tree.
+
+.. tip::
+   Under the :guilabel:`Transform` submenu in the context menu of an item, you will find several
+   options on how to change a document or folder. This includes changing between document and note,
+   splitting them into multiple documents, or merging child items into a single document.
+
 Below the project tree you will find a small details panel showing the full information of the
 currently selected item. This panel also includes the latest paragraph and character counts in
 addition to the word count.
@@ -54,13 +71,15 @@ The Novel Tree
 --------------
 
 An alternative way to view the project structure is the novel tree. You can switch to this view by
-selecting the :guilabel:`Novel` tab under the project tree. This view is a simplified version of
-the view in the :guilabel:`Outline`. It is convenient when you want to browse the structure of the
-story itself rather than the document files.
+selecting the :guilabel:`Novel Tree View` button in the sidebar. This view is a simplified version
+of the view in the :guilabel:`Outline`. It is convenient when you want to browse the structure of
+the story itself rather than the document files.
 
 .. note::
-   You cannot reorganise the entries in the novel tree as that would imply restructuring the
-   content of the document files.
+   You cannot reorganise the entries in the novel tree, or add any new documents, as that would
+   imply restructuring the content of the document files. Any editing must be done in the project
+   tree. However, you can add new headings to existing documents, or change references, which will
+   be updated in this view.
 
 
 .. _a_ui_tree_status:
@@ -69,14 +88,16 @@ Document Importance and Status
 ------------------------------
 
 Each document or folder in your project can have either a "Status" or "Importance" flag set. These
-are flags that you control and define in their respective tabs in :guilabel:`Project Settings`. The
-"Status" flag is intended to tag a Novel document as for instance a draft or as completed, and the
-"Importance" flag is intended to tag character notes, or other notes, as for instance a main, major
-or minor character.
+are flags that you control and define yourself. The app doesn't do anything with them at all. To
+modify the labels, go to their respective tabs in :guilabel:`Project Settings`.
+
+The "Status" flag is intended to tag a Novel document as for instance a draft or as completed, and
+the "Importance" flag is intended to tag character notes, or other notes, as for instance a main,
+major or minor character.
 
 Whether a document uses a "Status" or "Importance" flag depends on which root folder it lives in.
 If it's in the :guilabel:`Novel` folder, it uses the "Status" flag, otherwise it uses an
-"Importance" flag. Some folders, like :guilabel:`Trash` and :guilabel:`Outtakes` allow both.
+"Importance" flag. Some folders, like :guilabel:`Trash` and :guilabel:`Archive` allow both.
 
 
 .. _a_ui_tree_dnd:
@@ -84,25 +105,24 @@ If it's in the :guilabel:`Novel` folder, it uses the "Status" flag, otherwise it
 Project Tree Drag & Drop
 ------------------------
 
-The project tree allows drag & drop to a certain extent. This feature is primarily intended for
-rearranging the order of your documents within each root folder, and has only limited support for
-moving documents elsewhere in the project tree. In general, bulk actions are not allowed. This is
-deliberate to avoid accidentally messing up your project. If you make a mistake, the last move
-action can be undone by pressing :kbd:`Ctrl`:kbd:`Shift`:kbd:`Z`.
+The project tree allows drag & drop to a certain extent to allow you to reorder your documents and
+folders. Moving a document in the project tree will affect the text's position when you assemble
+your manuscript in the build tool.
 
-Documents and their folders can be rearranged freely within their root folders. Novel documents
-cannot be moved out of the :guilabel:`Novel` folder, except to :guilabel:`Trash` and the
-:guilabel:`Outtakes` folders. Notes can be moved freely between all root folders, but keep in mind
-that if you move a note into a :guilabel:`Novel`, its "Importance" setting will be reset to the
-default "Status" setting. See :ref:`a_ui_tree_status`.
+Drag & drop has only limited support for moving documents. In general, bulk actions are not
+allowed. This is deliberate to avoid accidentally messing up your project. If you make a mistake,
+the last move action can be undone by pressing :kbd:`Ctrl`:kbd:`Shift`:kbd:`Z`.
 
-Folders cannot be moved at all outside their root tree. Neither can a folder containing documents
-be deleted. You must first delete the containing documents.
+Documents and their folders can be rearranged freely within their root folders. If you move a Novel
+documents out of a Novel folder, it will be converted to a project note. Notes can be moved freely
+between all root folders, but keep in mind that if you move a note into a :guilabel:`Novel` root
+folder, its "Importance" setting will be switched with a "Status" setting. See
+:ref:`a_ui_tree_status`. The old value will not be overwritten though, and should be restored if
+you move it back at some point.
 
-Root folders in the project tree cannot be dragged and dropped at all. If you want to reorder them,
-you can move them up or down with respect to eachother from the :guilabel:`Project` menu, the
-right-click context menu, or by pressing :kbd:`Ctrl`:kbd:`Shift` and the :kbd:`Up` or :kbd:`Down`
-key.
+Root folders in the project tree cannot be dragged & dropped at all. If you want to reorder them,
+you can move them up or down with respect to eachother from the arrow buttons at the top of the
+project tree, or by pressing :kbd:`Ctrl`:kbd:`Shift` and the :kbd:`Up` or :kbd:`Down` key.
 
 
 .. _a_ui_edit:
@@ -112,31 +132,41 @@ Editing and Viewing Documents
 
 To edit a document, double-click it in the project tree, or press the :kbd:`Return` key while
 having it selected. This will open the document in the document editor. The editor uses a
-simplified markdown format. The format is described in the :ref:`a_ui_md` section below. The editor
-has a maximise button (toggles the :guilabel:`Focus Mode`) and a close button in the top-right
-corner.
+Markdown-like syntax for some features, and a novelWriter-specific syntax for others. The syntax
+format is described in the :ref:`a_fmt` section.
+
+The editor has a maximise button (toggles the :guilabel:`Focus Mode`) and a close button in the
+top–right corner. On the top–left side you will find an edit button that opens the
+:guilabel:`Item Label` dialog for the currently open document, and a search button to open the
+search dialog.
 
 Any document in the project tree can also be viewed in parallel in a right hand side document
 viewer. To view a document, press :kbd:`Ctrl`:kbd:`R`, or select :guilabel:`View Document` in the
-menu. If you have a middle mouse button, middle-clicking on the document will also open it in the
-viewer. The document viewed does not have to be the same document currently being edited. However,
-If you *are* viewing the same document, pressing :kbd:`Ctrl`:kbd:`R` again will update the document
-with your latest changes. You can also press the reload button in the top-right corner of the view
-panel next to the close button to achieve the same thing.
+menu or context menu. If you have a middle mouse button, middle-clicking on the document will also
+open it in the viewer.
+
+The document viewed does not have to be the same document as currently being edited. However, If
+you *are* viewing the same document, pressing :kbd:`Ctrl`:kbd:`R` again will update the document
+with your latest changes. You can also press the reload button in the top–right corner of the view
+panel, next to the close button, to achieve the same thing.
 
 Both the document editor and viewer will show the label of the document in the header at the top of
 the edit or view panel. Optionally, the full project path to the document can be shown. This can be
-set in :guilabel:`Preferences` from the :guilabel:`Tools` menu. Clicking on the document title bar
-will select and reveal its location in the project tree, making it easier to locate in a large
-project.
+set in :guilabel:`Preferences`.
+
+.. tip::
+   Clicking on the document title bar will select the document in the project tree and reveal its
+   location, making it easier to locate in a large project.
 
 Any tag reference in the editor can be opened in the viewer by moving the cursor to the label and
 pressing :kbd:`Ctrl`:kbd:`Return`. You can also control-click them with your mouse. In the viewer,
 the references become clickable links. Clicking them will replace the content of the viewer with
-the content of the document the reference points to. The document viewer keeps a history of viewed
-documents, which you can navigate with the arrow buttons in the top-left corner of the viewer. If
-your mouse has back and forward navigation buttons, these can be used as well. They work just like
-the backward and forward features in a browser.
+the content of the document the reference points to.
+
+The document viewer keeps a history of viewed documents, which you can navigate with the arrow
+buttons in the top–left corner of the viewer. If your mouse has backward and forward navigation
+buttons, these can be used as well. They work just like the backward and forward features in a
+browser.
 
 At the bottom of the view panel there is a :guilabel:`References` panel. (If it is hidden, click
 the icon to reveal it.) This panel will show links to all documents referring back to the one
@@ -152,6 +182,29 @@ convenient if you want to quickly look through all documents in the list in the
    pressing :kbd:`F9`.
 
 
+.. _a_ui_edit_search:
+
+Search & Replace
+----------------
+
+The document editor has a search and replace tool that can be activated with :kbd:`Ctrl`:kbd:`F`
+for search mode or :kbd:`Ctrl`:kbd:`H` for search and replace mode.
+
+Pressing :kbd:`Return` while in the search box will search for the next occurrence of the word, and
+:kbd:`Shift`:kbd:`Return` for the previous. Pressing :kbd:`Return` in the replace box, will replace
+the highlighted text and move to the next result.
+
+There are a number of settings for the search tool available as toggle switches above the search
+box. They allow you to search for, in order: matched case only, whole word results only, search
+using regular expressions, loop search when reaching the end of the document, and move to the next
+document when reaching the end. There is also a switch that will try to match the case of the word
+when the replacement is made. That is, it will try to keep the word upper, lower, or capitalised to
+match the word being replaced.
+
+The regular expression search is somewhat dependant on which version of Qt your system has. If you
+have Qt 5.13 or higher, there is better support for unicode symbols in the search.
+
+
 .. _a_ui_edit_auto:
 
 Auto-Replace as You Type
@@ -163,16 +216,14 @@ you wish.
 
 .. tip::
    If you don't like auto-replacement, all symbols inserted by this feature are also available in
-   the :guilabel:`Insert` menu, and via convenient :ref:`a_ui_shortcuts_ins`. You may also be using
-   a `Compose Key`_ setup, which means you may not need the auto-replace feature.
-
-.. _Compose Key: https://en.wikipedia.org/wiki/Compose_key
+   the :guilabel:`Insert` menu, and via convenient :ref:`a_kb_ins`. You may also be using a
+   `Compose Key`_ setup, which means you may not need the auto-replace feature.
 
 The editor is able to replace two and three hyphens with short and long dashes, triple points with
 ellipsis, and replace straight single and double quotes with user-defined quote symbols. It will
 also try to determine whether to use the opening or closing symbol, although this feature isn't
 always accurate. Especially distinguishing between closing single quote and apostrophe can be
-tricky for languages that use the same symbol for these.
+tricky for languages that use the same symbol for these, like English does.
 
 .. tip::
    If the auto-replace feature changes a symbol when you did not want it to change, pressing
@@ -180,187 +231,31 @@ tricky for languages that use the same symbol for these.
    character you typed.
 
 
-.. _a_ui_md:
-
-Markdown Format
-===============
-
-The document editor uses a simplified markdown format. That is, it supports basic formatting like
-emphasis (italic), strong importance (bold) and strikethrough text, as well as four levels of
-headings.
-
-Some non-standard markdown features have been added. For instance, novelWriter allows for comments,
-a synopsis tag, and a set of keyword and value sets used for tags and references.
-
-
-.. _a_ui_md_head:
-
-Headings
---------
-
-Four levels of headings are allowed. For documents of layout ``Note``, they are free to be used as
-you see fit, but for all other layouts used for the novel text itself, they indicate the structural
-level of the novel. See :ref:`a_struct_heads` for more details.
-
-``# Title``
-   Heading level one. If the document is a novel file, the header level indicates the start of a
-   new partition. This heading level can also be used for the title page's novel title.
-
-``## Title``
-   Heading level two. If the document is a novel file, the header level indicates the start of a
-   new chapter. Chapter numbers can be inserted automatically when exporting the manuscript.
-
-``### Title``
-   Heading level three. If the document is a novel file, the header level indicates the start of a
-   new scene. Scene numbers or scene separators can be inserted automatically when exporting the
-   manuscript, so you can use the title field as a working title for your scenes if you wish.
-
-``#### Title``
-   Heading level four. If the document is a novel file, the header level indicates the start of a
-   new section. Section titles can be replaced by separators or removed when exporting the
-   manuscript, so you can use the title field as a working title for your sections if you wish.
-
-.. note::
-   The space after the ``#`` characters is mandatory. The syntax highlighter will change colour and
-   font size when the heading is correctly formatted.
-
-.. tip::
-   If you do use the automatic numbering feature for exports, you can tell the export tool to skip
-   assigning a number to a specific chapter by adding a ``*`` as the first character of the title
-   itself. See :ref:`a_struct_heads_unnum` for more details.
-
-
-.. _a_ui_md_emph:
-
-Text Emphasis
--------------
-
-A minimal set of text emphasis styles are supported.
-
-``_text_``
-   The text is rendered as emphasised text (italicised).
-
-``**text**``
-   The text is rendered as strongly important text (bold).
-
-``~~text~~``
-   Strikethrough text.
-
-In markdown guides it is often recommended to differentiate between strong importance and emphasis
-by using ``**`` for strong and ``_`` for emphasis, although markdown generally also supports ``__``
-for strong and ``*`` for emphasis. However, since the differentiation makes the highlighting and
-conversion significantly simpler and faster, in novelWriter this is a rule, not just a
-recommendation.
-
-In addition, the following rules apply:
-
-1. The emphasis and strikethrough formatting tags do not allow spaces between the words and the tag
-   itself. That is, ``**text**`` is valid, ``**text **`` is not.
-2. More generally, the delimiters must be on the outer edge of words. That is, ``some **text in
-   bold** here`` is valid, ``some** text in bold** here`` is not.
-3. If using both ``**`` and ``_`` to wrap the same text, the underscore must be the inner wrapper.
-   This is due to the underscore also being a valid word character, so if they are on the outside,
-   they violate rule 2.
-4. Text emphasis does not span past line breaks. If you need to add emphasis to multiple lines or
-   paragraphs, you must apply it to each of them in turn.
-
-
-.. _a_ui_md_comm:
-
-Comments and Synopsis
----------------------
-
-In addition to these standard markdown features, novelWriter also allows for comments in documents.
-The text of a comment is ignored by the word counter. The text can also be filtered out when
-exporting or viewing the document.
-
-If the first word of a comment is ``Synopsis:`` (with the colon included), the comment is treated
-specially and will show up in the :ref:`a_ui_outline` in a dedicated column. The word ``synopsis``
-is not case sensitive. If it is correctly formatted, the syntax highlighter will indicate this by
-altering the colour of the word.
-
-``% text...``
-   This is a comment. The text is not exported by default (this can be overridden), seen in the
-   document viewer, or counted towards word counts.
-
-``% Synopsis: text...``
-   This is a synopsis comment. It is generally treated in the same way as a regular comment, except
-   that it is also captured by the indexing algorithm and displayed in the :ref:`a_ui_outline`. It
-   can also be filtered separately when exporting the project to for instance generate an outline
-   document of the whole project.
-
-.. note::
-   Only one comment can be flagged as a synopsis comment for each heading. If multiple comments are
-   flagged as synopsis comments, the last one will be used and the rest ignored.
-
-
-.. _a_ui_md_tags:
-
-Tags and References
--------------------
-
-The document editor supports a minimal set of keywords used for setting tags, and making references
-between documents. The tags and references can be set once per section defined by a heading. Using
-them multiple times under the same heading will just override the previous setting.
-
-``@keyword: value``
-   A keyword argument followed by a value, or a comma separated list of values.
-
-The available tag and reference keywords are listed in the :ref:`a_struct_tags` section. They can
-also be inserted at the cursor position in the editor via the :guilabel:`Insert` menu.
-
-
-.. _a_ui_md_add:
-
-Additional Markdown and Non-Standard Features
----------------------------------------------
-
-The editor and viewer also support markdown standard hard line breaks, and preserve non-breaking
-spaces if running with Qt 5.9 or higher. For older versions, the non-breaking spaces are lost when
-the document is saved. This is unfortunately hard-coded into the Qt text editor.
-
-* A hard line break can be achieved by leaving two or more spaces at the end of the line. This is
-  standard markdown syntax. Alternatively, the user can press :kbd:`Ctrl`:kbd:`K`, :kbd:`Return` to
-  insert this type of line break.
-* A non-breaking space can be inserted with :kbd:`Ctrl`:kbd:`K`, :kbd:`Space`.
-* Thin spaces are also supported, and can be inserted with :kbd:`Ctrl`:kbd:`K`,
-  :kbd:`Shift`:kbd:`Space`.
-* Non-breaking thin space can be inserted  with :kbd:`Ctrl`:kbd:`K`, :kbd:`Ctrl`:kbd:`Space`.
-
-These are all insert features, and the :guilabel:`Insert` menu has more. They are also listed
-in :ref:`a_ui_shortcuts_ins`.
-
-Both hard line breaks and non-breaking spaces are highlighted by the syntax highlighter as an
-alternate coloured background, depending on the selected theme.
-
-.. tip::
-   Non-breaking spaces are the correct type of space to separate a number from its unit. Generally,
-   it prevents the line wrapping algorithms from adding line breaks where it shouldn't.
-
-
 .. _a_ui_outline:
 
 Project Outline View
 ====================
 
-The project's Outline view is available as the second tab on the right hand side of the main window
-labelled :guilabel:`Outline`. The outline provides an overview of the novel structure, displaying a
-tree hierarchy of the elements of the novel, that is, the level 1 to 4 headings representing
-partitions, chapters, scenes and sections.
+The project's Outline view is available as another view option from the views bar. The outline
+provides an overview of the novel structure, displaying a tree hierarchy of the elements of the
+novel, that is, the level 1 to 4 headings representing partitions, chapters, scenes and sections.
 
 The document containing the heading can also be displayed as a separate column, as well as the line
 number where it occurs. Double-clicking an entry will open the corresponding document in the
 editor.
 
+You can select which novel folder to display from the dropdown menu. You can optionally also choose
+to show a combination of all novel folders.
+
 .. note::
    Since the internal structure of the novel does not depend directly on the folder and document
    structure of the project tree, these will not necessarily look the same, depending on how you
    choose to organise your documents. See the :ref:`a_struct` page for more details.
 
 Various meta data and information extracted from tags can be displayed in columns in the outline.
-A default set of such columns is visible, but you can turn on or off more columns by right clicking
-the header and selecting the columns you want to show. The order of the columns can also be
-rearranged by dragging them to a different position.
+A default set of such columns is visible, but you can turn on or off more columns from the menu
+button in the toolbar. The order of the columns can also be rearranged by dragging them to a
+different position. You column settings are saved between sessions on a per-project basis.
 
 .. note::
    The :guilabel:`Title` column cannot be disabled or moved.
@@ -369,146 +264,8 @@ The information viewed in the outline is based on the project's main index. Whil
 its best to keep the index up to date when contents change, you can always rebuild it manually by
 pressing :kbd:`F9` if something isn't right.
 
-The outline view itself can be regenerated by pressing :kbd:`F10`. You can also enable automatic
-updating in the :guilabel:`Tools` menu, which will trigger an update whenever the index is updated
-and the :guilabel:`Outline` tab is active. You may want to disable this feature if your project is
-very large,
+The outline view itself can be regenerated by pressing the refresh button. By default, the content
+is refreshed each time you switch to this view.
 
 The :guilabel:`Synopsis` column of the outline view takes its information from a specially
-formatted comment. See :ref:`a_ui_md_comm`.
-
-
-.. _a_ui_shortcuts:
-
-Keyboard Shortcuts
-==================
-
-Most features are available as keyboard shortcuts. These are as follows:
-
-.. csv-table:: Keyboard Shortcuts
-   :header: "Shortcut", "Description"
-   :widths: 30, 70
-   :class: "tight-table"
-
-   ":kbd:`Alt`:kbd:`1`",                 "Switch focus to the project tree."
-   ":kbd:`Alt`:kbd:`2`",                 "Switch focus to document editor."
-   ":kbd:`Alt`:kbd:`3`",                 "Switch focus to document viewer."
-   ":kbd:`Alt`:kbd:`4`",                 "Switch focus to outline view."
-   ":kbd:`Alt`:kbd:`Left`",              "Move backward in the view history of the document viewer."
-   ":kbd:`Alt`:kbd:`Right`",             "Move forward in the view history of the document viewer."
-   ":kbd:`Ctrl`:kbd:`.`",                "Open menu to correct word under cursor."
-   ":kbd:`Ctrl`:kbd:`,`",                "Open the :guilabel:`Preferences` dialog."
-   ":kbd:`Ctrl`:kbd:`/`",                "Change block format to comment."
-   ":kbd:`Ctrl`:kbd:`0`",                "Remove block formatting for block under cursor."
-   ":kbd:`Ctrl`:kbd:`1`",                "Change block format to header level 1."
-   ":kbd:`Ctrl`:kbd:`2`",                "Change block format to header level 2."
-   ":kbd:`Ctrl`:kbd:`3`",                "Change block format to header level 3."
-   ":kbd:`Ctrl`:kbd:`4`",                "Change block format to header level 4."
-   ":kbd:`Ctrl`:kbd:`A`",                "Select all text in the document."
-   ":kbd:`Ctrl`:kbd:`B`",                "Format selected text, or word under cursor, with strong emphasis (bold)."
-   ":kbd:`Ctrl`:kbd:`C`",                "Copy selected text to clipboard."
-   ":kbd:`Ctrl`:kbd:`D`",                "Strikethrough selected text, or word under cursor."
-   ":kbd:`Ctrl`:kbd:`E`",                "If in the project tree, edit a document or folder settings. (Same as :kbd:`F2`.)"
-   ":kbd:`Ctrl`:kbd:`F`",                "Open the search bar and search for the selected word, if any is selected."
-   ":kbd:`Ctrl`:kbd:`G`",                "Find next occurrence of search word in current document. (Same as :kbd:`F3`.)"
-   ":kbd:`Ctrl`:kbd:`H`",                "Open the search and replace bar and search for the selected word, if any is selected. (On Mac, this is :kbd:`Cmd`:kbd:`=`.)"
-   ":kbd:`Ctrl`:kbd:`I`",                "Format selected text, or word under cursor, with emphasis (italic)."
-   ":kbd:`Ctrl`:kbd:`K`",                "Activate the insert commands. The commands are listed in :ref:`a_ui_shortcuts_ins`."
-   ":kbd:`Ctrl`:kbd:`N`",                "Create new document."
-   ":kbd:`Ctrl`:kbd:`O`",                "Open selected document."
-   ":kbd:`Ctrl`:kbd:`Q`",                "Exit novelWriter."
-   ":kbd:`Ctrl`:kbd:`R`",                "If in the project tree, open a document for viewing. If the editor has focus, open current document for viewing."
-   ":kbd:`Ctrl`:kbd:`S`",                "Save the current document in the document editor."
-   ":kbd:`Ctrl`:kbd:`V`",                "Paste text from clipboard to cursor position."
-   ":kbd:`Ctrl`:kbd:`W`",                "Close the current document in the document editor."
-   ":kbd:`Ctrl`:kbd:`X`",                "Cut selected text to clipboard."
-   ":kbd:`Ctrl`:kbd:`Y`",                "Redo latest undo."
-   ":kbd:`Ctrl`:kbd:`Z`",                "Undo latest changes."
-   ":kbd:`Ctrl`:kbd:`F7`",               "Toggle spell checking."
-   ":kbd:`Ctrl`:kbd:`F10`",              "Toggle automatic updating of project outline."
-   ":kbd:`Ctrl`:kbd:`Up`",               "Move item one step up in the project tree."
-   ":kbd:`Ctrl`:kbd:`Down`",             "Move item one step down in the project tree."
-   ":kbd:`Ctrl`:kbd:`Del`",              "Delete next word in editor."
-   ":kbd:`Ctrl`:kbd:`Backspace`",        "Delete previous word in editor."
-   ":kbd:`Ctrl`:kbd:`'`",                "Wrap selected text, or word under cursor, in single quotes."
-   ":kbd:`Ctrl`:kbd:`""`",               "Wrap selected text, or word under cursor, in double quotes."
-   ":kbd:`Ctrl`:kbd:`Enter`",            "Open the tag or reference under the cursor in the Viewer."
-   ":kbd:`Ctrl`:kbd:`Shift`:kbd:`,`",    "Open the :guilabel:`Project Settings` dialog."
-   ":kbd:`Ctrl`:kbd:`Shift`:kbd:`/`",    "Remove block formatting for block under cursor."
-   ":kbd:`Ctrl`:kbd:`Shift`:kbd:`1`",    "Replace occurrence of search word in current document, and search for next occurrence."
-   ":kbd:`Ctrl`:kbd:`Shift`:kbd:`A`",    "Select all text in current paragraph."
-   ":kbd:`Ctrl`:kbd:`Shift`:kbd:`G`",    "Find previous occurrence of search word in current document. (Same as :kbd:`Shift`:kbd:`F3`.)"
-   ":kbd:`Ctrl`:kbd:`Shift`:kbd:`I`",    "Import text to the current document from a text file."
-   ":kbd:`Ctrl`:kbd:`Shift`:kbd:`N`",    "Create new folder."
-   ":kbd:`Ctrl`:kbd:`Shift`:kbd:`O`",    "Open a project."
-   ":kbd:`Ctrl`:kbd:`Shift`:kbd:`R`",    "Close the document viewer."
-   ":kbd:`Ctrl`:kbd:`Shift`:kbd:`S`",    "Save the current project."
-   ":kbd:`Ctrl`:kbd:`Shift`:kbd:`W`",    "Close the current project."
-   ":kbd:`Ctrl`:kbd:`Shift`:kbd:`Z`",    "Undo move of project tree item."
-   ":kbd:`Ctrl`:kbd:`Shift`:kbd:`Del`",  "If in the project tree, move a document to trash, or delete a folder."
-   ":kbd:`F1`",                          "Open the documentation. This will either open the Qt Assistant, if available, or send you to the documentation website."
-   ":kbd:`F2`",                          "If in the project tree, edit a document or folder settings. (Same as :kbd:`Ctrl`:kbd:`E`)"
-   ":kbd:`F3`",                          "Find next occurrence of search word in current document. (Same as :kbd:`Ctrl`:kbd:`G`)"
-   ":kbd:`F5`",                          "Open the :guilabel:`Build Novel Project` dialog."
-   ":kbd:`F6`",                          "Open the :guilabel:`Writing Statistics` dialog."
-   ":kbd:`F7`",                          "Re-run spell checker."
-   ":kbd:`F8`",                          "Activate :guilabel:`Focus Mode`, hiding the project tree and document viewer."
-   ":kbd:`F9`",                          "Re-build the project index."
-   ":kbd:`F10`",                         "Re-build the project outline."
-   ":kbd:`F11`",                         "Activate full screen mode."
-   ":kbd:`Shift`:kbd:`F1`",              "Open the online documentation in the system default browser."
-   ":kbd:`Shift`:kbd:`F3`",              "Find previous occurrence of search word in current document. (Same as :kbd:`Ctrl`:kbd:`Shift`:kbd:`G`.)"
-   ":kbd:`Shift`:kbd:`F6`",              "Open the :guilabel:`Project Details` dialog."
-   ":kbd:`Return`",                      "If in the project tree, open a document for editing."
-
-.. note::
-   On macOS, replace :kbd:`Ctrl` with :kbd:`Cmd`.
-
-
-.. _a_ui_shortcuts_ins:
-
-Insert Shortcuts
-----------------
-
-A set of insert features are also available through shortcuts, but they require a double
-combination of key sequences. The insert feature is activated with :kbd:`Ctrl`:kbd:`K`, followed by
-a key or key combination for the inserted content.
-
-.. csv-table:: Keyboard Shortcuts
-   :header: "Shortcut", "Description"
-   :widths: 40, 60
-   :class: "tight-table"
-
-   ":kbd:`Ctrl`:kbd:`K`, :kbd:`−`",                 "Insert a short dash (en dash)."
-   ":kbd:`Ctrl`:kbd:`K`, :kbd:`_`",                 "Insert a long dash (em dash)."
-   ":kbd:`Ctrl`:kbd:`K`, :kbd:`Ctrl`:kbd:`_`",      "Insert a horizontal bar (quotation dash)."
-   ":kbd:`Ctrl`:kbd:`K`, :kbd:`~`",                 "Insert a figure dash (same width as a number)."
-   ":kbd:`Ctrl`:kbd:`K`, :kbd:`1`",                 "Insert a left single quote."
-   ":kbd:`Ctrl`:kbd:`K`, :kbd:`2`",                 "Insert a right single quote."
-   ":kbd:`Ctrl`:kbd:`K`, :kbd:`3`",                 "Insert a left double quote."
-   ":kbd:`Ctrl`:kbd:`K`, :kbd:`4`",                 "Insert a right double quote."
-   ":kbd:`Ctrl`:kbd:`K`, :kbd:`'`",                 "Insert a modifier apostrophe."
-   ":kbd:`Ctrl`:kbd:`K`, :kbd:`.`",                 "Insert an ellipsis."
-   ":kbd:`Ctrl`:kbd:`K`, :kbd:`Ctrl`:kbd:`'`",      "Insert a prime."
-   ":kbd:`Ctrl`:kbd:`K`, :kbd:`Ctrl`:kbd:`""`",     "Insert a double prime."
-   ":kbd:`Ctrl`:kbd:`K`, :kbd:`Return`",            "Insert a hard line break."
-   ":kbd:`Ctrl`:kbd:`K`, :kbd:`Space`",             "Insert a non-breaking space."
-   ":kbd:`Ctrl`:kbd:`K`, :kbd:`Shift`:kbd:`Space`", "Insert a thin space."
-   ":kbd:`Ctrl`:kbd:`K`, :kbd:`Ctrl`:kbd:`Space`",  "Insert a thin non-breaking space."
-   ":kbd:`Ctrl`:kbd:`K`, :kbd:`*`",                 "Insert a list bullet."
-   ":kbd:`Ctrl`:kbd:`K`, :kbd:`Ctrl`:kbd:`−`",      "Insert a hyphen bullet (alternative bullet)."
-   ":kbd:`Ctrl`:kbd:`K`, :kbd:`Ctrl`:kbd:`*`",      "Insert a flower mark (alternative bullet)."
-   ":kbd:`Ctrl`:kbd:`K`, :kbd:`%`",                 "Insert a per mille symbol."
-   ":kbd:`Ctrl`:kbd:`K`, :kbd:`Ctrl`:kbd:`O`",      "Insert a degree symbol."
-   ":kbd:`Ctrl`:kbd:`K`, :kbd:`Ctrl`:kbd:`X`",      "Insert a times sign."
-   ":kbd:`Ctrl`:kbd:`K`, :kbd:`Ctrl`:kbd:`D`",      "Insert a division sign."
-   ":kbd:`Ctrl`:kbd:`K`, :kbd:`G`",                 "Insert a ``@tag`` keyword."
-   ":kbd:`Ctrl`:kbd:`K`, :kbd:`V`",                 "Insert a ``@pov`` keyword."
-   ":kbd:`Ctrl`:kbd:`K`, :kbd:`F`",                 "Insert a ``@focus`` keyword."
-   ":kbd:`Ctrl`:kbd:`K`, :kbd:`C`",                 "Insert a ``@char`` keyword."
-   ":kbd:`Ctrl`:kbd:`K`, :kbd:`P`",                 "Insert a ``@plot`` keyword."
-   ":kbd:`Ctrl`:kbd:`K`, :kbd:`T`",                 "Insert a ``@time`` keyword."
-   ":kbd:`Ctrl`:kbd:`K`, :kbd:`L`",                 "Insert a ``@location`` keyword."
-   ":kbd:`Ctrl`:kbd:`K`, :kbd:`O`",                 "Insert an ``@object`` keyword."
-   ":kbd:`Ctrl`:kbd:`K`, :kbd:`E`",                 "Insert an ``@entity`` keyword."
-   ":kbd:`Ctrl`:kbd:`K`, :kbd:`X`",                 "Insert a ``@custom`` keyword."
+formatted comment. See :ref:`a_fmt_comm`.

docs/source/usage_projectformat.rst

@@ -0,0 +1,133 @@
+.. _a_prjfmt:
+
+**********************
+Project Format Changes
+**********************
+
+.. _File Format Spec 1.5: _static/fileformatspec15.pdf
+.. _documentation: https://novelwriter.readthedocs.io
+
+Most of the changes to the file formats over the history of novelWriter have no impact on the
+user-side of things. The project files are generally updated automatically. However, some of the
+changes require minor actions from the user.
+
+The key changes in the formats are listed below, as well as the user actions required, where
+applicable.
+
+.. only:: not html
+
+   A full project file format specification is available in the online documentation_.
+
+.. caution::
+
+   When you update a project from one format version to the next, the project can no longer be
+   opened by a version of novelWriter prior to the version where the new file format was
+   introduced. You will get a notification about any updates to your project file format and will
+   have the option to decline the upgrade.
+
+.. only:: html
+
+   **For Developers**
+
+   A full description of the current file format is available in the `File Format Spec 1.5`_
+   document, available as a PDF. This document is intended for contributors to novelWriter, those
+   building project conversion tools, either to or from tne novelWriter format, and for those who
+   wish to make their own templating system.
+
+
+.. _a_prjfmt_1_5:
+
+Format 1.5 Changes
+==================
+
+This project format was introduced in novelWriter version 2.0 RC 2.
+
+This is a modification of the 1.4 format. It makes the XML more consistent in that meta data have
+been moved to their respective section nodes as attributes, and key/value settings now have a
+consistent format. Logical flags are saved as yes/no instead of Python True/False, and the main
+heading of the document is now saved to the item rather than in the index. The conversion is done
+automatically the first time a project is loaded. No user action is required.
+
+
+.. _a_prjfmt_1_4:
+
+Format 1.4 Changes
+==================
+
+This project format was introduced in novelWriter version 2.0 RC 1. Since this was a release
+candidate, it is unlikely that your project uses it, but it may be the case if you've installed a
+pre-release.
+
+This format changes the way project items (folders, documents and notes) are stored. It is a more
+compact format that is simpler and faster to parse, and easier to extend. The conversion is done
+automatically the first time a project is loaded. No user action is required.
+
+
+.. _a_prjfmt_1_3:
+
+Format 1.3 Changes
+==================
+
+This project format was introduced in novelWriter version 1.5.
+
+With this format, the number of document layouts was reduced from 8 to 2. The conversion of
+document layouts is performed automatically when the project is opened.
+
+Due to the reduction of layouts, some features that were previously controlled by these layouts
+will be lost. These features are instead now controlled by syntax codes, so to recover these
+features, some minor modification must be made to select documents by the user.
+
+The manual changes the user must make should be very few as they apply to document layouts that
+should be used only a few places in any given project. These are as follows:
+
+**Title Pages**
+
+* The formatting of the level one title on the title page must be changed from ``# Title Text`` to
+  ``#! Title Text`` in order to retain the previous functionality. See :ref:`a_fmt_head`.
+* Any text that was previously centred on the page must be manually centred using the new text
+  alignment feature. See :ref:`a_fmt_align`.
+
+**Unnumbered Chapters**
+
+* Since the specific layout for unnumbered chapters has been dropped, such chapters must all use
+  the ``##! Chapter Name`` formatting code instead of ``## Chapter Name``. This also includes
+  chapters marked by an asterisk: ``## *Chapter Name``, as this feature has also been dropped.
+  See :ref:`a_fmt_head`.
+
+**Plain Pages**
+
+* The layout named "Plain Page" has also been removed. The only feature of this layout was that it
+  ensured that the content always started on a fresh page. In the new format, fresh pages can be
+  set anywhere in the text with the ``[NEW PAGE]`` code. See :ref:`a_fmt_break`.
+
+
+.. _a_prjfmt_1_2:
+
+Format 1.2 Changes
+==================
+
+This project format was introduced in novelWriter version 0.10.
+
+With this format, the way auto-replace entries were stored in the main project XML file changed.
+
+
+.. _a_prjfmt_1_1:
+
+Format 1.1 Changes
+==================
+
+This project format was introduced in novelWriter version 0.7.
+
+With this format, the ``content`` folder was introduced in the project storage. Previously, all
+novelWriter documents were saved in a series of folders numbered from ``data_0`` to ``data_f``.
+
+It also reduces the number of meta data and cache files. These files are automatically deleted if
+an old project is opened. This was also when the Table of Contents file was introduced.
+
+
+.. _a_prjfmt_1_0:
+
+Format 1.0 Changes
+==================
+
+This is the original file format and project structure. It was in use up to version 0.6.3.

docs/source/usage_shortcuts.rst

@@ -0,0 +1,146 @@
+.. _a_kb:
+
+******************
+Keyboard Shortcuts
+******************
+
+Most features in novelWriter are available as keyboard shortcuts. This is a reference list if these
+shortcuts. Most of them are also listed in the application.
+
+
+.. _a_kb_main:
+
+Main Shortcuts
+==============
+
+The main shorcuts are as follows:
+
+.. csv-table:: Keyboard Shortcuts
+   :header: "Shortcut", "Description"
+   :widths: 22, 78
+   :class: "tight-table"
+
+   ":kbd:`F1`",                          "Open the online user manual."
+   ":kbd:`F2`",                          "If in the project tree, edit an item's label."
+   ":kbd:`F3`",                          "Find next occurrence of search word in current document."
+   ":kbd:`F5`",                          "Open the :guilabel:`Build Novel Project` dialog."
+   ":kbd:`F6`",                          "Open the :guilabel:`Writing Statistics` dialog."
+   ":kbd:`F7`",                          "Re-run spell checker."
+   ":kbd:`F8`",                          "Toggle :guilabel:`Focus Mode`."
+   ":kbd:`F9`",                          "Re-build the project index."
+   ":kbd:`F11`",                         "Toggle full screen mode."
+   ":kbd:`Return`",                      "If in the project tree, open a document for editing."
+   ":kbd:`Alt`:kbd:`1`",                 "Switch focus to the project tree. On Windows, use :kbd:`Ctrl`:kbd:`Alt`:kbd:`1`."
+   ":kbd:`Alt`:kbd:`2`",                 "Switch focus to document editor. On Windows, use :kbd:`Ctrl`:kbd:`Alt`:kbd:`2`."
+   ":kbd:`Alt`:kbd:`3`",                 "Switch focus to document viewer. On Windows, use :kbd:`Ctrl`:kbd:`Alt`:kbd:`3`."
+   ":kbd:`Alt`:kbd:`4`",                 "Switch focus to outline view. On Windows, use :kbd:`Ctrl`:kbd:`Alt`:kbd:`4`."
+   ":kbd:`Alt`:kbd:`Left`",              "Move backward in the view history of the document viewer."
+   ":kbd:`Alt`:kbd:`Right`",             "Move forward in the view history of the document viewer."
+   ":kbd:`Ctrl`:kbd:`.`",                "Open the context menu in the project tree or the document editor."
+   ":kbd:`Ctrl`:kbd:`,`",                "Open the :guilabel:`Preferences` dialog."
+   ":kbd:`Ctrl`:kbd:`/`",                "Toggle block format as comment."
+   ":kbd:`Ctrl`:kbd:`0`",                "Remove block formatting for block under cursor."
+   ":kbd:`Ctrl`:kbd:`1`",                "Change block format to header level 1."
+   ":kbd:`Ctrl`:kbd:`2`",                "Change block format to header level 2."
+   ":kbd:`Ctrl`:kbd:`3`",                "Change block format to header level 3."
+   ":kbd:`Ctrl`:kbd:`4`",                "Change block format to header level 4."
+   ":kbd:`Ctrl`:kbd:`5`",                "Change block alignment to left-aligned."
+   ":kbd:`Ctrl`:kbd:`6`",                "Change block alignment to centred."
+   ":kbd:`Ctrl`:kbd:`7`",                "Change block alignment to right-aligned."
+   ":kbd:`Ctrl`:kbd:`8`",                "Add a left margin to the block."
+   ":kbd:`Ctrl`:kbd:`9`",                "Add a right margin to the block."
+   ":kbd:`Ctrl`:kbd:`A`",                "Select all text in the document."
+   ":kbd:`Ctrl`:kbd:`B`",                "Format selected text, or word under cursor, with strong emphasis (bold)."
+   ":kbd:`Ctrl`:kbd:`C`",                "Copy selected text to clipboard."
+   ":kbd:`Ctrl`:kbd:`D`",                "Strikethrough selected text, or word under cursor."
+   ":kbd:`Ctrl`:kbd:`F`",                "Open the search bar and search for the selected word, if any is selected."
+   ":kbd:`Ctrl`:kbd:`G`",                "Find next occurrence of search word in current document."
+   ":kbd:`Ctrl`:kbd:`H`",                "Open the search and replace tool and search for the selected word, if any is selected. (On Mac, this is :kbd:`Cmd`:kbd:`=`.)"
+   ":kbd:`Ctrl`:kbd:`I`",                "Format selected text, or word under cursor, with emphasis (italic)."
+   ":kbd:`Ctrl`:kbd:`K`",                "Activate the insert commands. The commands are listed in :ref:`a_kb_ins`."
+   ":kbd:`Ctrl`:kbd:`L`",                "Open the :guilabel:`Quick Links` menu in the Project Tree."
+   ":kbd:`Ctrl`:kbd:`N`",                "Open the Create New Item menu in the Project Tree."
+   ":kbd:`Ctrl`:kbd:`O`",                "Open selected document."
+   ":kbd:`Ctrl`:kbd:`Q`",                "Exit novelWriter."
+   ":kbd:`Ctrl`:kbd:`R`",                "If in the project tree, open a document for viewing. If in the editor, open current document for viewing."
+   ":kbd:`Ctrl`:kbd:`S`",                "Save the current document in the document editor."
+   ":kbd:`Ctrl`:kbd:`V`",                "Paste text from clipboard to cursor position."
+   ":kbd:`Ctrl`:kbd:`W`",                "Close the current document in the document editor."
+   ":kbd:`Ctrl`:kbd:`X`",                "Cut selected text to clipboard."
+   ":kbd:`Ctrl`:kbd:`Y`",                "Redo latest undo."
+   ":kbd:`Ctrl`:kbd:`Z`",                "Undo latest changes."
+   ":kbd:`Ctrl`:kbd:`F7`",               "Toggle spell checking."
+   ":kbd:`Ctrl`:kbd:`Up`",               "Move item one step up in the project tree."
+   ":kbd:`Ctrl`:kbd:`Down`",             "Move item one step down in the project tree."
+   ":kbd:`Ctrl`:kbd:`Del`",              "Delete next word in editor."
+   ":kbd:`Ctrl`:kbd:`Backspace`",        "Delete previous word in editor."
+   ":kbd:`Ctrl`:kbd:`'`",                "Wrap selected text, or word under cursor, in single quotes."
+   ":kbd:`Ctrl`:kbd:`""`",               "Wrap selected text, or word under cursor, in double quotes."
+   ":kbd:`Ctrl`:kbd:`Return`",           "Open the tag or reference under the cursor in the Viewer."
+   ":kbd:`Ctrl`:kbd:`Shift`:kbd:`,`",    "Open the :guilabel:`Project Settings` dialog."
+   ":kbd:`Ctrl`:kbd:`Shift`:kbd:`/`",    "Remove block formatting for block under cursor."
+   ":kbd:`Ctrl`:kbd:`Shift`:kbd:`1`",    "Replace occurrence of search word in current document, and search for next occurrence."
+   ":kbd:`Ctrl`:kbd:`Shift`:kbd:`A`",    "Select all text in current paragraph."
+   ":kbd:`Ctrl`:kbd:`Shift`:kbd:`G`",    "Find previous occurrence of search word in current document."
+   ":kbd:`Ctrl`:kbd:`Shift`:kbd:`I`",    "Import text to the current document from a text file."
+   ":kbd:`Ctrl`:kbd:`Shift`:kbd:`O`",    "Open a project."
+   ":kbd:`Ctrl`:kbd:`Shift`:kbd:`R`",    "Close the document viewer."
+   ":kbd:`Ctrl`:kbd:`Shift`:kbd:`S`",    "Save the current project."
+   ":kbd:`Ctrl`:kbd:`Shift`:kbd:`W`",    "Close the current project."
+   ":kbd:`Ctrl`:kbd:`Shift`:kbd:`Z`",    "Undo move of project tree item."
+   ":kbd:`Ctrl`:kbd:`Shift`:kbd:`Del`",  "If in the project tree, move an item to Trash."
+   ":kbd:`Shift`:kbd:`F1`",              "Open the local user manual (PDF) if it is available."
+   ":kbd:`Shift`:kbd:`F3`",              "Find previous occurrence of search word in current document."
+   ":kbd:`Shift`:kbd:`F6`",              "Open the :guilabel:`Project Details` dialog."
+
+.. note::
+   On macOS, replace :kbd:`Ctrl` with :kbd:`Cmd`.
+
+
+.. _a_kb_ins:
+
+Insert Shortcuts
+================
+
+A set of insert features are also available through shortcuts, but they require a double
+combination of key sequences. The insert feature is activated with :kbd:`Ctrl`:kbd:`K`, followed by
+a key or key combination for the inserted content.
+
+.. csv-table:: Keyboard Shortcuts
+   :header: "Shortcut", "Description"
+   :widths: 30, 70
+   :class: "tight-table"
+
+   ":kbd:`Ctrl`:kbd:`K`, :kbd:`−`",                 "Insert a short dash (en dash)."
+   ":kbd:`Ctrl`:kbd:`K`, :kbd:`_`",                 "Insert a long dash (em dash)."
+   ":kbd:`Ctrl`:kbd:`K`, :kbd:`Ctrl`:kbd:`_`",      "Insert a horizontal bar (quotation dash)."
+   ":kbd:`Ctrl`:kbd:`K`, :kbd:`~`",                 "Insert a figure dash (same width as a number)."
+   ":kbd:`Ctrl`:kbd:`K`, :kbd:`1`",                 "Insert a left single quote."
+   ":kbd:`Ctrl`:kbd:`K`, :kbd:`2`",                 "Insert a right single quote."
+   ":kbd:`Ctrl`:kbd:`K`, :kbd:`3`",                 "Insert a left double quote."
+   ":kbd:`Ctrl`:kbd:`K`, :kbd:`4`",                 "Insert a right double quote."
+   ":kbd:`Ctrl`:kbd:`K`, :kbd:`'`",                 "Insert a modifier apostrophe."
+   ":kbd:`Ctrl`:kbd:`K`, :kbd:`.`",                 "Insert an ellipsis."
+   ":kbd:`Ctrl`:kbd:`K`, :kbd:`Ctrl`:kbd:`'`",      "Insert a prime."
+   ":kbd:`Ctrl`:kbd:`K`, :kbd:`Ctrl`:kbd:`""`",     "Insert a double prime."
+   ":kbd:`Ctrl`:kbd:`K`, :kbd:`Space`",             "Insert a non-breaking space."
+   ":kbd:`Ctrl`:kbd:`K`, :kbd:`Shift`:kbd:`Space`", "Insert a thin space."
+   ":kbd:`Ctrl`:kbd:`K`, :kbd:`Ctrl`:kbd:`Space`",  "Insert a thin non-breaking space."
+   ":kbd:`Ctrl`:kbd:`K`, :kbd:`*`",                 "Insert a list bullet."
+   ":kbd:`Ctrl`:kbd:`K`, :kbd:`Ctrl`:kbd:`−`",      "Insert a hyphen bullet (alternative bullet)."
+   ":kbd:`Ctrl`:kbd:`K`, :kbd:`Ctrl`:kbd:`*`",      "Insert a flower mark (alternative bullet)."
+   ":kbd:`Ctrl`:kbd:`K`, :kbd:`%`",                 "Insert a per mille symbol."
+   ":kbd:`Ctrl`:kbd:`K`, :kbd:`Ctrl`:kbd:`O`",      "Insert a degree symbol."
+   ":kbd:`Ctrl`:kbd:`K`, :kbd:`Ctrl`:kbd:`X`",      "Insert a times sign."
+   ":kbd:`Ctrl`:kbd:`K`, :kbd:`Ctrl`:kbd:`D`",      "Insert a division sign."
+   ":kbd:`Ctrl`:kbd:`K`, :kbd:`G`",                 "Insert a ``@tag`` keyword."
+   ":kbd:`Ctrl`:kbd:`K`, :kbd:`V`",                 "Insert a ``@pov`` keyword."
+   ":kbd:`Ctrl`:kbd:`K`, :kbd:`F`",                 "Insert a ``@focus`` keyword."
+   ":kbd:`Ctrl`:kbd:`K`, :kbd:`C`",                 "Insert a ``@char`` keyword."
+   ":kbd:`Ctrl`:kbd:`K`, :kbd:`P`",                 "Insert a ``@plot`` keyword."
+   ":kbd:`Ctrl`:kbd:`K`, :kbd:`S`",                 "Insert a synopsis comment."
+   ":kbd:`Ctrl`:kbd:`K`, :kbd:`T`",                 "Insert a ``@time`` keyword."
+   ":kbd:`Ctrl`:kbd:`K`, :kbd:`L`",                 "Insert a ``@location`` keyword."
+   ":kbd:`Ctrl`:kbd:`K`, :kbd:`O`",                 "Insert an ``@object`` keyword."
+   ":kbd:`Ctrl`:kbd:`K`, :kbd:`E`",                 "Insert an ``@entity`` keyword."
+   ":kbd:`Ctrl`:kbd:`K`, :kbd:`X`",                 "Insert a ``@custom`` keyword."

docs/source/usage_structure.rst

@@ -1,250 +0,0 @@
-.. _a_struct:
-
-***************
-Novel Structure
-***************
-
-This section covers the structure of a novel project.
-
-It concerns documents under the :guilabel:`Novel` type root folder only. There are some
-restrictions and features that only apply to these types of documents.
-
-
-.. _a_struct_heads:
-
-Importance of Headings
-======================
-
-Subfolders under root folders have no impact on the structure of the novel itself. The structure is
-instead dictated by the heading level of the headers within the documents.
-
-Four levels of headings are supported, signified by the number of hashes (``#``) preceding the
-title. See also the :ref:`a_ui_md` section for more details about the markdown syntax.
-
-.. note::
-   The header levels are not only important when generating the exported novel file, they are also
-   used by the indexer when building the outline tree in the :guilabel:`Outline` tab as well as the
-   :guilabel:`Novel` tab of the project tree. Each heading also starts a new region where new
-   references and tags can be defined.
-
-The different header levels are interpreted as specific section types of the novel in the following
-way:
-
-``# Header1``
-   Header level one signifies that the text refers to either the novel title or the name of a top
-   level partition. The latter is useful when you want to split the manuscript up into books,
-   parts, or acts.
-
-``## Header2``
-   Header level two signifies a chapter level partition. Each time you want to start a new chapter,
-   you must add such a heading. If you choose to split your manuscript up into one document per
-   scene, you need a single chapter document with just the heading. You can of course also add a
-   synopsis and reference keywords to the chapter document. If you want to open the chapter with a
-   quote or other introductory text that isn't part of a scene, this is also where you'd put that
-   text.
-
-``### Header3``
-   Header level three signifies a scene level partition. You must provide a title text, but the
-   title text can be replaced with a scene separator or just skipped entirely when you export your
-   manuscript.
-
-``#### Header4``
-   Header level four signifies a sub-scene level partition, usually called a "section" in the
-   documentation and the user interface. These can be useful if you want to change tag references
-   mid-scene, like if you change the point-of-view character. You are free to use sections as you
-   wish, and can filter them out of the final manuscript just like with scene titles.
-
-.. tip::
-   There are multiple options of how to process novel titles when exporting the manuscript. For
-   instance, chapter numbers can be applied automatically, and so can scene numbers if you want
-   them in a draft manuscript. See the :ref:`a_export` page for more details.
-
-
-.. _a_struct_heads_unnum:
-
-Unnumbered Chapter Headings
----------------------------
-
-If you use layout types for your documents, the automatic numbering feature for your chapters is
-controlled by whether you use the :guilabel:`Chapter` or :guilabel:`Unnumbered` layout type for
-your document. However, if you have a different document layout where this isn't practical, you can
-also switch off chapter numbering for a chapter by making the first character of the chapter title
-an asterisk (``*``). Like so:
-
-``## *Unnumbered Chapter Title``
-
-The leading asterisk is only considered by the :guilabel:`Build Novel Project` tool, and will be
-removed before the title is inserted at the location of the ``%title%`` label. See the
-:ref:`a_export` page for more details.
-
-.. note::
-   If you need the first character of the title to be an actual asterisk, you must escape it:
-   ``\*``.
-
-
-.. _a_struct_tags:
-
-Tag References
-==============
-
-Each text partition, indicated by a heading of any level, can contain references to tags set in the
-supporting notes of the project. The references are gathered by the indexer and used to generate an
-outline view on the :guilabel:`Outline` tab of how the different parts of the novel are connected.
-This section covers how to set references to tags. See :ref:`a_notes_tags` for how to define tags
-the references can point to.
-
-References and tags are also clickable in the document editor and viewer, making it easy to
-navigate between reference notes while writing. Clicked links are always opened in the view panel.
-
-References are set as a keyword and a list of corresponding tags. The valid keywords are listed
-below. The format of a reference line is ``@keyword: value1, [value2] ... [valueN]``. All keywords
-allow multiple values.
-
-``@pov``
-   The point-of-view character for the current section. The target must be a note tag in the
-   :guilabel:`Character` type root folder.
-
-``@focus``
-   The character that has the focus for the current section. This can be used in cases where the
-   focus is not a point-of-view character. The target must be a note tag in the
-   :guilabel:`Character` type root folder.
-
-``@char``
-   Other characters in the current section. The target must be a note tag in the
-   :guilabel:`Character` type root folder. This should not include the point-of-view character.
-
-``@plot``
-   The plot or subplot advanced in the current section. The target must be a note tag in the
-   :guilabel:`Plot` type root folder.
-
-``@time``
-   The timelines touched by the current section. The target must be a note tag in the
-   :guilabel:`Timeline` type root folder.
-
-``@location``
-   The location the current section takes place in. The target must be a note tag in the
-   :guilabel:`Locations` type root folder.
-
-``@object``
-   Objects present in the current section. The target must be a note tag in the :guilabel:`Object`
-   type root folder.
-
-``@entity``
-   Entities present in the current section. The target must be a note tag in the
-   :guilabel:`Entities` type root folder.
-
-``@custom``
-   Custom references in the current section. The target must be a note tag in a :guilabel:`Custom`
-   type root folder.
-
-The syntax highlighter will alert the user that the tags and references are used correctly, and
-that the tags referenced exist.
-
-The highlighter may be mistaken if the index of defined tags is out of date. If so, press :kbd:`F9`
-to regenerate it, or select :guilabel:`Rebuild Index` from the :guilabel:`Tools` menu. In general,
-the index for a document is regenerated when it is saved, so this shouldn't normally be necessary.
-
-
-.. _a_struct_layout:
-
-Novel Document Layout
-=====================
-
-All documents in the project can have a layout format set. These layouts are important when the
-project is exported as they indicate how to treat the content in terms of text formatting,
-headings, and page breaks. The layout for each document is indicated as the last set of characters
-in the :guilabel:`Flags` column of the project tree.
-
-Not all layout types are actually treated differently, they also help to indicate what each
-document is intended for in your project. The :guilabel:`Book` layout is a generic novel document
-layout that is formatted identically to :guilabel:`Chapter` and :guilabel:`Scene` layout documents,
-but may help to indicate what each document does in your project.
-
-You can for instance lay out your project using :guilabel:`Book` documents for each act, and then
-later split those into chapter or scene documents by using the :guilabel:`Split Document` tool.
-Scenes can also be contained within :guilabel:`Chapter` type documents, but you lose the drag and
-drop feature that comes with having them in separate documents if you organise them this way.
-
-Some layouts *do* have implications on how the project is exported. Documents with layout
-:guilabel:`Title Page` and :guilabel:`Partition` have all headings and text centred, while the
-:guilabel:`Unnumbered` layout disables the automatic chapter numbering feature for everything
-contained within it. The latter is convenient for Prologue and Epilogue type chapters.
-
-The above layout formats are only usable in the Novel root folder. Documents that are not a part of
-the novel itself should have the :guilabel:`Note` layout. These documents are not getting any
-special formatting, and it is possible to collectively filter them out during export. Notes can be
-used anywhere in the project, also in the :guilabel:`Novel` root folder.
-
-Below is an overview of all available layout formats.
-
-:guilabel:`Title Page`
-   The title page layout. The title should be formatted as a heading level one. All text is centred
-   on export.
-
-:guilabel:`Plain Page`
-   A plain page layout useful for instance for front matter pages. Heading levels are ignored for
-   this layout format, and so are formatting options like :guilabel:`Justify Text`. The page is
-   exported with a page break before it.
-
-:guilabel:`Book`
-   This is the generic novel format that in principle can be used for all novel documents. Since
-   the internal structure of the novel is controlled by the heading levels, this layout will
-   produce the same result as a collection of :guilabel:`Partition`, :guilabel:`Chapter` and
-   :guilabel:`Scene` layout documents. However, it does not provide the functionality of the
-   :guilabel:`Unnumbered` layout format by default, but this can still be achieved by prefixing the
-   chapter title with an asterisk (``*``). See :ref:`a_struct_heads_unnum` for more details.
-
-:guilabel:`Partition`
-   A partition can be used to split the novel into parts. Partition titles are indicated with a
-   level one heading. You can also add text and meta data to the page. The :guilabel:`Partition`
-   layout will in addition force a page break before the heading, and centre all content on the
-   page.
-
-:guilabel:`Chapter`
-   Signifies the start of a new chapter. If the text itself is contained in scene documents, these
-   documents should only contain the title, comments, synopsis, and tag references for characters,
-   plot, etc. The heading for chapters should be level two. If you need an opening text, like a
-   quote or other leading text before the first scene, this is also where you'd want to add this
-   text.
-
-:guilabel:`Unnumbered`
-   Same as :guilabel:`Chapter`, but when exporting the project, and automatic chapter numbering is
-   enabled, documents with this layout will not increment and apply a chapter number. It also has a
-   separate title formatting setting. This makes the layout suitable for Prologue and Epilogue type
-   chapters.
-
-:guilabel:`Scene`
-   Used for scenes. This document should have a header of level three. Further sections can have
-   headers of level four, but there are no layout specifically for sections.
-
-:guilabel:`Note`
-   A generic document that is optionally ignored when the novel project is exported. Use this
-   layout for descriptions of content in the supporting root folders. Notes can also be added to
-   the :guilabel:`Novel` root folder if you need to insert notes there. Note headers receive no
-   special formatting when building the project. They are always exported as-is.
-
-.. note::
-   The layout granularity is entirely optional. In principle, you can write the entire novel in a
-   single document with layout :guilabel:`Book`. You can also have a single document per chapter if
-   that suits you better. The :guilabel:`Outline` will show your structure of chapters and scenes
-   regardless of how your documents are organised. So will the novel tree.
-
-.. tip::
-   You can always start writing with a coarse layout with one or a few documents, and then later
-   use the split tool to automatically split the documents into separate chapter and scene
-   documents. The split tool will try to select the correct layout for each of the new documents.
-
-
-.. _a_struct_layout_auto:
-
-Novel Layout Automation
------------------------
-
-When a document is saved from the document editor, novelWriter will check if the level of the first
-header of the document matches the selected document layout. If the header level is inconsistent
-with the layout, the layout will automatically be corrected if it can be unambiguously determined.
-
-This means that for instance saving a document with header level three, when the layout is set to
-:guilabel:`Chapter`, the layout will automatically be changed to :guilabel:`Scene`. If, however,
-the layout was set to :guilabel:`Book`, no change will be made because the :guilabel:`Book` layout
-is not associated with a specific header level.

docs/source/usage_typography.rst

@@ -4,10 +4,15 @@
 Typographical Notes
 *******************
 
+.. _Prime: https://en.wikipedia.org/wiki/Prime_(symbol)
+.. _thin space: https://en.wikipedia.org/wiki/Thin_space
+.. _Quotation Mark: https://en.wikipedia.org/wiki/Quotation_mark
+.. _Modifier letter apostrophe: https://en.wikipedia.org/wiki/Modifier_letter_apostrophe
+
 novelWriter has some support for typographical symbols that are not usually easily available in
 many text editors. This includes for instance the proper unicode quotation marks, dashes, ellipsis,
 thin spaces, etc. All these symbols are available from the :guilabel:`Insert` menu, and via
-keyboard shortcuts. See :ref:`a_ui_shortcuts_ins`.
+keyboard shortcuts. See :ref:`a_kb_ins`.
 
 This chapter provides some additional information on how novelWriter handles these symbols.
 
@@ -17,7 +22,7 @@ This chapter provides some additional information on how novelWriter handles the
 Special Notes on Symbols
 ========================
 
-Some additional notes on the available symbols.
+This section contains additional notes on the available special symbols.
 
 
 Dashes and Ellipsis
@@ -29,8 +34,8 @@ always be reverted with the undo command :kbd:`Ctrl`:kbd:`Z`, reverting the text
 before the automatic replacement occurred.
 
 In addition, "Figure Dash" is available. The Figure Dash is a dash that has the same width as the
-numbers of the same font, for most fonts. It helps to align numbers align nicely in columns when
-you need to use a dash in them.
+numbers of the same font, for most fonts. It helps to align numbers nicely in columns when you need
+to use a dash in them.
 
 
 Single and Double Quotes
@@ -44,12 +49,10 @@ Ordinarily, text wrapped in quotes are highlighted by the editor. This is meant
 for highlighting dialogue between characters. This feature can be disabled in
 :guilabel:`Preferences` if this feature isn't wanted.
 
-The editor distinguishes between text wrapped in regular straight quotes and with the user-selected
-double quote symbols. This is to help the writer recognise which parts of the text are not using
-the chosen quote symbols. Two convenience functions in the :guilabel:`Format` menu can be used to
-re-format a selected section of text with the correct quote symbols.
-
-.. _Quotation Mark: https://en.wikipedia.org/wiki/Quotation_mark
+The editor distinguishes between text wrapped in regular straight double quotes and the
+user-selected double quote symbols. This is to help the writer recognise which parts of the text
+are not using the chosen quote symbols. Two convenience functions in the :guilabel:`Format` menu
+can be used to re-format a selected section of text with the correct quote symbols.
 
 
 Single and Double Prime
@@ -62,8 +65,6 @@ and double straight quotes, and may be renderred similarly by the font, but they
 codes. Using these correctly will also prevent the auto-replace and dialogue highlighting features
 misunderstanding their meaning in the text.
 
-.. _Prime: https://en.wikipedia.org/wiki/Prime_(symbol)
-
 
 Modifier Letter Apostrophe
 --------------------------
@@ -82,8 +83,6 @@ right single quotation marks, depending on the font. There is a Wikipedia articl
    automatically with the corresponding right hand single quote symbol as is generally recommended.
    Therefore it doesn't really matter if you only use them to correct highlighting.
 
-.. _Modifier letter apostrophe: https://en.wikipedia.org/wiki/Modifier_letter_apostrophe
-
 
 Special Space Symbols
 ---------------------
@@ -100,5 +99,3 @@ spot them in the text. The colour will depend on the selected colour theme.
 
 The thin and non-breaking spaces are converted to their corresponding HTML codes on export to HTML
 format.
-
-.. _thin space: https://en.wikipedia.org/wiki/Thin_space

i18n/README.md

@@ -0,0 +1,140 @@
+# novelWriter Internationalisation (i18n)
+
+The maintenance of translations has been moved to the Crowdin service. The translation strings can
+be edited there at the [novelWriter project page](https://crowdin.com/project/novelwriter).
+However, please read the Translation Guidelines section below.
+
+You can still use the manual approach listed below, and then upload the file through the website's
+interface. The translation strings for that language will then be updated and queued for approval.
+
+To verify a language file translated through the Crowdin tool, download and extract it into the
+`i18n` folder in the novelWriter source and follow the instructions in
+[Generate an Updated Translation File](#generate-an-updated-translation-file) below.
+
+
+# Translation Guidelines
+
+When contributing translations, keep the following things in mind.
+
+* For descriptive labels and dialog boxes, make sure you do _not_ change the meaning of the text
+  when you translate it from English. The user must receive the same instructions or information
+  regardless of language. This is improtant, otherwise the documentation will be inconsistent with
+  the user interface and it will become a lot more difficult to handle user issues and questions.
+* If you think a label or description is misleading or incomplete, please file an issue report. The
+  correct way to handle such changes is to change the text in the code first, which will then be
+  forwarded to _all_ translators such that the GUI is consistent across all languages.
+* For very short labels, like button labels. it may be fine to replace the word with a similar
+  word, but only as long as the user understands what it is supposed to do. Some buttons and tabs
+  have limited space. If necessary, it is OK to use abbreviations.
+
+
+# Direct Approach Using Qt Linguist
+
+Here you will find instructions for translating novelWriter to a new language directly using Qt
+Linguist, or updating the translations for an already existing supported language.
+
+There are two areas relevant to localisation:
+
+* The Qt5 GUI translation files, which consists of `nw_XX.ts` files. This is the bulk of the
+  translation work.
+* The `project_XX.json` files. See [Project Localisation](#project-localisation) below.
+
+The `XX` in the file name corresponds to the language and country code for the translation. For
+instance `en_GB` for British English.
+
+
+## Qt5 GUI Localisation
+
+You will need the translation tool Qt 5 Linguist on your system.
+
+For Ubuntu/Debian, run:
+```bash
+sudo apt install qttools5-dev-tools
+```
+
+See also [Qt Linguist Manual: Translators](https://doc.qt.io/qt-5/linguist-translators.html).
+
+
+### Workflow
+
+Here's an overview of the localisation workflow:
+
+1. First, create a new branch off of `main`, and there, generate a new `nw_XX.ts` translation file.
+1. Load the translation file in Qt Linguist. Translate and save your changes.
+1. Generate the `nw_XX.qm` file.
+1. Run the application and verify your changes. Iterate from step 2.
+1. Once finished, commit your changes and submit your pull request.
+
+When you want to translate new changes, again create a new branch off of `main` and re-generate the
+translation file. Continue from step 2.
+
+
+### Generate an Updated Translation File
+
+The `i18n` folder at the root of the repository contains the `nw_XX.ts` translation files.
+
+Whether to add a new language to the translation framework, or to  update the file against the
+current source code, you must first run the `qtlupdate` command:
+```bash
+python3 setup.py qtlupdate i18n/nw_XX.ts
+```
+
+The file name must be in the correct format. All translation files must be located in the `i18n`
+folder, start with `nw_` and end with `.ts`. In between goes the language and country code. It must
+be a valid ISO language code, otherwise novelWriter will not accept the file.
+
+For instance, the French translation uses the language code `fr_FR`, so its translation file will
+be `nw_fr_FR.ts`
+
+
+### Edit the Translation File in Qt Linguist
+
+The `i18n/nw_XX.ts` file can be edited with the Qt Linguist application provided by Qt 5. This is
+by far easier than manually editing the `.ts` file.
+
+Please select "English" and "United Kingdom" as the _source_ language if prompted by Qt Linguist.
+
+
+### Verify Your Translation
+
+The application does not use `.ts` files directly. The `novelwriter/assets/i18n/nw_XX.qm` files are
+the actual files used to translate the GUI into another language other than the default British
+English. These files are not generated by default, but they can be built with:
+```bash
+python3 setup.py qtlrelease
+```
+
+You can now test the translation in novelWriter. The Preferences dialog should list the newly added
+language, so go ahead and select it.
+
+
+### Missing QtBase Translations
+
+The default Qt dialogs also have translations, for instance for standard buttons like "Yes", "No",
+"Ok", "Cancel", etc. Generally, these translation files are installed with the Qt libraries on your
+system, and novelWriter will collect those translations from there. However, these translations are
+missing for many languages.
+
+As a starting point, there is no need to translate any entries in the `.ts` files that are under
+elements starting with the letter "Q", like "QPlatformTheme", "QWizard", etc. If these turn up in
+English in novelWriter after activating a translation, it means they are probably missing in the Qt
+library, and you may also need to translate these.
+
+These additional translation entries are generated from a file named `i18n/qtbase.py`, which is not
+a file that novelWriter uses. It is there only to generate these additional entries for the `.ts`
+files.
+
+
+## Project Localisation
+
+Projects can have a different language setting than the GUI itself. The files with format
+`project_XX.json` in `novelwriter/assets/i18n` are simple translation maps for text that goes into
+the exported documents generated by the Build Novel Project tool.
+
+The files are loaded based on the language setting in the Build Novel Project tool. At the present
+time, no other parts of the application use these files. Since these are used as replacement
+lookups, they are maintained as plain JSON files. The main usage is to generate chapter headers as
+number words.
+
+Adding new translations for these files is easy. Just copy the `project_en_GB.json` file, rename it
+to the appropriate language coded filename, and open it in a text editor and edit the content.

i18n/pylupdate6/README.md

@@ -0,0 +1,7 @@
+# PyQt6 Linguist Tool
+
+This is a copy of the `pylupdate` tool from PyQt6 version 6.2.1 from
+[PyPi](https://pypi.org/project/PyQt6/).
+The tool is stripped down to run for novelWriter.
+
+PyQt6 is licensed under GPL 3.0

i18n/pylupdate6/__init__.py

@@ -0,0 +1,22 @@
+# Copyright (c) 2021 Riverbank Computing Limited <info@riverbankcomputing.com>
+#
+# This file is part of PyQt6.
+#
+# This file may be used under the terms of the GNU General Public License
+# version 3.0 as published by the Free Software Foundation and appearing in
+# the file LICENSE included in the packaging of this file.  Please review the
+# following information to ensure the GNU General Public License version 3.0
+# requirements will be met: http://www.gnu.org/copyleft/gpl.html.
+#
+# If you do not wish to use this file under the terms of the GPL version 3.0
+# then you may purchase a commercial license.  For more information contact
+# info@riverbankcomputing.com.
+#
+# This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
+# WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+
+
+# The public API.
+from .lupdate import lupdate
+
+__all__ = ["lupdate"]

i18n/pylupdate6/lupdate.py

@@ -0,0 +1,90 @@
+# Copyright (c) 2021 Riverbank Computing Limited <info@riverbankcomputing.com>
+#
+# This file is part of PyQt6.
+#
+# This file may be used under the terms of the GNU General Public License
+# version 3.0 as published by the Free Software Foundation and appearing in
+# the file LICENSE included in the packaging of this file.  Please review the
+# following information to ensure the GNU General Public License version 3.0
+# requirements will be met: http://www.gnu.org/copyleft/gpl.html.
+#
+# If you do not wish to use this file under the terms of the GPL version 3.0
+# then you may purchase a commercial license.  For more information contact
+# info@riverbankcomputing.com.
+#
+# This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
+# WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+
+
+import fnmatch
+import os
+
+# from .designer_source import DesignerSource
+from .python_source import PythonSource
+from .translation_file import TranslationFile
+from .user import UserException
+
+
+def lupdate(
+    sources, translation_files, no_obsolete=False, no_summary=True, verbose=False, excludes=None
+):
+    """ Update a sequence of translation (.ts) files from a sequence of Python
+    source (.py) files, Designer source (.ui) files or directories containing
+    source files.
+    """
+
+    if excludes is None:
+        excludes = ()
+
+    # Read the .ts files.
+    translations = [
+        TranslationFile(ts, no_obsolete=no_obsolete, no_summary=no_summary, verbose=verbose)
+        for ts in translation_files
+    ]
+
+    # Read the sources.
+    source_files = []
+    for source in sources:
+        if os.path.isdir(source):
+            for dirpath, _, filenames in os.walk(source):
+                for fn in filenames:
+                    # Apply any exclusion patterns.
+                    for exclude in excludes:
+                        if fnmatch.fnmatch(fn, exclude):
+                            fn = None
+                            break
+
+                    if fn is None:
+                        continue
+
+                    filename = os.path.join(dirpath, fn)
+
+                    if filename.endswith('.py'):
+                        source_files.append(PythonSource(filename=filename, verbose=verbose))
+
+                    # UI file support is disabled
+                    # elif filename.endswith('.ui'):
+                    #     source_files.append(
+                    #             DesignerSource(filename=filename,
+                    #                     verbose=verbose))
+
+                    elif verbose:
+                        print("Ignoring", filename)
+
+        elif source.endswith('.py'):
+            source_files.append(PythonSource(filename=source, verbose=verbose))
+
+        # UI file support is disabled
+        # elif source.endswith('.ui'):
+        #     source_files.append(
+        #             DesignerSource(filename=source, verbose=verbose))
+
+        else:
+            raise UserException("{0} must be a directory or a .py or a .ui file".format(source))
+
+    # Update each translation for each source.
+    for t in translations:
+        for s in source_files:
+            t.update(s)
+
+        t.write()

i18n/pylupdate6/python_source.py

@@ -0,0 +1,362 @@
+# Copyright (c) 2021 Riverbank Computing Limited <info@riverbankcomputing.com>
+#
+# This file is part of PyQt6.
+#
+# This file may be used under the terms of the GNU General Public License
+# version 3.0 as published by the Free Software Foundation and appearing in
+# the file LICENSE included in the packaging of this file.  Please review the
+# following information to ensure the GNU General Public License version 3.0
+# requirements will be met: http://www.gnu.org/copyleft/gpl.html.
+#
+# If you do not wish to use this file under the terms of the GPL version 3.0
+# then you may purchase a commercial license.  For more information contact
+# info@riverbankcomputing.com.
+#
+# This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
+# WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+
+
+import ast
+import re
+import tokenize
+
+from .source_file import SourceFile
+from .translations import Context, EmbeddedComments, Message
+from .user import User, UserException
+
+
+class PythonSource(SourceFile, User):
+    """ Encapsulate a Python source file. """
+
+    # The regular expression to extract a PEP 263 encoding.
+    _PEP_263 = re.compile(rb'^[ \t\f]*#.*?coding[:=][ \t]*([-_.a-zA-Z0-9]+)')
+
+    def __init__(self, **kwargs):
+        """ Initialise the object. """
+
+        super().__init__(**kwargs)
+
+        # Read the source file.
+        self.progress("Reading {0}...".format(self.filename))
+        with open(self.filename, 'rb') as f:
+            source = f.read()
+
+        # Implement universal newlines.
+        source = source.replace(b'\r\n', b'\n').replace(b'\r', b'\n')
+
+        # Try and extract a PEP 263 encoding.
+        encoding = 'UTF-8'
+
+        for line_nr, line in enumerate(source.split(b'\n')):
+            if line_nr > 1:
+                break
+
+            match = re.match(self._PEP_263, line)
+            if match:
+                encoding = match.group(1).decode('ascii')
+                break
+
+        # Decode the source according to the encoding.
+        try:
+            source = source.decode(encoding)
+        except LookupError:
+            raise UserException("Unsupported encoding '{0}'".format(encoding))
+
+        # Parse the source file.
+        self.progress("Parsing {0}...".format(self.filename))
+
+        try:
+            tree = ast.parse(source, filename=self.filename)
+        except SyntaxError as e:
+            raise UserException(
+                "Invalid syntax at line {0} of {1}:\n{2}".format(
+                    e.lineno, e.filename, e.text.rstrip()
+                )
+            )
+
+        # Look for translation contexts and their contents.
+        visitor = Visitor(self)
+        visitor.visit(tree)
+
+        # Read the file again as a sequence of tokens so that we see the
+        # comments.
+        with open(self.filename, 'rb') as f:
+            current = None
+
+            for token in tokenize.tokenize(f.readline):
+                if token.type == tokenize.COMMENT:
+                    # See if it is an embedded comment.
+                    parts = token.string.split(' ', maxsplit=1)
+                    if len(parts) == 2:
+                        if parts[0] == '#:':
+                            if current is None:
+                                current = EmbeddedComments()
+
+                            current.extra_comments.append(parts[1])
+                        elif parts[0] == '#=':
+                            if current is None:
+                                current = EmbeddedComments()
+
+                            current.message_id = parts[1]
+                        elif parts[0] == '#~':
+                            parts = parts[1].split(' ', maxsplit=1)
+                            if len(parts) == 1:
+                                parts.append('')
+
+                            if current is None:
+                                current = EmbeddedComments()
+
+                            current.extras.append(parts)
+
+                elif token.type == tokenize.NL:
+                    continue
+
+                elif current is not None:
+                    # Associate the embedded comment with the line containing
+                    # this token.
+                    line_nr = token.start[0]
+
+                    # See if there is a message on that line.
+                    for context in self.contexts:
+                        for message in context.messages:
+                            if message.line_nr == line_nr:
+                                break
+                        else:
+                            message = None
+
+                        if message is not None:
+                            message.embedded_comments = current
+                            break
+
+                    current = None
+
+
+class Visitor(ast.NodeVisitor):
+    """ A visitor that extracts translation contexts. """
+
+    def __init__(self, source):
+        """ Initialise the visitor. """
+
+        self._source = source
+        self._context_stack = []
+
+        super().__init__()
+
+    def visit_Call(self, node):
+        """ Visit a call. """
+
+        # Parse the arguments if a translation function is being called.
+        call_args = None
+
+        if isinstance(node.func, ast.Attribute):
+            name = node.func.attr
+
+            if name == 'tr':
+                call_args = self._parse_tr(node)
+            elif name == 'translate':
+                call_args = self._parse_translate(node)
+
+        elif isinstance(node.func, ast.Name):
+            name = node.func.id
+
+            if name == 'QT_TR_NOOP':
+                call_args = self._parse_QT_TR_NOOP(node)
+            elif name == 'QT_TRANSLATE_NOOP':
+                call_args = self._parse_QT_TRANSLATE_NOOP(node)
+
+        # Update the context if the arguments are usable.
+        if call_args is not None and call_args.source != '':
+            call_args.context.messages.append(
+                Message(
+                    self._source.filename, node.lineno,
+                    call_args.source, call_args.disambiguation,
+                    (call_args.numerus)
+                )
+            )
+
+        self.generic_visit(node)
+
+    def visit_ClassDef(self, node):
+        """ Visit a class. """
+
+        try:
+            name = self._context_stack[-1].name + '.' + node.name
+        except IndexError:
+            name = node.name
+
+        self._context_stack.append(Context(name))
+
+        self.generic_visit(node)
+
+        context = self._context_stack.pop()
+
+        if context.messages:
+            self._source.contexts.append(context)
+
+    def _get_current_context(self):
+        """ Return the current Context object if there is one. """
+
+        return self._context_stack[-1] if self._context_stack else None
+
+    @classmethod
+    def _get_first_str(cls, args):
+        """ Get the first of a list of arguments as a str. """
+
+        # Check that there is at least one argument.
+        if not args:
+            return None
+
+        return cls._get_str(args[0])
+
+    def _get_or_create_context(self, name):
+        """ Return the Context object for a name, creating it if necessary. """
+
+        for context in self._source.contexts:
+            if context.name == name:
+                return context
+
+        context = Context(name)
+        self._source.contexts.append(context)
+
+        return context
+
+    @staticmethod
+    def _get_str(node, allow_none=False):
+        """ Return the str from a node or None if it wasn't an appropriate
+        node.
+        """
+
+        if isinstance(node, ast.Str):
+            return node.s
+
+        if isinstance(node, ast.Constant):
+            if isinstance(node.value, str):
+                return node.value
+
+            if allow_none and node.value is None:
+                return ''
+
+        return None
+
+    def _parse_QT_TR_NOOP(self, node):
+        """ Parse the arguments to QT_TR_NOOP(). """
+
+        # Ignore unless there is a current context.
+        context = self._get_current_context()
+        if context is None:
+            return None
+
+        call_args = self._parse_noop_without_context(node.args, node.keywords)
+        if call_args is None:
+            return None
+
+        call_args.context = context
+
+        return call_args
+
+    def _parse_QT_TRANSLATE_NOOP(self, node):
+        """ Parse the arguments to QT_TRANSLATE_NOOP(). """
+
+        # Get the context.
+        name = self._get_first_str(node.args)
+        if name is None:
+            return None
+
+        call_args = self._parse_noop_without_context(node.args[1:], node.keywords)
+        if call_args is None:
+            return None
+
+        call_args.context = self._get_or_create_context(name)
+
+        return call_args
+
+    def _parse_tr(self, node):
+        """ Parse the arguments to tr(). """
+
+        # Ignore unless there is a current context.
+        context = self._get_current_context()
+        if context is None:
+            return None
+
+        call_args = self._parse_without_context(node.args, node.keywords)
+        if call_args is None:
+            return None
+
+        call_args.context = context
+
+        return call_args
+
+    def _parse_translate(self, node):
+        """ Parse the arguments to translate(). """
+
+        # Get the context.
+        name = self._get_first_str(node.args)
+        if name is None:
+            return None
+
+        call_args = self._parse_without_context(node.args[1:], node.keywords)
+        if call_args is None:
+            return None
+
+        call_args.context = self._get_or_create_context(name)
+
+        return call_args
+
+    def _parse_without_context(self, args, keywords):
+        """ Parse arguments for a message source and optional disambiguation
+        and n.
+        """
+
+        # The source is required.
+        source = self._get_first_str(args)
+        if source is None:
+            return None
+
+        if len(args) > 1:
+            disambiguation = self._get_str(args[1], allow_none=True)
+        else:
+            for kw in keywords:
+                if kw.arg == 'disambiguation':
+                    disambiguation = self._get_str(kw.value, allow_none=True)
+                    break
+            else:
+                disambiguation = ''
+
+        # Ignore if the disambiguation is specified but isn't a string.
+        if disambiguation is None:
+            return None
+
+        if len(args) > 2:
+            numerus = True
+        else:
+            numerus = 'n' in keywords
+
+        if len(args) > 3:
+            return None
+
+        return CallArguments(source, disambiguation, numerus)
+
+    def _parse_noop_without_context(self, args, keywords):
+        """ Parse arguments for a message source. """
+
+        # There must be exactly one positional argument.
+        if len(args) != 1 or len(keywords) != 0:
+            return None
+
+        source = self._get_str(args[0])
+        if source is None:
+            return None
+
+        return CallArguments(source)
+
+
+class CallArguments:
+    """ Encapsulate the possible arguments of a translation function. """
+
+    def __init__(self, source, disambiguation='', numerus=False):
+        """ Initialise the object. """
+
+        self.context = None
+        self.source = source
+        self.disambiguation = disambiguation
+        self.numerus = numerus

i18n/pylupdate6/source_file.py

@@ -0,0 +1,29 @@
+# Copyright (c) 2021 Riverbank Computing Limited <info@riverbankcomputing.com>
+#
+# This file is part of PyQt6.
+#
+# This file may be used under the terms of the GNU General Public License
+# version 3.0 as published by the Free Software Foundation and appearing in
+# the file LICENSE included in the packaging of this file.  Please review the
+# following information to ensure the GNU General Public License version 3.0
+# requirements will be met: http://www.gnu.org/copyleft/gpl.html.
+#
+# If you do not wish to use this file under the terms of the GPL version 3.0
+# then you may purchase a commercial license.  For more information contact
+# info@riverbankcomputing.com.
+#
+# This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
+# WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+
+
+class SourceFile:
+    """ The base class for any source file that provides translation contexts.
+    """
+
+    def __init__(self, filename, **kwargs):
+        """ Initialise the object. """
+
+        super().__init__(**kwargs)
+
+        self.filename = filename
+        self.contexts = []

i18n/pylupdate6/translation_file.py

@@ -0,0 +1,390 @@
+# Copyright (c) 2021 Riverbank Computing Limited <info@riverbankcomputing.com>
+#
+# This file is part of PyQt6.
+#
+# This file may be used under the terms of the GNU General Public License
+# version 3.0 as published by the Free Software Foundation and appearing in
+# the file LICENSE included in the packaging of this file.  Please review the
+# following information to ensure the GNU General Public License version 3.0
+# requirements will be met: http://www.gnu.org/copyleft/gpl.html.
+#
+# If you do not wish to use this file under the terms of the GPL version 3.0
+# then you may purchase a commercial license.  For more information contact
+# info@riverbankcomputing.com.
+#
+# This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
+# WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+
+
+import os
+from xml.etree import ElementTree
+
+from .user import User, UserException
+
+
+class TranslationFile(User):
+    """ Encapsulate a translation file. """
+
+    def __init__(self, ts_file, no_obsolete, no_summary, **kwargs):
+        """ Initialise the translation file. """
+
+        super().__init__(**kwargs)
+
+        if os.path.isfile(ts_file):
+            self.progress("Reading {0}...".format(ts_file))
+
+            try:
+                self._root = ElementTree.parse(ts_file).getroot()
+            except Exception as e:
+                raise UserException(
+                    "{}: {}: {}".format(ts_file, "invalid translation file", str(e))
+                )
+        else:
+            self._root = ElementTree.fromstring(_EMPTY_TS)
+
+        self._ts_file = ts_file
+        self._no_obsolete = no_obsolete
+        self._no_summary = no_summary
+        self._updated_contexts = {}
+
+        # Create a dict of contexts keyed by the context name and having the
+        # list of message elements as the value.
+        self._contexts = {}
+
+        # Also create a dict of existing translations so that they can be
+        # re-used.
+        self._translations = {}
+
+        context_els = []
+        for context_el in self._root:
+            if context_el.tag != 'context':
+                continue
+
+            context_els.append(context_el)
+
+            name = ''
+            message_els = []
+
+            for el in context_el:
+                if el.tag == 'name':
+                    name = el.text
+                elif el.tag == 'message':
+                    message_els.append(el)
+
+            if name:
+                self._contexts[name] = message_els
+
+                for message_el in message_els:
+                    source_el = message_el.find('source')
+                    if source_el is None or not source_el.text:
+                        continue
+
+                    translation_el = message_el.find('translation')
+                    if translation_el is None or not translation_el.text:
+                        continue
+
+                    self._translations[source_el.text] = translation_el.text
+
+        # Remove the context elements but keep everything else in the root
+        # (probably set by Linguist).
+        for context_el in context_els:
+            self._root.remove(context_el)
+
+        # Clear the summary statistics.
+        self._nr_new = 0
+        self._nr_new_duplicates = 0
+        self._nr_new_using_existing_translation = 0
+        self._nr_existing = 0
+        self._nr_kept_obsolete = 0
+        self._nr_discarded_obsolete = 0
+        self._nr_discarded_untranslated = 0
+
+        # Remember all new messages so we can make the summary less confusing
+        # than it otherwise might be.
+        self._new_message_els = []
+
+    def update(self, source):
+        """ Update the translation file from a SourceFile object. """
+
+        self.progress("Updating {0} from {1}...".format(self._ts_file, source.filename))
+
+        for context in source.contexts:
+            # Get the messages that we already know about for this context.
+            try:
+                message_els = self._contexts[context.name]
+            except KeyError:
+                message_els = []
+
+            # Get the messages that have already been updated.
+            updated_message_els = self._get_updated_message_els(context.name)
+
+            for message in context.messages:
+                message_el = self._find_message(message, message_els)
+
+                if message_el is not None:
+                    # Move the message to the updated list.
+                    message_els.remove(message_el)
+                    self._add_message_el(message_el, updated_message_els)
+                else:
+                    # See if this is a new message.  If not then we just have
+                    # another location for an existing message.
+                    message_el = self._find_message(message, updated_message_els)
+
+                if message_el is None:
+                    message_el = self._make_message_el(message)
+                    updated_message_els.append(message_el)
+
+                    self.progress("Added new message '{0}'".format(self.pretty(message.source)))
+                    self._nr_new += 1
+                else:
+                    self.progress("Updated message '{0}'".format(self.pretty(message.source)))
+
+                    # Don't count another copy of a new message as an existing
+                    # one.
+                    if message_el in self._new_message_els:
+                        self._nr_new_duplicates += 1
+                    else:
+                        self._nr_existing += 1
+
+                message_el.insert(0, self._make_location_el(message))
+
+    def write(self):
+        """ Write the translation file back to the filesystem. """
+
+        # If we are keeping obsolete messages then add them to the updated
+        # message elements list.
+        for name, message_els in self._contexts.items():
+            updated_message_els = None
+
+            for message_el in message_els:
+                source = self.pretty(message_el.find('source').text)
+
+                translation_el = message_el.find('translation')
+                if translation_el is not None and translation_el.text:
+                    if self._no_obsolete:
+                        self.progress("Discarded obsolete message '{0}'".format(source))
+                        self._nr_discarded_obsolete += 1
+                    else:
+                        translation_el.set('type', 'vanished')
+
+                        if updated_message_els is None:
+                            updated_message_els = self._get_updated_message_els(name)
+
+                        self._add_message_el(message_el, updated_message_els)
+
+                        self.progress("Kept obsolete message '{0}'".format(source))
+                        self._nr_kept_obsolete += 1
+                else:
+                    self.progress("Discarded untranslated message '{0}'".format(source))
+                    self._nr_discarded_untranslated += 1
+
+        # Created the sorted context elements.
+        for name in sorted(self._updated_contexts.keys()):
+            context_el = ElementTree.Element('context')
+
+            name_el = ElementTree.Element('name')
+            name_el.text = name
+            context_el.append(name_el)
+
+            context_el.extend(self._updated_contexts[name])
+
+            self._root.append(context_el)
+
+        self.progress("Writing {0}...".format(self._ts_file))
+        with open(self._ts_file, 'w', encoding='utf-8', newline='\n') as f:
+            f.write('<?xml version="1.0" encoding="utf-8"?>\n')
+            f.write('<!DOCTYPE TS>\n')
+
+            # Python v3.9 and later.
+            if hasattr(ElementTree, 'indent'):
+                ElementTree.indent(self._root)
+
+            ElementTree.ElementTree(self._root).write(f, encoding='unicode')
+            f.write('\n')
+
+        if not self._no_summary:
+            self._summary()
+
+    @staticmethod
+    def _add_message_el(message_el, updated_message_els):
+        """ Add a message element to a list of updated message elements. """
+
+        # Remove all the location elements.
+        for location_el in message_el.findall('location'):
+            message_el.remove(location_el)
+
+        # Add the message to the updated list.
+        updated_message_els.append(message_el)
+
+    @classmethod
+    def _find_message(cls, message, message_els):
+        """ Return the message element for a message from a list. """
+
+        for message_el in message_els:
+            source = ''
+            comment = ''
+            extra_comment = ''
+            extras = []
+
+            # Extract the data from the element.
+            for el in message_el:
+                if el.tag == 'source':
+                    source = el.text
+                elif el.tag == 'comment':
+                    comment = el.text
+                elif el.tag == 'extracomment':
+                    extra_comment = el.text
+                elif el.tag.startswith('extra-'):
+                    extras.append([el.tag[6:], el.text])
+
+            # Compare with the message.
+            if source != message.source:
+                continue
+
+            if comment != message.comment:
+                continue
+
+            if extra_comment != cls._get_message_extra_comments(message):
+                continue
+
+            if extras != message.embedded_comments.extras:
+                continue
+
+            return message_el
+
+        return None
+
+    @staticmethod
+    def _get_message_extra_comments(message):
+        """ Return a message's extra comments as they appear in a .ts file. """
+
+        return ' '.join(message.embedded_comments.extra_comments)
+
+    def _get_updated_message_els(self, name):
+        """ Return the list of updated message elements for a context. """
+
+        try:
+            updated_message_els = self._updated_contexts[name]
+        except KeyError:
+            updated_message_els = []
+            self._updated_contexts[name] = updated_message_els
+
+        return updated_message_els
+
+    def _make_location_el(self, message):
+        """ Return a 'location' element. """
+
+        return ElementTree.Element(
+            'location',
+            filename=os.path.relpath(
+                message.filename, start=os.path.dirname(os.path.abspath(self._ts_file))
+            ),
+            line=str(message.line_nr)
+        )
+
+    def _make_message_el(self, message):
+        """ Return a 'message' element. """
+
+        attrs = {}
+
+        if message.embedded_comments.message_id:
+            attrs['id'] = message.embedded_comments.message_id
+
+        if message.numerus:
+            attrs['numerus'] = 'yes'
+
+        message_el = ElementTree.Element('message', attrs)
+
+        source_el = ElementTree.Element('source')
+        source_el.text = message.source
+        message_el.append(source_el)
+
+        if message.comment:
+            comment_el = ElementTree.Element('comment')
+            comment_el.text = message.comment
+            message_el.append(comment_el)
+
+        if message.embedded_comments.extra_comments:
+            extracomment_el = ElementTree.Element('extracomment')
+            extracomment_el.text = self._get_message_extra_comments(message)
+            message_el.append(extracomment_el)
+
+        translation_el = ElementTree.Element('translation', type='unfinished')
+
+        # Try and find another message with the same source and use its
+        # translation if it has one.
+        translation = self._translations.get(message.source)
+        if translation:
+            translation_el.text = translation
+
+            self.progress("Reused existing translation for '{0}'".format(
+                self.pretty(message.source))
+            )
+            self._nr_new_using_existing_translation += 1
+
+        if message.numerus:
+            translation_el.append(ElementTree.Element('numerusform'))
+
+        message_el.append(translation_el)
+
+        for field, value in message.embedded_comments.extras:
+            el = ElementTree.Element('extra-' + field)
+            el.text = value
+            message_el.append(el)
+
+        self._new_message_els.append(message_el)
+
+        return message_el
+
+    def _summary(self):
+        """ Display the summary of changes to the user. """
+
+        summary_lines = []
+
+        # Display a line of the summary and the heading if not already done.
+        def summary(line):
+            nonlocal summary_lines
+
+            if not summary_lines:
+                summary_lines.append("Summary of changes to {ts}:".format(ts=self._ts_file))
+
+            summary_lines.append("    " + line)
+
+        if self._nr_new:
+            if self._nr_new_duplicates:
+                summary("{0} new messages were added (and {1} duplicates)".format(
+                        self._nr_new, self._nr_new_duplicates))
+            else:
+                summary("{0} new messages were added".format(self._nr_new))
+
+        if self._nr_new_using_existing_translation:
+            summary("{0} messages reused existing translations".format(
+                    self._nr_new_using_existing_translation))
+
+        if self._nr_existing:
+            summary("{0} existing messages were found".format(
+                    self._nr_existing))
+
+        if self._nr_kept_obsolete:
+            summary("{0} obsolete messages were kept".format(
+                    self._nr_kept_obsolete))
+
+        if self._nr_discarded_obsolete:
+            summary("{0} obsolete messages were discarded".format(
+                    self._nr_discarded_obsolete))
+
+        if self._nr_discarded_untranslated:
+            summary("{0} untranslated messages were discarded".format(
+                    self._nr_discarded_untranslated))
+
+        if not summary_lines:
+            summary_lines.append("{ts} was unchanged".format(ts=self._ts_file))
+
+        print(os.linesep.join(summary_lines))
+
+
+# The XML of an empty .ts file.  This is what a current lupdate will create
+# with an empty C++ source file.
+_EMPTY_TS = '''<TS version="2.1">
+</TS>
+'''

i18n/pylupdate6/translations.py

@@ -0,0 +1,51 @@
+# Copyright (c) 2021 Riverbank Computing Limited <info@riverbankcomputing.com>
+#
+# This file is part of PyQt6.
+#
+# This file may be used under the terms of the GNU General Public License
+# version 3.0 as published by the Free Software Foundation and appearing in
+# the file LICENSE included in the packaging of this file.  Please review the
+# following information to ensure the GNU General Public License version 3.0
+# requirements will be met: http://www.gnu.org/copyleft/gpl.html.
+#
+# If you do not wish to use this file under the terms of the GPL version 3.0
+# then you may purchase a commercial license.  For more information contact
+# info@riverbankcomputing.com.
+#
+# This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
+# WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+
+
+class Context:
+    """ Encapsulate a message context. """
+
+    def __init__(self, name):
+        """ Initialise the context. """
+
+        self.name = name
+        self.messages = []
+
+
+class EmbeddedComments:
+    """ Encapsulate information for a translator embedded in comments. """
+
+    def __init__(self):
+        """ Initialise the object. """
+
+        self.message_id = ''
+        self.extra_comments = []
+        self.extras = []
+
+
+class Message:
+    """ Encapsulate a message. """
+
+    def __init__(self, filename, line_nr, source, comment, numerus):
+        """ Initialise the message. """
+
+        self.filename = filename
+        self.line_nr = line_nr
+        self.source = source
+        self.comment = comment
+        self.numerus = numerus
+        self.embedded_comments = EmbeddedComments()

i18n/pylupdate6/user.py

@@ -0,0 +1,47 @@
+# Copyright (c) 2021 Riverbank Computing Limited <info@riverbankcomputing.com>
+#
+# This file is part of PyQt6.
+#
+# This file may be used under the terms of the GNU General Public License
+# version 3.0 as published by the Free Software Foundation and appearing in
+# the file LICENSE included in the packaging of this file.  Please review the
+# following information to ensure the GNU General Public License version 3.0
+# requirements will be met: http://www.gnu.org/copyleft/gpl.html.
+#
+# If you do not wish to use this file under the terms of the GPL version 3.0
+# then you may purchase a commercial license.  For more information contact
+# info@riverbankcomputing.com.
+#
+# This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
+# WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+
+
+class UserException(Exception):
+    """ Encapsulate an exception ultimate caused by the user. """
+
+    pass
+
+
+class User:
+    """ A mixin that provides methods for communicating with the user. """
+
+    def __init__(self, verbose, **kwargs):
+        """ Initialise the object. """
+
+        super().__init__(**kwargs)
+
+        self._verbose = verbose
+
+    @staticmethod
+    def pretty(text):
+        """ Returns a pretty-fied version of some text suitable for displaying
+        to the user.
+        """
+
+        return text.replace('\n', '\\n')
+
+    def progress(self, message):
+        """ Display a progress message. """
+
+        if self._verbose:
+            print(message)

i18n/qtbase.py

@@ -0,0 +1,65 @@
+"""
+Qt Base Translation File
+========================
+
+This file causes Qt Linguist to generate translation entries for the Qt
+elements that need translation in novelWriter for those languages who do
+not yet have a qtbase_xx.qm file shipped with Qt.
+
+If a qtbase_xx.qm file already exists, do not add a translation for the
+entries generated from this file.
+"""
+
+from PyQt5.QtCore import QT_TRANSLATE_NOOP
+
+# QDialogButtonBox
+# ================
+
+QT_TRANSLATE_NOOP("QDialogButtonBox", "OK")
+
+# QGnomeTheme
+# ===========
+
+QT_TRANSLATE_NOOP("QGnomeTheme", "&OK")
+QT_TRANSLATE_NOOP("QGnomeTheme", "&Save")
+QT_TRANSLATE_NOOP("QGnomeTheme", "&Cancel")
+QT_TRANSLATE_NOOP("QGnomeTheme", "&Close")
+QT_TRANSLATE_NOOP("QGnomeTheme", "Close without Saving")
+
+# QPlatformTheme
+# ==============
+
+QT_TRANSLATE_NOOP("QPlatformTheme", "OK")
+QT_TRANSLATE_NOOP("QPlatformTheme", "Save")
+QT_TRANSLATE_NOOP("QPlatformTheme", "Save All")
+QT_TRANSLATE_NOOP("QPlatformTheme", "Open")
+QT_TRANSLATE_NOOP("QPlatformTheme", "&Yes")
+QT_TRANSLATE_NOOP("QPlatformTheme", "Yes to &All")
+QT_TRANSLATE_NOOP("QPlatformTheme", "&No")
+QT_TRANSLATE_NOOP("QPlatformTheme", "N&o to All")
+QT_TRANSLATE_NOOP("QPlatformTheme", "Abort")
+QT_TRANSLATE_NOOP("QPlatformTheme", "Retry")
+QT_TRANSLATE_NOOP("QPlatformTheme", "Ignore")
+QT_TRANSLATE_NOOP("QPlatformTheme", "Close")
+QT_TRANSLATE_NOOP("QPlatformTheme", "Cancel")
+QT_TRANSLATE_NOOP("QPlatformTheme", "Discard")
+QT_TRANSLATE_NOOP("QPlatformTheme", "Help")
+QT_TRANSLATE_NOOP("QPlatformTheme", "Apply")
+QT_TRANSLATE_NOOP("QPlatformTheme", "Reset")
+QT_TRANSLATE_NOOP("QPlatformTheme", "Restore Defaults")
+
+# QWizard
+# =======
+
+QT_TRANSLATE_NOOP("QWizard", "Go Back")
+QT_TRANSLATE_NOOP("QWizard", "< &Back")
+QT_TRANSLATE_NOOP("QWizard", "Continue")
+QT_TRANSLATE_NOOP("QWizard", "&Next")
+QT_TRANSLATE_NOOP("QWizard", "&Next >")
+QT_TRANSLATE_NOOP("QWizard", "Commit")
+QT_TRANSLATE_NOOP("QWizard", "Done")
+QT_TRANSLATE_NOOP("QWizard", "&Finish")
+QT_TRANSLATE_NOOP("QWizard", "Cancel")
+QT_TRANSLATE_NOOP("QWizard", "Cancel")
+QT_TRANSLATE_NOOP("QWizard", "Help")
+QT_TRANSLATE_NOOP("QWizard", "&Help")

novelWriter.py

@@ -1,5 +1,4 @@
 #!/usr/bin/env python3
-# -*- coding: utf-8 -*-
 """
 novelWriter – Start Script
 ==========================
@@ -8,9 +7,9 @@ import os
 import sys
 
 try:
-    import PyQt5.QtWidgets # noqa: F401
-    import PyQt5.QtGui # noqa: F401
-    import PyQt5.QtCore # noqa: F401
+    import PyQt5.QtWidgets  # noqa: F401
+    import PyQt5.QtGui  # noqa: F401
+    import PyQt5.QtCore  # noqa: F401
 except Exception:
     print("ERROR: Failed to load dependency PyQt5")
     sys.exit(1)
@@ -18,5 +17,5 @@ except Exception:
 os.curdir = os.path.abspath(os.path.dirname(__file__))
 
 if __name__ == "__main__":
-    import nw
-    nw.main(sys.argv[1:])
+    import novelwriter
+    novelwriter.main(sys.argv[1:])

novelwriter/__init__.py

@@ -1,4 +1,3 @@
-# -*- coding: utf-8 -*-
 """
 novelWriter – Init File
 =======================
@@ -8,7 +7,7 @@ File History:
 Created: 2018-09-22 [0.0.1]
 
 This file is a part of novelWriter
-Copyright 2018–2021, Veronica Berglyd Olsen
+Copyright 2018–2022, Veronica Berglyd Olsen
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -28,11 +27,10 @@ import sys
 import getopt
 import logging
 
-from PyQt5.QtGui import QIcon
 from PyQt5.QtWidgets import QApplication, QErrorMessage
 
-from nw.error import exceptionHandler, logException
-from nw.config import Config
+from novelwriter.error import exceptionHandler, logException
+from novelwriter.config import Config
 
 ##
 #  Version Scheme
@@ -40,31 +38,30 @@ from nw.config import Config
 #  Generally follows PEP 440
 #  Hex Version:
 #  - Digit 1,2 : Major Version (01-ff)
-#  = Digit 3,4 : Minor Version (01-ff)
+#  - Digit 3,4 : Minor Version (01-ff)
 #  - Digit 5,6 : Patch Version (01-ff)
-#  = Digit 7   : Release Type (a: aplha, b: beta, c: candidate, f: final)
+#  - Digit 7   : Release Type (a: aplha, b: beta, c: candidate, f: final)
 #  - Digit 8   : Release Number (0-f)
 #
-#  Example    : Full        Short      Description
-# -------------------------------------------------------------------------
-#  0x010200a0 : 1.2-alpha0  1.2a0      Can be used for the dev branch
-#  0x010200a1 : 1.2-alpha1  1.2a1      First alpha release
-#  0x010200b1 : 1.2-beta1   1.2b1      First beta release
-#  0x010200c1 : 1.2-rc1     1.2rc1     First release candidate
-#  0x010200f0 : 1.2         1.2        Final release
-#  0x010200f1 : 1.2-post1   1.2.post1  Post release, but not a code patch!
-#  0x010201f0 : 1.2.1       1.2.1      Patch release
+#  Example    : Full        Short   Description
+# --------------------------------------------------------------------
+#  0x010200a0 : 1.2-alpha0  1.2a0   Use while developing next release
+#  0x010200a1 : 1.2-alpha1  1.2a1   First alpha release
+#  0x010200b1 : 1.2-beta1   1.2b1   First beta release
+#  0x010200c1 : 1.2-rc1     1.2rc1  First release candidate
+#  0x010200f0 : 1.2.0       1.2.0   Final release
+#  0x010201f0 : 1.2.1       1.2.1   Patch release
 ##
 
-__package__    = "nw"
-__copyright__  = "Copyright 2018–2021, Veronica Berglyd Olsen"
+__package__    = "novelwriter"
+__copyright__  = "Copyright 2018–2022, Veronica Berglyd Olsen"
 __license__    = "GPLv3"
 __author__     = "Veronica Berglyd Olsen"
 __maintainer__ = "Veronica Berglyd Olsen"
 __email__      = "code@vkbo.net"
-__version__    = "1.2"
-__hexversion__ = "0x010200f0"
-__date__       = "2021-03-14"
+__version__    = "2.0.2"
+__hexversion__ = "0x020002f0"
+__date__       = "2022-12-01"
 __status__     = "Stable"
 __domain__     = "novelwriter.io"
 __url__        = "https://novelwriter.io"
@@ -73,36 +70,10 @@ __issuesurl__  = "https://github.com/vkbo/novelWriter/issues"
 __helpurl__    = "https://github.com/vkbo/novelWriter/discussions"
 __releaseurl__ = "https://github.com/vkbo/novelWriter/releases/latest"
 __docurl__     = "https://novelwriter.readthedocs.io"
-__credits__    = [
-    "Veronica Berglyd Olsen (developer)",
-    "Marian Lückhof (contributor, tester)"
-]
 
-##
-#  Logging
-# =========
-#  Standard used for logging levels in novelWriter:
-#    CRITICAL  Use for errors that result in termination of the program
-#    ERROR     Use when an action fails, but execution continues
-#    WARNING   When something unexpected, but non-critical happens
-#    INFO      Any useful user information like open, save, exit initiated
-#  ----------- SPAM Threshold : Output above should be minimal -----------------
-#    DEBUG     Use for descriptions of main program flow
-#    VERBOSE   Use for outputting values and program flow details
-##
-
-# Add verbose logging level
-VERBOSE = 5
-logging.addLevelName(VERBOSE, "VERBOSE")
-def logVerbose(self, message, *args, **kws):
-    if self.isEnabledFor(VERBOSE):
-        self._log(VERBOSE, message, args, **kws)
-
-logging.Logger.verbose = logVerbose
-
-# Initiating logging
 logger = logging.getLogger(__name__)
 
+
 ##
 #  Main Program
 ##
@@ -110,20 +81,20 @@ logger = logging.getLogger(__name__)
 # Load the main config as a global object
 CONFIG = Config()
 
+
 def main(sysArgs=None):
-    """Parses command line, sets up logging, and launches main GUI.
+    """Parse command line, set up logging, and launch main GUI.
     """
     if sysArgs is None:
         sysArgs = sys.argv[1:]
 
     # Valid Input Options
     shortOpt = "hv"
-    longOpt  = [
+    longOpt = [
         "help",
         "version",
         "info",
         "debug",
-        "verbose",
         "style=",
         "config=",
         "data=",
@@ -131,44 +102,39 @@ def main(sysArgs=None):
     ]
 
     helpMsg = (
-        "novelWriter {version} ({date})\n"
-        "{copyright}\n"
+        f"novelWriter {__version__} ({__date__})\n"
+        f"{__copyright__}\n"
         "\n"
         "This program is distributed in the hope that it will be useful,\n"
         "but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
         "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-        "GNU General Public License for more details.\n"
+        "GNU General Public Licence for more details.\n"
         "\n"
         "Usage:\n"
         " -h, --help     Print this message.\n"
         " -v, --version  Print program version and exit.\n"
         "     --info     Print additional runtime information.\n"
         "     --debug    Print debug output. Includes --info.\n"
-        "     --verbose  Increase verbosity of debug output. Includes --debug.\n"
         "     --style=   Sets Qt5 style flag. Defaults to 'Fusion'.\n"
         "     --config=  Alternative config file.\n"
         "     --data=    Alternative user data path.\n"
-    ).format(
-        version   = __version__,
-        copyright = __copyright__,
-        date      = __date__,
     )
 
     # Defaults
-    logLevel  = logging.WARN
+    logLevel = logging.WARN
     logFormat = "{levelname:8}  {message:}"
-    confPath  = None
-    dataPath  = None
-    testMode  = False
-    qtStyle   = "Fusion"
-    cmdOpen   = None
+    confPath = None
+    dataPath = None
+    testMode = False
+    qtStyle = "Fusion"
+    cmdOpen = None
 
     # Parse Options
     try:
         inOpts, inRemain = getopt.getopt(sysArgs, shortOpt, longOpt)
-    except getopt.GetoptError as E:
+    except getopt.GetoptError as exc:
         print(helpMsg)
-        print("ERROR: %s" % str(E))
+        print(f"ERROR: {str(exc)}")
         sys.exit(2)
 
     if len(inRemain) > 0:
@@ -185,10 +151,7 @@ def main(sysArgs=None):
             logLevel = logging.INFO
         elif inOpt == "--debug":
             logLevel = logging.DEBUG
-            logFormat  = "[{asctime:}] {name:>22}:{lineno:<4d}  {levelname:8}  {message:}"
-        elif inOpt == "--verbose":
-            logLevel = VERBOSE
-            logFormat  = "[{asctime:}] {name:>22}:{lineno:<4d}  {levelname:8}  {message:}"
+            logFormat  = "[{asctime:}]  {filename:>17}:{lineno:<4d}  {levelname:8}  {message:}"
         elif inOpt == "--style":
             qtStyle = inArg
         elif inOpt == "--config":
@@ -198,9 +161,6 @@ def main(sysArgs=None):
         elif inOpt == "--testmode":
             testMode = True
 
-    # Set Config Options
-    CONFIG.cmdOpen = cmdOpen
-
     # Set Logging
     cHandle = logging.StreamHandler()
     cHandle.setFormatter(logging.Formatter(fmt=logFormat, style="{"))
@@ -209,40 +169,38 @@ def main(sysArgs=None):
     pkgLogger.addHandler(cHandle)
     pkgLogger.setLevel(logLevel)
 
-    logger.info("Starting novelWriter %s (%s) %s" % (
-        __version__, __hexversion__, __date__
-    ))
+    logger.info("Starting novelWriter %s (%s) %s", __version__, __hexversion__, __date__)
 
     # Check Packages and Versions
     errorData = []
     errorCode = 0
-    if sys.hexversion < 0x030600f0:
+    if sys.hexversion < 0x030700f0:
         errorData.append(
-            "At least Python 3.6.0 is required, found %s." % CONFIG.verPyString
+            "At least Python 3.7 is required, found %s" % CONFIG.verPyString
         )
-        errorCode |= 4
-    if CONFIG.verQtValue < 50200:
+        errorCode |= 0x04
+    if CONFIG.verQtValue < 51000:
         errorData.append(
-            "At least Qt5 version 5.2 is required, found %s." % CONFIG.verQtString
+            "At least Qt5 version 5.10 is required, found %s" % CONFIG.verQtString
         )
-        errorCode |= 8
-    if CONFIG.verPyQtValue < 50200:
+        errorCode |= 0x08
+    if CONFIG.verPyQtValue < 51000:
         errorData.append(
-            "At least PyQt5 version 5.2 is required, found %s." % CONFIG.verPyQtString
+            "At least PyQt5 version 5.10 is required, found %s" % CONFIG.verPyQtString
         )
-        errorCode |= 16
+        errorCode |= 0x10
 
     try:
-        import lxml # noqa: F401
+        import lxml  # noqa: F401
     except ImportError:
-        errorData.append("Python module 'lxml' is missing.")
-        errorCode |= 32
+        errorData.append("Python module 'lxml' is missing")
+        errorCode |= 0x20
 
     if errorData:
         errApp = QApplication([])
-        errMsg = QErrorMessage()
-        errMsg.resize(500, 300)
-        errMsg.showMessage((
+        errDlg = QErrorMessage()
+        errDlg.resize(500, 300)
+        errDlg.showMessage((
             "<h3>A critical error has been encountered</h3>"
             "<p>novelWriter cannot start due to the following issues:<p>"
             "<p>&nbsp;-&nbsp;%s</p>"
@@ -250,8 +208,8 @@ def main(sysArgs=None):
         ) % (
             "<br>&nbsp;-&nbsp;".join(errorData)
         ))
-        for errMsg in errorData:
-            logger.critical(errMsg)
+        for errLine in errorData:
+            logger.critical(errLine)
         errApp.exec_()
         sys.exit(errorCode)
 
@@ -264,31 +222,38 @@ def main(sysArgs=None):
             bundle = NSBundle.mainBundle()
             info = bundle.localizedInfoDictionary() or bundle.infoDictionary()
             info["CFBundleName"] = "novelWriter"
-        except ImportError:
+        except Exception:
+            logger.error("Failed to set application name")
+            logException()
+
+    elif CONFIG.osWindows:
+        try:
+            import ctypes
+            appID = f"io.novelwriter.{__version__}"
+            ctypes.windll.shell32.SetCurrentProcessExplicitAppUserModelID(appID)
+        except Exception:
             logger.error("Failed to set application name")
             logException()
 
     # Import GUI (after dependency checks), and launch
-    from nw.guimain import GuiMain
+    from novelwriter.guimain import GuiMain
     if testMode:
         nwGUI = GuiMain()
         return nwGUI
 
     else:
-        nwApp = QApplication([CONFIG.appName, ("-style=%s" % qtStyle)])
+        nwApp = QApplication([CONFIG.appName, (f"-style={qtStyle}")])
         nwApp.setApplicationName(CONFIG.appName)
         nwApp.setApplicationVersion(__version__)
-        nwApp.setWindowIcon(QIcon(CONFIG.appIcon))
         nwApp.setOrganizationDomain(__domain__)
 
         # Connect the exception handler before making the main GUI
         sys.excepthook = exceptionHandler
 
         # Launch main GUI
+        CONFIG.initLocalisation(nwApp)
         nwGUI = GuiMain()
-        if not nwGUI.hasProject:
-            nwGUI.showProjectLoadDialog()
-        nwGUI.releaseNotes()
+        nwGUI.postLaunchTasks(cmdOpen)
 
         sys.exit(nwApp.exec_())
 

novelwriter/assets/i18n/project_de_DE.json

@@ -0,0 +1,105 @@
+{
+  "Synopsis": "Synopsis",
+  "Comment": "Kommentar",
+  "Notes": "Notizen",
+  "0": "Null",
+  "1": "Eins",
+  "2": "Zwei",
+  "3": "Drei",
+  "4": "Vier",
+  "5": "Fünf",
+  "6": "Sechs",
+  "7": "Sieben",
+  "8": "Acht",
+  "9": "Neun",
+  "10": "Zehn",
+  "11": "Elf",
+  "12": "Zwölf",
+  "13": "Dreizehen",
+  "14": "Vierzehn",
+  "15": "Fünfzehn",
+  "16": "Sechzehn",
+  "17": "Siebzehn",
+  "18": "Achtzehn",
+  "19": "Neunzehn",
+  "20": "Zwanzig",
+  "21": "Einundzwanzig",
+  "22": "Zweiundzwanzig",
+  "23": "Dreiundzwanzig",
+  "24": "Vierundzwanzig",
+  "25": "Fünfundzwanzig",
+  "26": "Sechsundzwanzig",
+  "27": "Siebenundzwanzig",
+  "28": "Achtundzwanzig",
+  "29": "Neunundzwanzig",
+  "30": "Dreißig",
+  "31": "Einunddreißig",
+  "32": "Zweiunddreißig",
+  "33": "Dreiunddreißig",
+  "34": "Vierunddreißig",
+  "35": "Fünfunddreißig",
+  "36": "Sechsunddreißig",
+  "37": "Siebenunddreißig",
+  "38": "Achtunddreißig",
+  "39": "Neununddreißig",
+  "40": "Vierzig",
+  "41": "Einundvierzig",
+  "42": "Zweiundvierzig",
+  "43": "Dreiundvierzig",
+  "44": "Vierundvierzig",
+  "45": "Fünfundvierzig",
+  "46": "Sechsundvierzig",
+  "47": "Siebenundvierzig",
+  "48": "Achtundvierzig",
+  "49": "Neunundvierzig",
+  "50": "Fünfzig",
+  "51": "Einundfünfzig",
+  "52": "Zweiundfünfzig",
+  "53": "Dreiundfünfzig",
+  "54": "Vierundfünfzig",
+  "55": "Fünfundfünfzig",
+  "56": "Sechsundfünfzig",
+  "57": "Siebenundfünfzig",
+  "58": "Achtundfünfzig",
+  "59": "Neunundfünfzig",
+  "60": "Sechzig",
+  "61": "Einundsechzig",
+  "62": "Zweiundsechzig",
+  "63": "Dreiundsechzig",
+  "64": "Vierundsechzig",
+  "65": "Fünfundsechzig",
+  "66": "Sechsundsechzig",
+  "67": "Siebenundsechzig",
+  "68": "Achtundsechzig",
+  "69": "Neunundsechzig",
+  "70": "Siebzig",
+  "71": "Einundsiebzig",
+  "72": "Zweiundsiebzig",
+  "73": "Dreiundsiebzig",
+  "74": "Vierundsiebzig",
+  "75": "Fünfundsiebzig",
+  "76": "Sechsundsiebzig",
+  "77": "Siebenundsiebzig",
+  "78": "Achtundsiebzig",
+  "79": "Neunundsiebzig",
+  "80": "Achtzig",
+  "81": "Einundachtzig",
+  "82": "Zweiundachtzig",
+  "83": "Dreiundachtzig",
+  "84": "Vierundachtzig",
+  "85": "Fünfundachtzig",
+  "86": "Sechsundachtzig",
+  "87": "Siebenundachtzig",
+  "88": "Achtundachtzig",
+  "89": "Neunundachtzig",
+  "90": "Neunzig",
+  "91": "Einundneunzig",
+  "92": "Zweiundneunzig",
+  "93": "Dreiundneunzig",
+  "94": "Vierundneunzig",
+  "95": "Fünfundneunzig",
+  "96": "Sechsundneunzig",
+  "97": "Siebenundneunzig",
+  "98": "Achtundneunzig",
+  "99": "Neunundneunzig"
+}

novelwriter/assets/i18n/project_en_GB.json

@@ -0,0 +1,105 @@
+{
+  "Synopsis": "Synopsis",
+  "Comment": "Comment",
+  "Notes": "Notes",
+  "0": "Zero",
+  "1": "One",
+  "2": "Two",
+  "3": "Three",
+  "4": "Four",
+  "5": "Five",
+  "6": "Six",
+  "7": "Seven",
+  "8": "Eight",
+  "9": "Nine",
+  "10": "Ten",
+  "11": "Eleven",
+  "12": "Twelve",
+  "13": "Thirteen",
+  "14": "Fourteen",
+  "15": "Fifteen",
+  "16": "Sixteen",
+  "17": "Seventeen",
+  "18": "Eighteen",
+  "19": "Nineteen",
+  "20": "Twenty",
+  "21": "Twenty-One",
+  "22": "Twenty-Two",
+  "23": "Twenty-Three",
+  "24": "Twenty-Four",
+  "25": "Twenty-Five",
+  "26": "Twenty-Six",
+  "27": "Twenty-Seven",
+  "28": "Twenty-Eight",
+  "29": "Twenty-Nine",
+  "30": "Thirty",
+  "31": "Thirty-One",
+  "32": "Thirty-Two",
+  "33": "Thirty-Three",
+  "34": "Thirty-Four",
+  "35": "Thirty-Five",
+  "36": "Thirty-Six",
+  "37": "Thirty-Seven",
+  "38": "Thirty-Eight",
+  "39": "Thirty-Nine",
+  "40": "Forty",
+  "41": "Forty-One",
+  "42": "Forty-Two",
+  "43": "Forty-Three",
+  "44": "Forty-Four",
+  "45": "Forty-Five",
+  "46": "Forty-Six",
+  "47": "Forty-Seven",
+  "48": "Forty-Eight",
+  "49": "Forty-Nine",
+  "50": "Fifty",
+  "51": "Fifty-One",
+  "52": "Fifty-Two",
+  "53": "Fifty-Three",
+  "54": "Fifty-Four",
+  "55": "Fifty-Five",
+  "56": "Fifty-Six",
+  "57": "Fifty-Seven",
+  "58": "Fifty-Eight",
+  "59": "Fifty-Nine",
+  "60": "Sixty",
+  "61": "Sixty-One",
+  "62": "Sixty-Two",
+  "63": "Sixty-Three",
+  "64": "Sixty-Four",
+  "65": "Sixty-Five",
+  "66": "Sixty-Six",
+  "67": "Sixty-Seven",
+  "68": "Sixty-Eight",
+  "69": "Sixty-Nine",
+  "70": "Seventy",
+  "71": "Seventy-One",
+  "72": "Seventy-Two",
+  "73": "Seventy-Three",
+  "74": "Seventy-Four",
+  "75": "Seventy-Five",
+  "76": "Seventy-Six",
+  "77": "Seventy-Seven",
+  "78": "Seventy-Eight",
+  "79": "Seventy-Nine",
+  "80": "Eighty",
+  "81": "Eighty-One",
+  "82": "Eighty-Two",
+  "83": "Eighty-Three",
+  "84": "Eighty-Four",
+  "85": "Eighty-Five",
+  "86": "Eighty-Six",
+  "87": "Eighty-Seven",
+  "88": "Eighty-Eight",
+  "89": "Eighty-Nine",
+  "90": "Ninety",
+  "91": "Ninety-One",
+  "92": "Ninety-Two",
+  "93": "Ninety-Three",
+  "94": "Ninety-Four",
+  "95": "Ninety-Five",
+  "96": "Ninety-Six",
+  "97": "Ninety-Seven",
+  "98": "Ninety-Eight",
+  "99": "Ninety-Nine"
+}

novelwriter/assets/i18n/project_en_US.json

@@ -0,0 +1,105 @@
+{
+  "Synopsis": "Synopsis",
+  "Comment": "Comment",
+  "Notes": "Notes",
+  "0": "Zero",
+  "1": "One",
+  "2": "Two",
+  "3": "Three",
+  "4": "Four",
+  "5": "Five",
+  "6": "Six",
+  "7": "Seven",
+  "8": "Eight",
+  "9": "Nine",
+  "10": "Ten",
+  "11": "Eleven",
+  "12": "Twelve",
+  "13": "Thirteen",
+  "14": "Fourteen",
+  "15": "Fifteen",
+  "16": "Sixteen",
+  "17": "Seventeen",
+  "18": "Eighteen",
+  "19": "Nineteen",
+  "20": "Twenty",
+  "21": "Twenty-One",
+  "22": "Twenty-Two",
+  "23": "Twenty-Three",
+  "24": "Twenty-Four",
+  "25": "Twenty-Five",
+  "26": "Twenty-Six",
+  "27": "Twenty-Seven",
+  "28": "Twenty-Eight",
+  "29": "Twenty-Nine",
+  "30": "Thirty",
+  "31": "Thirty-One",
+  "32": "Thirty-Two",
+  "33": "Thirty-Three",
+  "34": "Thirty-Four",
+  "35": "Thirty-Five",
+  "36": "Thirty-Six",
+  "37": "Thirty-Seven",
+  "38": "Thirty-Eight",
+  "39": "Thirty-Nine",
+  "40": "Forty",
+  "41": "Forty-One",
+  "42": "Forty-Two",
+  "43": "Forty-Three",
+  "44": "Forty-Four",
+  "45": "Forty-Five",
+  "46": "Forty-Six",
+  "47": "Forty-Seven",
+  "48": "Forty-Eight",
+  "49": "Forty-Nine",
+  "50": "Fifty",
+  "51": "Fifty-One",
+  "52": "Fifty-Two",
+  "53": "Fifty-Three",
+  "54": "Fifty-Four",
+  "55": "Fifty-Five",
+  "56": "Fifty-Six",
+  "57": "Fifty-Seven",
+  "58": "Fifty-Eight",
+  "59": "Fifty-Nine",
+  "60": "Sixty",
+  "61": "Sixty-One",
+  "62": "Sixty-Two",
+  "63": "Sixty-Three",
+  "64": "Sixty-Four",
+  "65": "Sixty-Five",
+  "66": "Sixty-Six",
+  "67": "Sixty-Seven",
+  "68": "Sixty-Eight",
+  "69": "Sixty-Nine",
+  "70": "Seventy",
+  "71": "Seventy-One",
+  "72": "Seventy-Two",
+  "73": "Seventy-Three",
+  "74": "Seventy-Four",
+  "75": "Seventy-Five",
+  "76": "Seventy-Six",
+  "77": "Seventy-Seven",
+  "78": "Seventy-Eight",
+  "79": "Seventy-Nine",
+  "80": "Eighty",
+  "81": "Eighty-One",
+  "82": "Eighty-Two",
+  "83": "Eighty-Three",
+  "84": "Eighty-Four",
+  "85": "Eighty-Five",
+  "86": "Eighty-Six",
+  "87": "Eighty-Seven",
+  "88": "Eighty-Eight",
+  "89": "Eighty-Nine",
+  "90": "Ninety",
+  "91": "Ninety-One",
+  "92": "Ninety-Two",
+  "93": "Ninety-Three",
+  "94": "Ninety-Four",
+  "95": "Ninety-Five",
+  "96": "Ninety-Six",
+  "97": "Ninety-Seven",
+  "98": "Ninety-Eight",
+  "99": "Ninety-Nine"
+}

novelwriter/assets/i18n/project_es_419.json

@@ -0,0 +1,105 @@
+{
+  "Synopsis": "Sinopsis",
+  "Comment": "Comentario",
+  "Notes": "Notas",
+  "0": "Cero",
+  "1": "Uno",
+  "2": "Dos",
+  "3": "Tres",
+  "4": "Cuatro",
+  "5": "Cinco",
+  "6": "Seis",
+  "7": "Siete",
+  "8": "Ocho",
+  "9": "Nueve",
+  "10": "Diez",
+  "11": "Once",
+  "12": "Doce",
+  "13": "Trece",
+  "14": "Catorce",
+  "15": "Quince",
+  "16": "Dieciséis",
+  "17": "Diecisiete",
+  "18": "Dieciocho",
+  "19": "Diecinueve",
+  "20": "Veinte",
+  "21": "Veintiuno",
+  "22": "Veintidós",
+  "23": "Veintitrés",
+  "24": "Veinticuatro",
+  "25": "Veinticinco",
+  "26": "Veintiséis",
+  "27": "Veintisiete",
+  "28": "Veintiocho",
+  "29": "Veintinueve",
+  "30": "Treinta",
+  "31": "Treinta y ",
+  "32": "Treinta y ",
+  "33": "Treinta y ",
+  "34": "Treinta y ",
+  "35": "Treinta y ",
+  "36": "Treinta y ",
+  "37": "Treinta y ",
+  "38": "Treinta y ",
+  "39": "Treinta y ",
+  "40": "Cuarenta",
+  "41": "Cuarenta y uno",
+  "42": "Cuarenta y dos",
+  "43": "Cuarenta y tres",
+  "44": "Cuarenta y cuatro",
+  "45": "Cuarenta y cinco",
+  "46": "Cuarenta y seis",
+  "47": "Cuarenta y siete",
+  "48": "Cuarenta y ocho",
+  "49": "Cuarenta y nueve",
+  "50": "Cincuenta",
+  "51": "Cincuenta y uno",
+  "52": "Cincuenta y dos",
+  "53": "Cincuenta y tres",
+  "54": "Cincuenta y cuatro",
+  "55": "Cincuenta y cinco",
+  "56": "Cincuenta y seis",
+  "57": "Cincuenta y siete",
+  "58": "Cincuenta y ocho",
+  "59": "Cincuenta y nueve",
+  "60": "Sesenta",
+  "61": "Sesenta y uno",
+  "62": "Sesenta y dos",
+  "63": "Sesenta y tres",
+  "64": "Sesenta y cuatro",
+  "65": "Sesenta y cinco",
+  "66": "Sesenta y seis",
+  "67": "Sesenta y siete",
+  "68": "Sesenta y ocho",
+  "69": "Sesenta y nueve",
+  "70": "Setenta",
+  "71": "Setenta y uno",
+  "72": "Setenta y dos",
+  "73": "Setenta y tres",
+  "74": "Setenta y cuatro",
+  "75": "Setenta y cinco",
+  "76": "Setenta y seis",
+  "77": "Setenta y siete",
+  "78": "Setenta y ocho",
+  "79": "Setenta y nueve",
+  "80": "Ochenta",
+  "81": "Ochenta y uno",
+  "82": "Ochenta y dos",
+  "83": "Ochenta y tres",
+  "84": "Ochenta y cuatro",
+  "85": "Ochenta y cinco",
+  "86": "Ochenta y seis",
+  "87": "Ochenta y siete",
+  "88": "Ochenta y ocho",
+  "89": "Ochenta y nueve",
+  "90": "Noventa",
+  "91": "Noventa y uno",
+  "92": "Noventa y dos",
+  "93": "Noventa y tres",
+  "94": "Noventa y cuatro",
+  "95": "Noventa y cinco",
+  "96": "Noventa y seis",
+  "97": "Noventa y siete",
+  "98": "Noventa y ocho",
+  "99": "Noventa y nueve"
+}

novelwriter/assets/i18n/project_fr_FR.json

@@ -0,0 +1,105 @@
+{
+  "Synopsis": "Synopsis",
+  "Comment": "Commentaire",
+  "Notes": "Notes",
+  "0": "Zero",
+  "1": "Un",
+  "2": "Deux",
+  "3": "Trois",
+  "4": "Quatre",
+  "5": "Cinq",
+  "6": "Six",
+  "7": "Sept",
+  "8": "Huit",
+  "9": "Neuf",
+  "10": "Dix",
+  "11": "Onze",
+  "12": "Douze",
+  "13": "Treize",
+  "14": "Quatorze",
+  "15": "Quinze",
+  "16": "Seize",
+  "17": "Dix-sept",
+  "18": "Dix-huit",
+  "19": "Dix-neuf",
+  "20": "Vingt",
+  "21": "Vingt et un",
+  "22": "Vingt-deux",
+  "23": "Vingt-trois",
+  "24": "Vingt-quatre",
+  "25": "Vingt-cinq",
+  "26": "Vingt-six",
+  "27": "Vingt-sept",
+  "28": "Vingt-huit",
+  "29": "Vingt-neuf",
+  "30": "Trente",
+  "31": "Trente et un",
+  "32": "Trente-deux",
+  "33": "Trente-trois",
+  "34": "Trente-quatre",
+  "35": "Trente-cinq",
+  "36": "Trente-six",
+  "37": "Trente-sept",
+  "38": "Trente-huit",
+  "39": "Trente-neuf",
+  "40": "Quarante",
+  "41": "Quarante et un",
+  "42": "Quarante-deux",
+  "43": "Quarante-trois",
+  "44": "Quarante-quatre",
+  "45": "Quarante-cinq",
+  "46": "Quarante-six",
+  "47": "Quarante-sept",
+  "48": "Quarante-huit",
+  "49": "Quarante-neuf",
+  "50": "Cinquante",
+  "51": "Cinquante et un",
+  "52": "Cinquante-deux",
+  "53": "Cinquante-trois",
+  "54": "Cinquante-quatre",
+  "55": "Cinquante-cinq",
+  "56": "Cinquante-six",
+  "57": "Cinquante-sept",
+  "58": "Cinquante-huit",
+  "59": "Cinquante-neuf",
+  "60": "Soixante",
+  "61": "Soixante et un",
+  "62": "Soixante-deux",
+  "63": "Soixante-trois",
+  "64": "Soixante-quatre",
+  "65": "Soixante-cinq",
+  "66": "Soixante-six",
+  "67": "Soixante-sept",
+  "68": "Soixante-huit",
+  "69": "Soixante-neuf",
+  "70": "Soixante-dix",
+  "71": "Soixante et onze",
+  "72": "Soixante-douze",
+  "73": "Soixante-treize",
+  "74": "Soixante-quatorze",
+  "75": "Soixante-quinze",
+  "76": "Soixante-seize",
+  "77": "Soixante-dix-sept",
+  "78": "Soixante-dix-huit",
+  "79": "Soixante-dix-neuf",
+  "80": "Quatre-vingts",
+  "81": "Quatre-vingt-un",
+  "82": "Quatre-vingt-deux",
+  "83": "Quatre-vingt-trois",
+  "84": "Quatre-vingt-quatre",
+  "85": "Quatre-vingt-cinq",
+  "86": "Quatre-vingt-six",
+  "87": "Quatre-vingt-sept",
+  "88": "Quatre-vingt-huit",
+  "89": "Quatre-vingt-neuf",
+  "90": "Quatre-vingt-dix",
+  "91": "Quatre-vingt-onze",
+  "92": "Quatre-vingt-douze",
+  "93": "Quatre-vingt-treize",
+  "94": "Quatre-vingt-quatorze",
+  "95": "Quatre-vingt-quinze",
+  "96": "Quatre-vingt-seize",
+  "97": "Quatre-vingt-dix-sept",
+  "98": "Quatre-vingt-dix-huit",
+  "99": "Quatre-vingt-dix-neuf"
+}

novelwriter/assets/i18n/project_nb_NO.json

@@ -0,0 +1,105 @@
+{
+  "Synopsis": "Sammendrag",
+  "Comment": "Kommentar",
+  "Notes": "Notat",
+  "0": "null",
+  "1": "én",
+  "2": "to",
+  "3": "tre",
+  "4": "fire",
+  "5": "fem",
+  "6": "seks",
+  "7": "sju",
+  "8": "åtte",
+  "9": "ni",
+  "10": "ti",
+  "11": "elleve",
+  "12": "tolv",
+  "13": "tretten",
+  "14": "fjorten",
+  "15": "femten",
+  "16": "seksten",
+  "17": "sytten",
+  "18": "atten",
+  "19": "nitten",
+  "20": "tjue",
+  "21": "tjueén",
+  "22": "tjueto",
+  "23": "tjuetre",
+  "24": "tjuefire",
+  "25": "tjuefem",
+  "26": "tjueseks",
+  "27": "tjuesju",
+  "28": "tjueåtte",
+  "29": "tjueni",
+  "30": "tretti",
+  "31": "trettién",
+  "32": "trettito",
+  "33": "trettitre",
+  "34": "trettifire",
+  "35": "trettifem",
+  "36": "trettiseks",
+  "37": "trettisju",
+  "38": "trettiåtte",
+  "39": "trettini",
+  "40": "førti",
+  "41": "førtién",
+  "42": "førtito",
+  "43": "førtitre",
+  "44": "førtifire",
+  "45": "førtifem",
+  "46": "førtiseks",
+  "47": "førtisju",
+  "48": "førtiåtte",
+  "49": "førtini",
+  "50": "femti",
+  "51": "femtién",
+  "52": "femtito",
+  "53": "femtitre",
+  "54": "femtifire",
+  "55": "femtifem",
+  "56": "femtiseks",
+  "57": "femtisju",
+  "58": "femtiåtte",
+  "59": "femtini",
+  "60": "seksti",
+  "61": "sekstién",
+  "62": "sekstito",
+  "63": "sekstitre",
+  "64": "sekstifire",
+  "65": "sekstifem",
+  "66": "sekstiseks",
+  "67": "sekstisju",
+  "68": "sekstiåtte",
+  "69": "sekstini",
+  "70": "sytti",
+  "71": "syttién",
+  "72": "syttito",
+  "73": "syttitre",
+  "74": "syttifire",
+  "75": "syttifem",
+  "76": "syttiseks",
+  "77": "syttisju",
+  "78": "syttiåtte",
+  "79": "syttini",
+  "80": "åtti",
+  "81": "åttién",
+  "82": "åttito",
+  "83": "åttitre",
+  "84": "åttifire",
+  "85": "åttifem",
+  "86": "åttiseks",
+  "87": "åttisju",
+  "88": "åttiåtte",
+  "89": "åttini",
+  "90": "nitti",
+  "91": "nittién",
+  "92": "nittito",
+  "93": "nittitre",
+  "94": "nittifire",
+  "95": "nittifem",
+  "96": "nittiseks",
+  "97": "nittisju",
+  "98": "nittiåtte",
+  "99": "nittini"
+}

novelwriter/assets/i18n/project_nl_NL.json

@@ -0,0 +1,105 @@
+{
+  "Synopsis": "Synopsis",
+  "Comment": "Opmerking",
+  "Notes": "Notities",
+  "0": "nul",
+  "1": "één",
+  "2": "twee",
+  "3": "drie",
+  "4": "vier",
+  "5": "vijf",
+  "6": "zes",
+  "7": "zeven",
+  "8": "acht",
+  "9": "negen",
+  "10": "tien",
+  "11": "elf",
+  "12": "twaalf",
+  "13": "dertien",
+  "14": "veertien",
+  "15": "vijftien",
+  "16": "zestien",
+  "17": "zeventien",
+  "18": "achttien",
+  "19": "negentien",
+  "20": "twintig",
+  "21": "eenentwintig",
+  "22": "tweeëntwintig",
+  "23": "drieëntwintig",
+  "24": "vierentwintig",
+  "25": "vijfentwintig",
+  "26": "zesentwintig",
+  "27": "zevenentwintig",
+  "28": "achtentwintig",
+  "29": "negenentwintig",
+  "30": "dertig",
+  "31": "eenendertig",
+  "32": "tweeëndertig",
+  "33": "drieëndertig",
+  "34": "vierendertig",
+  "35": "vijfendertig",
+  "36": "zesendertig",
+  "37": "zevenendertig",
+  "38": "achtendertig",
+  "39": "negenendertig",
+  "40": "veertig",
+  "41": "eenenveertig",
+  "42": "tweeënveertig",
+  "43": "drieënveertig",
+  "44": "vierenveertig",
+  "45": "vijfenveertig",
+  "46": "zesenveertig",
+  "47": "zevenenveertig",
+  "48": "achtenveertig",
+  "49": "negenenveertig",
+  "50": "vijftig",
+  "51": "eenenvijftig",
+  "52": "tweeënvijftig",
+  "53": "drieënvijftig",
+  "54": "vierenvijftig",
+  "55": "vijfenvijftig",
+  "56": "zesenvijftig",
+  "57": "zevenenvijftig",
+  "58": "achtenvijftig",
+  "59": "negenenvijftig",
+  "60": "zestig",
+  "61": "eenenzestig",
+  "62": "tweeënzestig",
+  "63": "drieënzestig",
+  "64": "vierenzestig",
+  "65": "vijfenzestig",
+  "66": "zesenzestig",
+  "67": "zevenenzestig",
+  "68": "achtenzestig",
+  "69": "negenenzestig",
+  "70": "zeventig",
+  "71": "eenenzeventig",
+  "72": "tweeënzeventig",
+  "73": "drieënzeventig",
+  "74": "vierenzeventig",
+  "75": "vijfenzeventig",
+  "76": "zesenzeventig",
+  "77": "zevenenzeventig",
+  "78": "achtenzeventig",
+  "79": "negenenzeventig",
+  "80": "tachtig",
+  "81": "eenentachtig",
+  "82": "tweeëntachtig",
+  "83": "drieëntachtig",
+  "84": "vierentachtig",
+  "85": "vijfentachtig",
+  "86": "zesentachtig",
+  "87": "zevenentachtig",
+  "88": "achtentachtig",
+  "89": "negenentachtig",
+  "90": "negentig",
+  "91": "eenennegentig",
+  "92": "tweeënnegentig",
+  "93": "drieënnegentig",
+  "94": "vierennegentig",
+  "95": "vijfennegentig",
+  "96": "zesennegentig",
+  "97": "zevenennegentig",
+  "98": "achtennegentig",
+  "99": "negenennegentig"
+}

novelwriter/assets/i18n/project_nn_NO.json

@@ -0,0 +1,105 @@
+{
+  "Synopsis": "Samandrag",
+  "Comment": "Kommentar",
+  "Notes": "Notat",
+  "0": "null",
+  "1": "ein",
+  "2": "to",
+  "3": "tre",
+  "4": "fire",
+  "5": "fem",
+  "6": "seks",
+  "7": "sju",
+  "8": "åtte",
+  "9": "ni",
+  "10": "ti",
+  "11": "elleve",
+  "12": "tolv",
+  "13": "tretten",
+  "14": "fjorten",
+  "15": "femten",
+  "16": "seksten",
+  "17": "sytten",
+  "18": "atten",
+  "19": "nitten",
+  "20": "tjue",
+  "21": "tjueein",
+  "22": "tjueto",
+  "23": "tjuetre",
+  "24": "tjuefire",
+  "25": "tjuefem",
+  "26": "tjueseks",
+  "27": "tjuesju",
+  "28": "tjueåtte",
+  "29": "tjueni",
+  "30": "tretti",
+  "31": "trettiein",
+  "32": "trettito",
+  "33": "trettitre",
+  "34": "trettifire",
+  "35": "trettifem",
+  "36": "trettiseks",
+  "37": "trettisju",
+  "38": "trettiåtte",
+  "39": "trettini",
+  "40": "førti",
+  "41": "førtiein",
+  "42": "førtito",
+  "43": "førtitre",
+  "44": "førtifire",
+  "45": "førtifem",
+  "46": "førtiseks",
+  "47": "førtisju",
+  "48": "førtiåtte",
+  "49": "førtini",
+  "50": "femti",
+  "51": "femtiein",
+  "52": "femtito",
+  "53": "femtitre",
+  "54": "femtifire",
+  "55": "femtifem",
+  "56": "femtiseks",
+  "57": "femtisju",
+  "58": "femtiåtte",
+  "59": "femtini",
+  "60": "seksti",
+  "61": "sekstiein",
+  "62": "sekstito",
+  "63": "sekstitre",
+  "64": "sekstifire",
+  "65": "sekstifem",
+  "66": "sekstiseks",
+  "67": "sekstisju",
+  "68": "sekstiåtte",
+  "69": "sekstini",
+  "70": "sytti",
+  "71": "syttiein",
+  "72": "syttito",
+  "73": "syttitre",
+  "74": "syttifire",
+  "75": "syttifem",
+  "76": "syttiseks",
+  "77": "syttisju",
+  "78": "syttiåtte",
+  "79": "syttini",
+  "80": "åtti",
+  "81": "åttiein",
+  "82": "åttito",
+  "83": "åttitre",
+  "84": "åttifire",
+  "85": "åttifem",
+  "86": "åttiseks",
+  "87": "åttisju",
+  "88": "åttiåtte",
+  "89": "åttini",
+  "90": "nitti",
+  "91": "nittiein",
+  "92": "nittito",
+  "93": "nittitre",
+  "94": "nittifire",
+  "95": "nittifem",
+  "96": "nittiseks",
+  "97": "nittisju",
+  "98": "nittiåtte",
+  "99": "nittini"
+}

novelwriter/assets/i18n/project_pt_BR.json

@@ -0,0 +1,105 @@
+{
+  "Synopsis": "Sinopse",
+  "Comment": "Comentários",
+  "Notes": "Notas",
+  "0": "Zero",
+  "1": "Um",
+  "2": "Dois",
+  "3": "Três",
+  "4": "Quatro",
+  "5": "Cinco",
+  "6": "Seis",
+  "7": "Sete",
+  "8": "Oito",
+  "9": "Nove",
+  "10": "Dez",
+  "11": "Onze",
+  "12": "Doze",
+  "13": "Treze",
+  "14": "Quatorze",
+  "15": "Quinze",
+  "16": "Dezesseis",
+  "17": "Dezesete",
+  "18": "Dezoito",
+  "19": "Dezenove",
+  "20": "Vinte",
+  "21": "Vinte e Um",
+  "22": "Vinte e Dois",
+  "23": "Vinte e Três",
+  "24": "Vinte e Quatro",
+  "25": "Vinte e Cinco",
+  "26": "Vinte e Seis",
+  "27": "Vinte e Sete",
+  "28": "Vinte e Oito",
+  "29": "Vinte e Nove",
+  "30": "Trinta",
+  "31": "Trinta e Um",
+  "32": "Trinta e Dois",
+  "33": "Trinta e Três",
+  "34": "Trinta e Quatro",
+  "35": "Trinta e Cinco",
+  "36": "Trinta e Seis",
+  "37": "Trinta e Sete",
+  "38": "Trinta e Oito",
+  "39": "Trinta e Nove",
+  "40": "Quarenta",
+  "41": "Quarenta e Um",
+  "42": "Quarenta e Dois",
+  "43": "Quarenta e Três",
+  "44": "Quarenta e Quatro",
+  "45": "Quarenta e Cinco",
+  "46": "Quarenta e Seis",
+  "47": "Quarenta e Sete",
+  "48": "Quarenta e Oito",
+  "49": "Quarenta e Nove",
+  "50": "Cinquenta",
+  "51": "Cinquenta e Um",
+  "52": "Cinquenta e Dois",
+  "53": "Cinquenta e Três",
+  "54": "Cinquenta e Quatro",
+  "55": "Cinquenta e Cinco",
+  "56": "Cinquenta e Seis",
+  "57": "Cinquenta e Sete",
+  "58": "Cinquenta e Oito",
+  "59": "Cinquenta e Nove",
+  "60": "Sessenta",
+  "61": "Sessenta e Um",
+  "62": "Sessenta e Dois",
+  "63": "Sessenta e Três",
+  "64": "Sessenta e Quatro",
+  "65": "Sessenta e Cinco",
+  "66": "Sessenta e Seis",
+  "67": "Sessenta e Sete",
+  "68": "Sessenta e Oito",
+  "69": "Sessenta e Nove",
+  "70": "Setenta",
+  "71": "Setenta e Um",
+  "72": "Setenta e Dois",
+  "73": "Setenta e Três",
+  "74": "Setenta e Quatro",
+  "75": "Setenta e Cinco",
+  "76": "Setenta e Seis",
+  "77": "Setenta e Sete",
+  "78": "Setenta e Oito",
+  "79": "Setenta e Nove",
+  "80": "Oitenta",
+  "81": "Oitenta e Um",
+  "82": "Oitenta e Dois",
+  "83": "Oitenta e Três",
+  "84": "Oitenta e Quatro",
+  "85": "Oitenta e Cinco",
+  "86": "Oitenta e Seis",
+  "87": "Oitenta e Sete",
+  "88": "Oitenta e Oito",
+  "89": "Oitenta e Nove",
+  "90": "Noventa",
+  "91": "Noventa e Um",
+  "92": "Noventa e Dois",
+  "93": "Noventa e Três",
+  "94": "Noventa e Quatro",
+  "95": "Noventa e Cinco",
+  "96": "Noventa e Seis",
+  "97": "Noventa e Sete",
+  "98": "Noventa e Oito",
+  "99": "Noventa e Nove"
+}

novelwriter/assets/i18n/project_zh_CN.json

@@ -0,0 +1,105 @@
+{
+  "Synopsis": "概要",
+  "Comment": "注释",
+  "Notes": "笔记",
+  "0": "零",
+  "1": "一",
+  "2": "二",
+  "3": "三",
+  "4": "四",
+  "5": "五",
+  "6": "六",
+  "7": "七",
+  "8": "八",
+  "9": "九",
+  "10": "十",
+  "11": "十一",
+  "12": "十二",
+  "13": "十三",
+  "14": "十四",
+  "15": "十五",
+  "16": "十六",
+  "17": "十七",
+  "18": "十八",
+  "19": "十九",
+  "20": "二十",
+  "21": "二十一",
+  "22": "二十二",
+  "23": "二十三",
+  "24": "二十四",
+  "25": "二十五",
+  "26": "二十六",
+  "27": "二十七",
+  "28": "二十八",
+  "29": "二十九",
+  "30": "三十",
+  "31": "三十一",
+  "32": "三十二",
+  "33": "三十三",
+  "34": "三十四",
+  "35": "三十五",
+  "36": "三十六",
+  "37": "三十七",
+  "38": "三十八",
+  "39": "三十九",
+  "40": "四十",
+  "41": "四十一",
+  "42": "四十二",
+  "43": "四十三",
+  "44": "四十四",
+  "45": "四十五",
+  "46": "四十六",
+  "47": "四十七",
+  "48": "四十八",
+  "49": "四十九",
+  "50": "五十",
+  "51": "五十一",
+  "52": "五十二",
+  "53": "五十三",
+  "54": "五十四",
+  "55": "五十五",
+  "56": "五十六",
+  "57": "五十七",
+  "58": "五十八",
+  "59": "五十九",
+  "60": "六十",
+  "61": "六十一",
+  "62": "六十二",
+  "63": "六十三",
+  "64": "六十四",
+  "65": "六十五",
+  "66": "六十六",
+  "67": "六十七",
+  "68": "六十八",
+  "69": "六十九",
+  "70": "七十",
+  "71": "七十一",
+  "72": "七十二",
+  "73": "七十三",
+  "74": "七十四",
+  "75": "七十五",
+  "76": "七十六",
+  "77": "七十七",
+  "78": "七十八",
+  "79": "七十九",
+  "80": "八十",
+  "81": "八十一",
+  "82": "八十二",
+  "83": "八十三",
+  "84": "八十四",
+  "85": "八十五",
+  "86": "八十六",
+  "87": "八十七",
+  "88": "八十八",
+  "89": "八十九",
+  "90": "九十",
+  "91": "九十一",
+  "92": "九十二",
+  "93": "九十三",
+  "94": "九十四",
+  "95": "九十五",
+  "96": "九十六",
+  "97": "九十七",
+  "98": "九十八",
+  "99": "九十九"
+}

novelwriter/assets/icons/typicons_dark/README.md

@@ -0,0 +1,29 @@
+# Typicons for Dark Backgrounds
+
+This theme is based on Typicons. All files are prefixed, depending on whether they are based
+directly on original Typicons, redesigned, or designed from scratch.
+
+## Typicons Icons
+
+The files have a `typ_` prefix. These are colourised and rescaled Typicons, but with no other
+modifications.
+
+Copyright: Stephen Hutchings  
+Source: https://github.com/stephenhutchings/typicons.font  
+License: [CC BY-SA 4.0](https://creativecommons.org/licenses/by-sa/4.0/)  
+
+## Original Icons
+
+The files have a `nw_` prefix. These are made completely from scratch for novelWriter and are not
+using any design elements from Typicons.
+
+Copyright: Veronica Berglyd Olsen  
+License: [CC BY-SA 4.0](https://creativecommons.org/licenses/by-sa/4.0/)  
+
+## Mixed Icons
+
+The files have a `mixed_` prefix. These are redesigned from Typicons components, modified from
+Typicons, or consist of a mix of Typicons and new elements.
+
+Copyright: Stephen Hutchings, Veronica Berglyd Olsen  
+License: [CC BY-SA 4.0](https://creativecommons.org/licenses/by-sa/4.0/)  

novelwriter/assets/icons/typicons_dark/icons.conf

@@ -0,0 +1,86 @@
+##
+# Icons:     Typicons Dark
+# Source:    https://github.com/stephenhutchings/typicons.font
+# Credit:    Stephen Hutchings
+# Modified:  Veronica Berglyd Olsen
+# Additions: hash.svg
+##
+
+[Main]
+name        = Typicons Dark
+description = Colourised icons for dark GUI theme based on Typicons.
+author      = Veronica Berglyd Olsen (adaptation)
+credit      = Stephen Hutchings (icon design)
+url         = https://github.com/stephenhutchings/typicons.font
+license     = CC BY-SA 4.0
+licenseurl  = https://creativecommons.org/licenses/by-sa/4.0/
+
+[Map]
+add             = typ_plus.svg
+backward        = typ_chevron-left.svg
+bookmark        = typ_bookmark.svg
+bullet-off      = typ_media-record-outline.svg
+bullet-on       = typ_media-record.svg
+checked         = mixed_input-checked.svg
+close           = typ_times.svg
+cls_archive     = typ_delete.svg
+cls_character   = typ_user.svg
+cls_custom      = typ_star.svg
+cls_entity      = typ_flag.svg
+cls_none        = typ_cancel.svg
+cls_novel       = typ_book.svg
+cls_object      = typ_key.svg
+cls_plot        = typ_puzzle.svg
+cls_timeline    = typ_calendar.svg
+cls_trash       = typ_trash.svg
+cls_world       = typ_location.svg
+cross           = typ_times.svg
+down            = typ_chevron-down.svg
+edit            = typ_pencil.svg
+forward         = typ_chevron-right.svg
+maximise        = typ_arrow-maximise.svg
+menu            = typ_th-menu.svg
+minimise        = typ_arrow-minimise.svg
+noncheckable    = mixed_input-none.svg
+proj_chapter    = mixed_document-chapter.svg
+proj_details    = typ_th-list-grey.svg
+proj_document   = typ_document-text.svg
+proj_folder     = typ_folder.svg
+proj_note       = mixed_document-note.svg
+proj_scene      = mixed_document-scene.svg
+proj_section    = mixed_document-section.svg
+proj_stats      = typ_chart-bar-grey.svg
+proj_title      = mixed_document-title.svg
+reference       = typ_at.svg
+refresh         = typ_refresh.svg
+remove          = typ_minus.svg
+search          = typ_search.svg
+search_cancel   = typ_cancel-grey.svg
+search_case     = nw_search-case.svg
+search_loop     = typ_arrow-repeat-grey.svg
+search_preserve = nw_search-preserve.svg
+search_project  = typ_arrow-down-thick-grey.svg
+search_regex    = nw_search-regex.svg
+search_replace  = mixed_search-replace.svg
+search_word     = nw_search-word.svg
+settings        = typ_cog.svg
+status_idle     = typ_media-pause-grey.svg
+status_lang     = typ_globe-grey.svg
+status_lines    = typ_th-list-grey.svg
+status_stats    = typ_chart-bar-grey.svg
+status_time     = typ_stopwatch-grey.svg
+sticky-off      = typ_pin-outline.svg
+sticky-on       = typ_pin.svg
+unchecked       = mixed_input-unchecked.svg
+up              = typ_chevron-up.svg
+view_build      = typ_export.svg
+view_editor     = mixed_edit.svg
+view_novel      = typ_book-grey.svg
+view_outline    = typ_puzzle-outline.svg
+
+deco_doc_h0     = nw_deco-h0.svg
+deco_doc_h1     = nw_deco-h1.svg
+deco_doc_h2     = nw_deco-h2.svg
+deco_doc_h3     = nw_deco-h3.svg
+deco_doc_h4     = nw_deco-h4.svg
+deco_doc_more   = nw_deco-noveltree-more.svg

novelwriter/assets/icons/typicons_dark/mixed_document-chapter.svg

@@ -0,0 +1,47 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   version="1.2"
+   width="24"
+   height="24"
+   viewBox="0 0 24 24"
+   id="svg2161">
+  <metadata
+     id="metadata2167">
+    <rdf:RDF>
+      <cc:Work
+         rdf:about="">
+        <dc:format>image/svg+xml</dc:format>
+        <dc:type
+           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+        <dc:title></dc:title>
+      </cc:Work>
+    </rdf:RDF>
+  </metadata>
+  <defs
+     id="defs2165" />
+  <path
+     id="rect12986"
+     style="display:inline;opacity:0.95;fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:1.88635;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+     d="M 5.8886719 3.4453125 C 5.2152275 3.4453125 4.6660156 3.9925712 4.6660156 4.6660156 L 4.6660156 19.333984 C 4.6660156 20.007428 5.2152275 20.554687 5.8886719 20.554688 L 18.111328 20.554688 C 18.784774 20.554688 19.333984 20.007428 19.333984 19.333984 L 19.333984 4.6660156 C 19.333984 3.9925712 18.784774 3.4453125 18.111328 3.4453125 L 5.8886719 3.4453125 z " />
+  <path
+     id="rect935"
+     style="fill:#d64848;fill-opacity:1;stroke-width:0;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:0.2"
+     d="M 5.8886719 3.4453125 C 5.2152275 3.4453125 4.6660156 3.9925712 4.6660156 4.6660156 L 4.6660156 6 L 4.6660156 7.1894531 L 4.6660156 10.058594 L 19.333984 10.058594 L 19.333984 7.1894531 L 19.333984 6 L 19.333984 4.6660156 C 19.333984 3.9925712 18.784774 3.4453125 18.111328 3.4453125 L 5.8886719 3.4453125 z " />
+  <path
+     id="path2157"
+     style="display:inline;fill:#595959;fill-opacity:1;stroke-width:1.22222"
+     d="M 7.1113281,13.222656 C 6.7739949,13.222656 6.5,13.49665 6.5,13.833984 c 0,0.337332 0.2739949,0.611328 0.6113281,0.611328 h 9.7773439 c 0.337334,1e-6 0.611328,-0.273996 0.611328,-0.611328 0,-0.337334 -0.273994,-0.611328 -0.611328,-0.611328 z m 0,3.666016 C 6.7739949,16.888672 6.5,17.162666 6.5,17.5 c 0,0.337334 0.2739949,0.611328 0.6113281,0.611328 H 16.888672 C 17.226006,18.111328 17.5,17.837334 17.5,17.5 c 0,-0.337334 -0.273994,-0.611328 -0.611328,-0.611328 z" />
+  <path
+     id="path902"
+     style="display:inline;fill:#848484;fill-opacity:1;stroke-width:1.22222"
+     d="M 5.8886719,1 C 3.8671165,1 2.2226562,2.6444602 2.2226562,4.6660156 V 19.333984 C 2.2226563,21.355538 3.8671165,23 5.8886719,23 H 18.111328 c 2.021556,0 3.666016,-1.644462 3.666016,-3.666016 V 4.6660156 C 21.777344,2.6444602 20.132884,1 18.111328,1 Z m 0,2.4453125 H 18.111328 c 0.673446,0 1.222656,0.5472587 1.222656,1.2207031 V 19.333984 c 0,0.673444 -0.54921,1.220704 -1.222656,1.220704 H 5.8886719 c -0.6734444,-10e-7 -1.2226563,-0.54726 -1.2226563,-1.220704 V 4.6660156 c 0,-0.6734444 0.5492119,-1.2207031 1.2226563,-1.2207031 z" />
+  <path
+     id="path2157-0"
+     style="display:inline;fill:#ffffff;fill-opacity:1;stroke-width:1.22222"
+     d="M 7.1113281 5.8886719 C 6.7739949 5.8886719 6.5 6.1626667 6.5 6.5 C 6.5 6.837334 6.7739949 7.1113281 7.1113281 7.1113281 L 16.888672 7.1113281 C 17.226006 7.1113281 17.5 6.837334 17.5 6.5 C 17.5 6.1626667 17.226006 5.8886719 16.888672 5.8886719 L 7.1113281 5.8886719 z " />
+</svg>

novelwriter/assets/icons/typicons_dark/mixed_document-note.svg

@@ -0,0 +1,47 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   version="1.2"
+   width="24"
+   height="24"
+   viewBox="0 0 24 24"
+   id="svg2161">
+  <metadata
+     id="metadata2167">
+    <rdf:RDF>
+      <cc:Work
+         rdf:about="">
+        <dc:format>image/svg+xml</dc:format>
+        <dc:type
+           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+        <dc:title></dc:title>
+      </cc:Work>
+    </rdf:RDF>
+  </metadata>
+  <defs
+     id="defs2165" />
+  <path
+     id="rect12986"
+     style="display:inline;opacity:0.95;fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:1.88635;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+     d="M 5.8886719 3.4453125 C 5.2152275 3.4453125 4.6660156 3.9925712 4.6660156 4.6660156 L 4.6660156 19.333984 C 4.6660156 20.007428 5.2152275 20.554687 5.8886719 20.554688 L 18.111328 20.554688 C 18.784774 20.554688 19.333984 20.007428 19.333984 19.333984 L 19.333984 4.6660156 C 19.333984 3.9925712 18.784774 3.4453125 18.111328 3.4453125 L 5.8886719 3.4453125 z " />
+  <path
+     id="rect935"
+     style="fill:#ffff84;fill-opacity:1;stroke-width:0;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:0.2"
+     d="M 5.8886719 3.4453125 C 5.2152275 3.4453125 4.6660156 3.9925712 4.6660156 4.6660156 L 4.6660156 6 L 4.6660156 7.1894531 L 4.6660156 10.058594 L 19.333984 10.058594 L 19.333984 7.1894531 L 19.333984 6 L 19.333984 4.6660156 C 19.333984 3.9925712 18.784774 3.4453125 18.111328 3.4453125 L 5.8886719 3.4453125 z " />
+  <path
+     id="path2157"
+     style="display:inline;fill:#595959;fill-opacity:1;stroke-width:1.22222"
+     d="M 7.1113281,13.222656 C 6.7739949,13.222656 6.5,13.49665 6.5,13.833984 c 0,0.337332 0.2739949,0.611328 0.6113281,0.611328 h 9.7773439 c 0.337334,1e-6 0.611328,-0.273996 0.611328,-0.611328 0,-0.337334 -0.273994,-0.611328 -0.611328,-0.611328 z m 0,3.666016 C 6.7739949,16.888672 6.5,17.162666 6.5,17.5 c 0,0.337334 0.2739949,0.611328 0.6113281,0.611328 H 16.888672 C 17.226006,18.111328 17.5,17.837334 17.5,17.5 c 0,-0.337334 -0.273994,-0.611328 -0.611328,-0.611328 z" />
+  <path
+     id="path902"
+     style="display:inline;fill:#848484;fill-opacity:1;stroke-width:1.22222"
+     d="M 5.8886719,1 C 3.8671165,1 2.2226562,2.6444602 2.2226562,4.6660156 V 19.333984 C 2.2226563,21.355538 3.8671165,23 5.8886719,23 H 18.111328 c 2.021556,0 3.666016,-1.644462 3.666016,-3.666016 V 4.6660156 C 21.777344,2.6444602 20.132884,1 18.111328,1 Z m 0,2.4453125 H 18.111328 c 0.673446,0 1.222656,0.5472587 1.222656,1.2207031 V 19.333984 c 0,0.673444 -0.54921,1.220704 -1.222656,1.220704 H 5.8886719 c -0.6734444,-10e-7 -1.2226563,-0.54726 -1.2226563,-1.220704 V 4.6660156 c 0,-0.6734444 0.5492119,-1.2207031 1.2226563,-1.2207031 z" />
+  <path
+     id="path2157-0"
+     style="display:inline;fill:#ffffff;fill-opacity:1;stroke-width:1.22222"
+     d="M 7.1113281 5.8886719 C 6.7739949 5.8886719 6.5 6.1626667 6.5 6.5 C 6.5 6.837334 6.7739949 7.1113281 7.1113281 7.1113281 L 16.888672 7.1113281 C 17.226006 7.1113281 17.5 6.837334 17.5 6.5 C 17.5 6.1626667 17.226006 5.8886719 16.888672 5.8886719 L 7.1113281 5.8886719 z " />
+</svg>

novelwriter/assets/icons/typicons_dark/mixed_document-scene.svg

@@ -0,0 +1,47 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   version="1.2"
+   width="24"
+   height="24"
+   viewBox="0 0 24 24"
+   id="svg2161">
+  <metadata
+     id="metadata2167">
+    <rdf:RDF>
+      <cc:Work
+         rdf:about="">
+        <dc:format>image/svg+xml</dc:format>
+        <dc:type
+           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+        <dc:title></dc:title>
+      </cc:Work>
+    </rdf:RDF>
+  </metadata>
+  <defs
+     id="defs2165" />
+  <path
+     id="rect12986"
+     style="display:inline;opacity:0.95;fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:1.88635;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+     d="M 5.8886719 3.4453125 C 5.2152275 3.4453125 4.6660156 3.9925712 4.6660156 4.6660156 L 4.6660156 19.333984 C 4.6660156 20.007428 5.2152275 20.554687 5.8886719 20.554688 L 18.111328 20.554688 C 18.784774 20.554688 19.333984 20.007428 19.333984 19.333984 L 19.333984 4.6660156 C 19.333984 3.9925712 18.784774 3.4453125 18.111328 3.4453125 L 5.8886719 3.4453125 z " />
+  <path
+     id="rect935"
+     style="fill:#6699cc;fill-opacity:1;stroke-width:0;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:0.2"
+     d="M 5.8886719 3.4453125 C 5.2152275 3.4453125 4.6660156 3.9925712 4.6660156 4.6660156 L 4.6660156 6 L 4.6660156 7.1894531 L 4.6660156 10.058594 L 19.333984 10.058594 L 19.333984 7.1894531 L 19.333984 6 L 19.333984 4.6660156 C 19.333984 3.9925712 18.784774 3.4453125 18.111328 3.4453125 L 5.8886719 3.4453125 z " />
+  <path
+     id="path2157"
+     style="display:inline;fill:#595959;fill-opacity:1;stroke-width:1.22222"
+     d="M 7.1113281,13.222656 C 6.7739949,13.222656 6.5,13.49665 6.5,13.833984 c 0,0.337332 0.2739949,0.611328 0.6113281,0.611328 h 9.7773439 c 0.337334,1e-6 0.611328,-0.273996 0.611328,-0.611328 0,-0.337334 -0.273994,-0.611328 -0.611328,-0.611328 z m 0,3.666016 C 6.7739949,16.888672 6.5,17.162666 6.5,17.5 c 0,0.337334 0.2739949,0.611328 0.6113281,0.611328 H 16.888672 C 17.226006,18.111328 17.5,17.837334 17.5,17.5 c 0,-0.337334 -0.273994,-0.611328 -0.611328,-0.611328 z" />
+  <path
+     id="path902"
+     style="display:inline;fill:#848484;fill-opacity:1;stroke-width:1.22222"
+     d="M 5.8886719,1 C 3.8671165,1 2.2226562,2.6444602 2.2226562,4.6660156 V 19.333984 C 2.2226563,21.355538 3.8671165,23 5.8886719,23 H 18.111328 c 2.021556,0 3.666016,-1.644462 3.666016,-3.666016 V 4.6660156 C 21.777344,2.6444602 20.132884,1 18.111328,1 Z m 0,2.4453125 H 18.111328 c 0.673446,0 1.222656,0.5472587 1.222656,1.2207031 V 19.333984 c 0,0.673444 -0.54921,1.220704 -1.222656,1.220704 H 5.8886719 c -0.6734444,-10e-7 -1.2226563,-0.54726 -1.2226563,-1.220704 V 4.6660156 c 0,-0.6734444 0.5492119,-1.2207031 1.2226563,-1.2207031 z" />
+  <path
+     id="path2157-0"
+     style="display:inline;fill:#ffffff;fill-opacity:1;stroke-width:1.22222"
+     d="M 7.1113281 5.8886719 C 6.7739949 5.8886719 6.5 6.1626667 6.5 6.5 C 6.5 6.837334 6.7739949 7.1113281 7.1113281 7.1113281 L 16.888672 7.1113281 C 17.226006 7.1113281 17.5 6.837334 17.5 6.5 C 17.5 6.1626667 17.226006 5.8886719 16.888672 5.8886719 L 7.1113281 5.8886719 z " />
+</svg>

novelwriter/assets/icons/typicons_dark/mixed_document-section.svg

@@ -0,0 +1,47 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   version="1.2"
+   width="24"
+   height="24"
+   viewBox="0 0 24 24"
+   id="svg2161">
+  <metadata
+     id="metadata2167">
+    <rdf:RDF>
+      <cc:Work
+         rdf:about="">
+        <dc:format>image/svg+xml</dc:format>
+        <dc:type
+           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+        <dc:title></dc:title>
+      </cc:Work>
+    </rdf:RDF>
+  </metadata>
+  <defs
+     id="defs2165" />
+  <path
+     id="rect12986"
+     style="display:inline;opacity:0.95;fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:1.88635;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+     d="M 5.8886719 3.4453125 C 5.2152275 3.4453125 4.6660156 3.9925712 4.6660156 4.6660156 L 4.6660156 19.333984 C 4.6660156 20.007428 5.2152275 20.554687 5.8886719 20.554688 L 18.111328 20.554688 C 18.784774 20.554688 19.333984 20.007428 19.333984 19.333984 L 19.333984 4.6660156 C 19.333984 3.9925712 18.784774 3.4453125 18.111328 3.4453125 L 5.8886719 3.4453125 z " />
+  <path
+     id="rect935"
+     style="fill:#999999;fill-opacity:1;stroke-width:0;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:0.2"
+     d="M 5.8886719 3.4453125 C 5.2152275 3.4453125 4.6660156 3.9925712 4.6660156 4.6660156 L 4.6660156 6 L 4.6660156 7.1894531 L 4.6660156 10.058594 L 19.333984 10.058594 L 19.333984 7.1894531 L 19.333984 6 L 19.333984 4.6660156 C 19.333984 3.9925712 18.784774 3.4453125 18.111328 3.4453125 L 5.8886719 3.4453125 z " />
+  <path
+     id="path2157"
+     style="display:inline;fill:#595959;fill-opacity:1;stroke-width:1.22222"
+     d="M 7.1113281,13.222656 C 6.7739949,13.222656 6.5,13.49665 6.5,13.833984 c 0,0.337332 0.2739949,0.611328 0.6113281,0.611328 h 9.7773439 c 0.337334,1e-6 0.611328,-0.273996 0.611328,-0.611328 0,-0.337334 -0.273994,-0.611328 -0.611328,-0.611328 z m 0,3.666016 C 6.7739949,16.888672 6.5,17.162666 6.5,17.5 c 0,0.337334 0.2739949,0.611328 0.6113281,0.611328 H 16.888672 C 17.226006,18.111328 17.5,17.837334 17.5,17.5 c 0,-0.337334 -0.273994,-0.611328 -0.611328,-0.611328 z" />
+  <path
+     id="path902"
+     style="display:inline;fill:#848484;fill-opacity:1;stroke-width:1.22222"
+     d="M 5.8886719,1 C 3.8671165,1 2.2226562,2.6444602 2.2226562,4.6660156 V 19.333984 C 2.2226563,21.355538 3.8671165,23 5.8886719,23 H 18.111328 c 2.021556,0 3.666016,-1.644462 3.666016,-3.666016 V 4.6660156 C 21.777344,2.6444602 20.132884,1 18.111328,1 Z m 0,2.4453125 H 18.111328 c 0.673446,0 1.222656,0.5472587 1.222656,1.2207031 V 19.333984 c 0,0.673444 -0.54921,1.220704 -1.222656,1.220704 H 5.8886719 c -0.6734444,-10e-7 -1.2226563,-0.54726 -1.2226563,-1.220704 V 4.6660156 c 0,-0.6734444 0.5492119,-1.2207031 1.2226563,-1.2207031 z" />
+  <path
+     id="path2157-0"
+     style="display:inline;fill:#ffffff;fill-opacity:1;stroke-width:1.22222"
+     d="M 7.1113281 5.8886719 C 6.7739949 5.8886719 6.5 6.1626667 6.5 6.5 C 6.5 6.837334 6.7739949 7.1113281 7.1113281 7.1113281 L 16.888672 7.1113281 C 17.226006 7.1113281 17.5 6.837334 17.5 6.5 C 17.5 6.1626667 17.226006 5.8886719 16.888672 5.8886719 L 7.1113281 5.8886719 z " />
+</svg>

novelwriter/assets/icons/typicons_dark/mixed_document-title.svg

@@ -0,0 +1,47 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   version="1.2"
+   width="24"
+   height="24"
+   viewBox="0 0 24 24"
+   id="svg2161">
+  <metadata
+     id="metadata2167">
+    <rdf:RDF>
+      <cc:Work
+         rdf:about="">
+        <dc:format>image/svg+xml</dc:format>
+        <dc:type
+           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+        <dc:title></dc:title>
+      </cc:Work>
+    </rdf:RDF>
+  </metadata>
+  <defs
+     id="defs2165" />
+  <path
+     id="rect12986"
+     style="display:inline;opacity:0.95;fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:1.88635;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+     d="M 5.8886719 3.4453125 C 5.2152275 3.4453125 4.6660156 3.9925712 4.6660156 4.6660156 L 4.6660156 19.333984 C 4.6660156 20.007428 5.2152275 20.554687 5.8886719 20.554688 L 18.111328 20.554688 C 18.784774 20.554688 19.333984 20.007428 19.333984 19.333984 L 19.333984 4.6660156 C 19.333984 3.9925712 18.784774 3.4453125 18.111328 3.4453125 L 5.8886719 3.4453125 z " />
+  <path
+     id="rect935"
+     style="fill:#99cc99;fill-opacity:1;stroke-width:0;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:0.2"
+     d="M 5.8886719 3.4453125 C 5.2152275 3.4453125 4.6660156 3.9925712 4.6660156 4.6660156 L 4.6660156 6 L 4.6660156 7.1894531 L 4.6660156 10.058594 L 19.333984 10.058594 L 19.333984 7.1894531 L 19.333984 6 L 19.333984 4.6660156 C 19.333984 3.9925712 18.784774 3.4453125 18.111328 3.4453125 L 5.8886719 3.4453125 z " />
+  <path
+     id="path2157"
+     style="display:inline;fill:#595959;fill-opacity:1;stroke-width:1.22222"
+     d="M 7.1113281,13.222656 C 6.7739949,13.222656 6.5,13.49665 6.5,13.833984 c 0,0.337332 0.2739949,0.611328 0.6113281,0.611328 h 9.7773439 c 0.337334,1e-6 0.611328,-0.273996 0.611328,-0.611328 0,-0.337334 -0.273994,-0.611328 -0.611328,-0.611328 z m 0,3.666016 C 6.7739949,16.888672 6.5,17.162666 6.5,17.5 c 0,0.337334 0.2739949,0.611328 0.6113281,0.611328 H 16.888672 C 17.226006,18.111328 17.5,17.837334 17.5,17.5 c 0,-0.337334 -0.273994,-0.611328 -0.611328,-0.611328 z" />
+  <path
+     id="path902"
+     style="display:inline;fill:#848484;fill-opacity:1;stroke-width:1.22222"
+     d="M 5.8886719,1 C 3.8671165,1 2.2226562,2.6444602 2.2226562,4.6660156 V 19.333984 C 2.2226563,21.355538 3.8671165,23 5.8886719,23 H 18.111328 c 2.021556,0 3.666016,-1.644462 3.666016,-3.666016 V 4.6660156 C 21.777344,2.6444602 20.132884,1 18.111328,1 Z m 0,2.4453125 H 18.111328 c 0.673446,0 1.222656,0.5472587 1.222656,1.2207031 V 19.333984 c 0,0.673444 -0.54921,1.220704 -1.222656,1.220704 H 5.8886719 c -0.6734444,-10e-7 -1.2226563,-0.54726 -1.2226563,-1.220704 V 4.6660156 c 0,-0.6734444 0.5492119,-1.2207031 1.2226563,-1.2207031 z" />
+  <path
+     id="path2157-0"
+     style="display:inline;fill:#ffffff;fill-opacity:1;stroke-width:1.22222"
+     d="M 7.1113281 5.8886719 C 6.7739949 5.8886719 6.5 6.1626667 6.5 6.5 C 6.5 6.837334 6.7739949 7.1113281 7.1113281 7.1113281 L 16.888672 7.1113281 C 17.226006 7.1113281 17.5 6.837334 17.5 6.5 C 17.5 6.1626667 17.226006 5.8886719 16.888672 5.8886719 L 7.1113281 5.8886719 z " />
+</svg>

novelwriter/assets/icons/typicons_dark/mixed_edit.svg

@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<svg
+   version="1.2"
+   width="24"
+   height="24"
+   viewBox="0 0 24 24"
+   id="svg7536"
+   sodipodi:docname="mixed_edit.svg"
+   inkscape:version="1.1.2 (0a00cf5339, 2022-02-04)"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:dc="http://purl.org/dc/elements/1.1/">
+  <sodipodi:namedview
+     id="namedview1259"
+     pagecolor="#505050"
+     bordercolor="#eeeeee"
+     borderopacity="1"
+     inkscape:pageshadow="0"
+     inkscape:pageopacity="0"
+     inkscape:pagecheckerboard="0"
+     showgrid="false"
+     inkscape:zoom="34.625"
+     inkscape:cx="8.7364621"
+     inkscape:cy="11.98556"
+     inkscape:window-width="2560"
+     inkscape:window-height="1330"
+     inkscape:window-x="0"
+     inkscape:window-y="0"
+     inkscape:window-maximized="1"
+     inkscape:current-layer="svg7536" />
+  <metadata
+     id="metadata7542">
+    <rdf:RDF>
+      <cc:Work
+         rdf:about="">
+        <dc:format>image/svg+xml</dc:format>
+        <dc:type
+           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+      </cc:Work>
+    </rdf:RDF>
+  </metadata>
+  <defs
+     id="defs7540" />
+  <path
+     id="path7534"
+     style="display:inline;fill:#aeaeae;fill-opacity:1;stroke-width:1.10527"
+     d="M 19.160156 0 C 18.73463 0 18.312122 0.160533 17.988281 0.484375 L 14.052734 4.421875 L 4.1054688 4.421875 C 3.4953635 4.421875 3 4.9141801 3 5.5253906 L 3 17.037109 L 3 18.429688 L 3 22.894531 C 3 23.505741 3.4953635 24 4.1054688 24 L 18.474609 24 C 19.084713 24 19.578125 23.505741 19.578125 22.894531 L 19.578125 18.429688 L 19.578125 17.037109 L 19.578125 9.9472656 L 23.515625 6.0117188 C 23.839466 5.6878766 24 5.2623116 24 4.8378906 C 24 4.4134695 23.839466 3.9918109 23.515625 3.6679688 L 20.332031 0.484375 C 20.008189 0.160533 19.584576 0 19.160156 0 z M 19.160156 2.4394531 L 21.560547 4.8398438 L 20.130859 6.2695312 L 17.730469 3.8691406 L 19.160156 2.4394531 z M 16.949219 4.6503906 L 19.349609 7.0507812 L 12.394531 14.005859 L 9.9941406 11.605469 L 16.949219 4.6503906 z M 5.2109375 6.6308594 L 11.841797 6.6308594 L 8.328125 10.146484 C 8.0042828 10.470327 7.7997073 11.043101 7.6328125 11.570312 C 7.4559704 12.122943 7.421875 12.737735 7.421875 13.195312 L 7.421875 16.578125 L 10.804688 16.578125 C 11.262267 16.578125 12.02928 16.467813 12.541016 16.257812 C 13.053858 16.047812 13.530778 15.874623 13.853516 15.550781 L 17.369141 12.158203 L 17.369141 17.037109 L 17.369141 18.429688 L 17.369141 21.789062 L 5.2109375 21.789062 L 5.2109375 18.429688 L 5.2109375 17.037109 L 5.2109375 6.6308594 z M 9.5644531 12.525391 L 11.505859 14.435547 L 9.6308594 14.369141 L 9.5644531 12.525391 z " />
+</svg>

novelwriter/assets/icons/typicons_dark/mixed_input-checked.svg

@@ -0,0 +1,39 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   width="24"
+   height="24"
+   version="1.2"
+   viewBox="0 0 24 24"
+   id="svg2287">
+  <defs
+     id="defs2291" />
+  <metadata
+     id="metadata2281">
+    <rdf:RDF>
+      <cc:Work
+         rdf:about="">
+        <dc:format>image/svg+xml</dc:format>
+        <dc:type
+           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+        <dc:title></dc:title>
+      </cc:Work>
+    </rdf:RDF>
+  </metadata>
+  <path
+     d="m17.714 22h-11.429c-2.3629 0-4.2857-1.9229-4.2857-4.2857v-11.429c0-2.3629 1.9229-4.2857 4.2857-4.2857h7.1429c0.79 0 1.4286 0.64 1.4286 1.4286 0 0.78857-0.63857 1.4286-1.4286 1.4286h-7.1429c-0.78857 0-1.4286 0.64143-1.4286 1.4286v11.429c0 0.78714 0.64 1.4286 1.4286 1.4286h11.429c0.78857 0 1.4286-0.64143 1.4286-1.4286v-4.2857c0-0.78857 0.63857-1.4286 1.4286-1.4286s1.4286 0.64 1.4286 1.4286v4.2857c0 2.3629-1.9229 4.2857-4.2857 4.2857z"
+     fill="#848484"
+     stroke-width="1.4286"
+     id="path2283" />
+  <path
+     d="m19.02 3.3503c-0.60933 0.010623-1.2003 0.31545-1.5586 0.86719l-5.0977 7.8477-2.3672-3.6445c-0.57329-0.88278-1.7442-1.1319-2.627-0.55859-0.88278 0.57329-1.1319 1.7461-0.55859 2.6289l3.9199 6.0391c0.38514 0.59307 1.0409 0.88965 1.6973 0.85352 0.03023-2.78e-4 0.05972-0.0041 0.08984-0.0059 0.0556-0.0057 0.11074-0.0088 0.16602-0.01953 0.52104-0.07621 1.0077-0.36147 1.3184-0.83984l6.6445-10.23c0.57329-0.88278 0.32419-2.0556-0.55859-2.6289-0.33104-0.21498-0.70276-0.31497-1.0684-0.30859z"
+     fill="#9c9"
+     stroke-linecap="round"
+     stroke-linejoin="round"
+     stroke-width="1.111"
+     id="path2285" />
+</svg>

novelwriter/assets/icons/typicons_dark/mixed_input-none.svg

@@ -0,0 +1,44 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   width="24"
+   height="24"
+   version="1.2"
+   viewBox="0 0 24 24"
+   id="svg2931">
+  <defs
+     id="defs2935" />
+  <metadata
+     id="metadata2925">
+    <rdf:RDF>
+      <cc:Work
+         rdf:about="">
+        <dc:format>image/svg+xml</dc:format>
+        <dc:type
+           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+        <dc:title></dc:title>
+      </cc:Work>
+    </rdf:RDF>
+  </metadata>
+  <path
+     d="m2 17.714v-11.429c0-2.3629 1.9229-4.2857 4.2857-4.2857h11.429c2.3629 0 4.2857 1.9229 4.2857 4.2857v7.1429c0 0.79-0.64 1.4286-1.4286 1.4286-0.78857 0-1.4286-0.63857-1.4286-1.4286v-7.1429c0-0.78857-0.64143-1.4286-1.4286-1.4286h-11.429c-0.78714 0-1.4286 0.64-1.4286 1.4286v11.429c0 0.78857 0.64143 1.4286 1.4286 1.4286h4.2857c0.78857 0 1.4286 0.63857 1.4286 1.4286s-0.64 1.4286-1.4286 1.4286h-4.2857c-2.3629 0-4.2857-1.9229-4.2857-4.2857zm15.714 4.2857h-11.429c-2.3629 0-4.2857-1.9229-4.2857-4.2857v-11.429c0-2.3629 1.9229-4.2857 4.2857-4.2857h7.1429c0.79 0 1.4286 0.64 1.4286 1.4286 0 0.78857-0.63857 1.4286-1.4286 1.4286h-7.1429c-0.78857 0-1.4286 0.64143-1.4286 1.4286v11.429c0 0.78714 0.64 1.4286 1.4286 1.4286h11.429c0.78857 0 1.4286-0.64143 1.4286-1.4286v-4.2857c0-0.78857 0.63857-1.4286 1.4286-1.4286s1.4286 0.64 1.4286 1.4286v4.2857c0 2.3629-1.9229 4.2857-4.2857 4.2857z"
+     fill="#848484"
+     stroke-width="1.4286"
+     id="path2927" />
+  <rect
+     x="7"
+     y="10.1"
+     width="10"
+     height="3.8"
+     rx="1.9"
+     ry="1.9"
+     fill="#f99157"
+     stroke-linecap="round"
+     stroke-linejoin="round"
+     stroke-width="1.111"
+     id="rect2929" />
+</svg>

novelwriter/assets/icons/typicons_dark/mixed_input-unchecked.svg

@@ -0,0 +1,39 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   width="24"
+   height="24"
+   version="1.2"
+   viewBox="0 0 24 24"
+   id="svg3574">
+  <defs
+     id="defs3578" />
+  <metadata
+     id="metadata3568">
+    <rdf:RDF>
+      <cc:Work
+         rdf:about="">
+        <dc:format>image/svg+xml</dc:format>
+        <dc:type
+           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+        <dc:title></dc:title>
+      </cc:Work>
+    </rdf:RDF>
+  </metadata>
+  <path
+     d="m17.714 22h-11.429c-2.3629 0-4.2857-1.9229-4.2857-4.2857v-11.429c0-2.3629 1.9229-4.2857 4.2857-4.2857h7.1429c0.79 0 1.4286 0.64 1.4286 1.4286 0 0.78857-0.63857 1.4286-1.4286 1.4286h-7.1429c-0.78857 0-1.4286 0.64143-1.4286 1.4286v11.429c0 0.78714 0.64 1.4286 1.4286 1.4286h11.429c0.78857 0 1.4286-0.64143 1.4286-1.4286v-4.2857c0-0.78857 0.63857-1.4286 1.4286-1.4286s1.4286 0.64 1.4286 1.4286v4.2857c0 2.3629-1.9229 4.2857-4.2857 4.2857z"
+     fill="#848484"
+     stroke-width="1.4286"
+     id="path3570" />
+  <path
+     d="m17.99 3.3379c-0.48501 0.025418-0.96034 0.23584-1.3125 0.62695l-4.6777 5.1953-1.332-1.4785c-0.70433-0.78223-1.9014-0.84495-2.6836-0.14062-0.78223 0.70433-0.84495 1.9014-0.14062 2.6836l1.5996 1.7754-1.5977 1.7754c-0.70433 0.78223-0.64161 1.9793 0.14062 2.6836 0.78223 0.70433 1.9773 0.64161 2.6816-0.14062l1.332-1.4785 1.332 1.4785c0.70433 0.78224 1.9014 0.84495 2.6836 0.14062 0.78223-0.70433 0.84495-1.9014 0.14062-2.6836l-1.5996-1.7754 4.9453-5.4922c0.70433-0.78223 0.64161-1.9793-0.14062-2.6836-0.39112-0.35216-0.88608-0.51175-1.3711-0.48633z"
+     fill="#d64848"
+     stroke-linecap="round"
+     stroke-linejoin="round"
+     stroke-width="1.111"
+     id="path3572" />
+</svg>

novelwriter/assets/icons/typicons_dark/mixed_search-replace.svg

@@ -36,4 +36,4 @@
      id="rect19553"
      d="m 2.4766359,18.937425 v 2.585938 h 2.5605469 z"
      style="display:inline;opacity:0.95;fill:#0a0a0a;fill-opacity:1;stroke:none;stroke-width:1.88249397;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1" />
-</svg>
+</svg>

novelwriter/assets/icons/typicons_dark/nw_deco-h0.svg

@@ -1,31 +1,35 @@
 <?xml version="1.0" encoding="UTF-8" standalone="no"?>
 <svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   id="svg5204"
-   viewBox="0 0 24 24"
+   version="1.2"
+   width="4"
    height="24"
-   width="24"
-   version="1.2">
+   viewBox="0 0 4 24"
+   id="svg2161"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:dc="http://purl.org/dc/elements/1.1/">
   <metadata
-     id="metadata5210">
+     id="metadata2167">
     <rdf:RDF>
       <cc:Work
          rdf:about="">
         <dc:format>image/svg+xml</dc:format>
         <dc:type
            rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-        <dc:title></dc:title>
       </cc:Work>
     </rdf:RDF>
   </metadata>
   <defs
-     id="defs5208" />
-  <path
-     style="stroke-width:1.25;fill:#aeaeae;fill-opacity:1"
-     id="path5202"
-     d="M 19.5,9.5 H 4.5 C 3.12,9.5 2,10.62 2,12 c 0,1.38 1.12,2.5 2.5,2.5 h 15 C 20.88,14.5 22,13.38 22,12 22,10.62 20.88,9.5 19.5,9.5 Z" />
+     id="defs2165" />
+  <rect
+     style="fill:#848484;fill-opacity:1;stroke-width:0;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:0.2"
+     id="rect1955"
+     width="4"
+     height="22"
+     x="0"
+     y="1"
+     rx="2"
+     ry="2" />
 </svg>

novelwriter/assets/icons/typicons_dark/nw_deco-h1.svg

@@ -1,31 +1,35 @@
 <?xml version="1.0" encoding="UTF-8" standalone="no"?>
 <svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   id="svg5204"
-   viewBox="0 0 24 24"
+   version="1.2"
+   width="4"
    height="24"
-   width="24"
-   version="1.2">
+   viewBox="0 0 4 24"
+   id="svg2161"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:dc="http://purl.org/dc/elements/1.1/">
   <metadata
-     id="metadata5210">
+     id="metadata2167">
     <rdf:RDF>
       <cc:Work
          rdf:about="">
         <dc:format>image/svg+xml</dc:format>
         <dc:type
            rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-        <dc:title></dc:title>
       </cc:Work>
     </rdf:RDF>
   </metadata>
   <defs
-     id="defs5208" />
-  <path
-     style="stroke-width:1.25;fill:#aeaeae;fill-opacity:1"
-     id="path5202"
-     d="M 19.5,9.5 H 4.5 C 3.12,9.5 2,10.62 2,12 c 0,1.38 1.12,2.5 2.5,2.5 h 15 C 20.88,14.5 22,13.38 22,12 22,10.62 20.88,9.5 19.5,9.5 Z" />
+     id="defs2165" />
+  <rect
+     style="fill:#99cc99;fill-opacity:1;stroke-width:0;stroke-linecap:round;stroke-linejoin:round;stroke-opacity:0.2"
+     id="rect1955"
+     width="4"
+     height="22"
+     x="0"
+     y="1"
+     rx="2"
+     ry="2" />
 </svg>